• Journal of Hydrospace Technology
• /
• 제2권1호
• /
• pp.1-9
• /
• 1996

We consider the following two questions mainly in this study. First one is how the free surface hayes affect the lift of a shallowly submerged moving body. For this matte., we reinterpret the theoretical results of Kochin(1936), and point out that the high Froude number approximation is not always on the safer side. Second one is what sort of dimensionless parameters determine the occurrence of wave breaking behind a moving submerged body. Temporarily before getting a better answer, we propose that the two-parameter-plane, namely, the plane of the Froude number and the square root of the ratio of the submerged depth and the body length, may be used for predicting the possibility of wave breaking behind the submerged body. A region in the parameter plane is put forth as that of wave breaking, and the validity of this proposal is shown by its agreement with the existing experimental data of Parkin et al(1955) and those of Duncan(1983). Finally, linear and nonlinear numerical results are compared with the existing experimental data to see in what range of the parameters the linear and nonlinear theory case predict the wave field and the pressure on the body with reasonable accuracy. However, since the experimental data, which offer both the pressure and wave elevation for a submerged moving body, are very scarce, much cannot be attained through this comparative study. Hence, it is strongly recommended to carry out well planned experiments to get such data.

• 한국광학회지
• /
• 제8권4호
• /
• pp.267-276
• /
• 1997

서로 대칭되는 이중 조명을 이용한 홀로그래피 네파간섭계를 구성하여 횡변위와 종변위를 동시에 측정하였다. 물체파와 재생파의 간섭을 일으킨 후 위상이동법으로 변위위상도를 작성하였으며 최소제곱법맞춤으로 위상도의 잡음을 제거하였다. 이러한 방법으로 네파간섭계의 두 광로에 존재하는 위성의 차와 합에 대한 정보를 구하였으며, 파장 632.8 nm인 헬륨-네온 레이저 광선에 대하여 종변위와 횡변위는 각각 정밀도 .lambda./40 및 .lambda./100 이내로 측정되었다.

• 한국해안·해양공학회논문집
• /
• 제22권3호
• /
• pp.163-170
• /
• 2010

평면파 근사식에 기초한 지형에 의한 파랑변형 모형인 산란체법과 변환행렬법을 비교하여 특성을 분석하였다. 산란체법의 결과가 기존 엄밀해에 보다 근접하고 내재한 물리현상을 보다 명확히 설명하는 것으로 평가된다. 이들은 해석해로 계산이 빠르고 용이하며 지형이 비교적 단순한 경우에는 상당한 정밀도를 보인다.

• 한국음향학회지
• /
• 제34권6호
• /
• pp.493-498
• /
• 2015

물로 채워진 음향 펄스 튜브 내에는 가진 조건들에 따라 복잡한 형태의 음향 신호들이 형성될 수 있다. 이는 펄스 튜브를 이용해 저주파수 대역에서 평면파 반사계수를 측정하는 것을 어렵게 한다. 본 연구에서는 COMSOL Multiphysics를 이용하여 튜브 벽이 가진되는 경우 펄스 튜브 내에 평면파 뿐 아니라 비평면파 모우드의 복잡한 음장이 발생됨을 보였다. 모우드 분리 방법인 이차원 푸리에 필터링으로 입사 또는 반사하는 평면파 모우드만을 각각 분리할 수 있었다. 이에 시간 게이팅을 적용하므로 음향 시편의 평면파 반사계수를 보다 정확하게 결정할 수 있게 하였다.

• 대한조선학회논문집
• /
• 제53권4호
• /
• pp.307-314
• /
• 2016

Energy flow analysis(EFA) is a representative method that can predict the statistical energetics of structures at high frequencies. Generally, as the frequency increases, the shear distortion and rotatory inertia effects in the out-of-plane motion of beams or plates become important. Therefore, to predict the out-of-plane energetics of coupled structures in the high frequency range, the energy flow analyses of Timoshenko beam and Mindlin plate are required. Unlike the energy flow model of Kirchhoff plate, the energy flow model of Mindlin plate is composed of three kinds of energy governing equations(out-of-plane shear wave, bending dominant flexural wave, and shear dominant flexural wave). This paper performed the energy flow finite element analysis(EFFEA) of coplanar coupled Mindlin plates. For EFFEA of coplanar coupled Mindlin plates, the energy flow finite element formulation of out-of-plane energetics in the Mindlin plate was performed. The general EFFEA program was implemented by MATLAB® language. For the verification of EFFEA of Mindlin plate, the various numerical applications were done successfully.

