• 제목/요약/키워드: plan-coordination

검색결과 155건 처리시간 0.024초

지상변압기의 내부 보호장비 작동을 위한 MCA 보호협조에 대한 연구 (A study on Protective Coordination of MCA for Performing of the Pad Mounted Transformer's inside Protective Device)

  • 현승윤;김창환
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제8권1호
    • /
    • pp.5-7
    • /
    • 2022
  • KEPCO's plan is undergoing a trial operation to replace the open-loop section with ring main units configuration where underground distribution lines are installed, by linking the multi-way circuit breakers auto (MCA) on the power side of each pad-mounted transformer. However, ring main units application mentioned above may cause the ripple effects, when implementing the configuration without a study of protection coordination. Because ring main units with classical pre-set protection devices contribution in fault condition didn't consider yet. For the reliable ring main units operation, it is necessary to resolve several protection issues such as the protection coordination with substation side, prevention of the transformer inrush current. These issues can radically deteriorate the distribution system reliability Hence, it is essential to design proper protection coordination to reduce these types of problems. This paper presents a scheme of ring main units' configuration and MCA's settings of time-current curves to preserve the performance of protection coordination among the switchgears considering constraints, e.g. prevention of the ripple effects (on the branch section when a transformer failure occurs and the mainline when a branch line failure occurs). It was confirmed that the propagation of the failure for each interrupter segment could be minimized by applying the proposed TCC and the interrupter settings for the MCAs (branch, transformer). Further, it was verified that the undetected area of the distribution automation system (DAS) could be supplemented by having the MCA configurated ring main units operate first, instead of the internal protection equipment in the transformer such as the fuse, STP when a transformer failure occurs.

공동주택 안목치수 설계기준에 의한 붙박이장의 표준화방안 연구