• Steel and Composite Structures
• /
• 제22권3호
• /
• pp.567-587
• /
• 2016

The present investigation is to study the plane wave propagation and reflection of plane waves in a homogeneous transversely isotropic magnetothermoelastic medium with two temperature and rotation in the context of GN Type-II and Type-III (1993) theory of thermoelasticity. It is found that, for two dimensional assumed model, there exist three types of coupled longitudinal waves, namely quasi-longitudinal wave (QL), quasi-transverse wave (QTS) and quasi-thermal waves (QT). The different characteristics of waves like phase velocity, attenuation coefficients, specific loss and penetration depth are computed numerically and depicted graphically. The phenomenon of reflection coefficients due to quasi-waves at a plane stress free with thermally insulated boundary is investigated. The ratios of the linear algebraic equations. These amplitude ratios are used further to calculate the shares of different scattered waves in the energy of incident wave. The modulus of the amplitude and energy ratios with the angle of incidence are computed for a particular numerical model. The conservation of energy at the free surface is verified. The effect of energy dissipation and two temperatures on the energy ratios are depicted graphically and discussed. Some special cases of interest are also discussed.

• 물과 미래
• /
• 제29권5호
• /
• pp.139-150
• /
• 1996

본 논문에서는 수리학적 유역추적 모형인 선형 Muskingum-Cunge(M-C)법에 있어서 격자간격과 같은 수치적 인자의 변화가 단위폭사면에서의 유출수문곡선에 미치는 영향을 소개한다. 수치계산의 결과에 의하면, 유출특성은 수치적 또는 물리적으로 의미를 갖는 Courant 수 C 및 cell Reynolds 수 D의 값에 좌우되는데, C 값은 1에 접근할수록 D 값은 증가할수록 수치분산에 의한 진동은 발생하기 어렵다. C<1인 경우는 수치진동이 이동파의 전방에 발생한다. C>1인 경우는 파의 후방에 발생하는데, 이 때는 수치확산의 효과로 인해 수치진동은 작아지거나 사라진다. 특성구간길이 L의 값이 작은 사면(예, 급경사사면)의 경우, M-C법은 kinematic 법과 마찬가지로 파의 감쇠를 보이지 않는다. 한편 L의 값이 큰 사면(예, 완경사 사면)에서는 M-C법은 큰 거리격자간격 (Δx)에서도 큰 D(= L/ΔX)의 값을 갖게 되어 C에 거의 관계없이 diffusion wave를 잘 재현한다. 따라서 완경사 유역의 추적에 있어 M-C 법의 적용은 매우 유효하리라고 생각된다.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.766-772
• /
• 2003

The pseudospectral method for stability analysis was used to find the most influential disturbance mode for transition of plane channel flows and Blasius flow at their critical Reynolds numbers. A number of various oblique disturbance waves were investigated for their pseudospectra and resolvent norm contours in each flow, and an exhaustive search method was employed to find the disturbing waves to which the flows become most unstable. In plane Poiseuille flow an oblique disturbance with a wavelength of 3.59h (where h is the half channel width) at an angle $28.7^{\circ}$ was found to be the most influential for the flow transition to turbulence, and in plane Couette flow it is an oblique wave with a wavelength of 3.49h at an angle of $19.4^{\circ}$. But in Blasius flow it was found that the most influential mode is a normal wave with a wavelength of $3.44{\delta}_{999}$. These results imply that the most influential disturbance mode is closely related to the fundamental acoustic wave with a certain shear sheltering in the respective flow geometry.

• Geomechanics and Engineering
• /
• 제17권3호
• /
• pp.295-305
• /
• 2019

The bedding plane has a significant influence on the effect of blasting fragmentation and the overall performance of underground mining. This paper explores the effects of fragmentation of the bedding plane and different angles by using the numerical analysis. ANSYS/LS-DYNA code was used for the implementation of the models. The models include a dynamic compressive and tensile failure which is applied to simulate the fractures generated by the explosion. Firstly, the cracks propagation with the non-bedding plane in the coal with two boreholes detonated simultaneously is calculated and the particle velocity and maximum principal stress at different points from the borehole are also discussed. Secondly, different delay times between the two boreholes are calculated to explore its effects on the propagation of the fractures. The results indicate that the coal around the right borehole is broken more fully and the range of the cracks propagation expanded with the delay time increases. The peak particle velocity decreases first and then increases with the distance from the right borehole increasing. Thirdly, different angles between the bedding plane and the centerline of the two boreholes and the transmission coefficient of stress wave at a bedding plane are considered. The results indicated that with the angles increase, the number of the fractures decreases while the transmission coefficient increases.

• 대한전자공학회논문지
• /
• 제10권3호
• /
• pp.53-60
• /
• 1973

압전결정 LiMbO3와 LiTaO3의 로테이트 Y캇트, X전반의 탄성표면파(Rayleigh 표면파)의 위상속도 및 지연시간의 온도계수를 수치해석방법에 의해서 계산하였으며 LiNbO3 130°로테이트 Y캇트, 총전반의 탄성표면파의 온도계수를 액체 He의 온도로부터 실온까지 측정하였다. 이 지연시간의 온도계수의 실험치 70×10-6/℃는 계산치 72.7×10-6/℃와 잘 일치함을 확인하였다. 또한 LiNbO3 130° 로테이트 Y캇트, X전반의 탄성표면파의 지연시간의 온도계수는 액체 He온도근처에서 약 16×10-6/℃로 작아짐을 알았다.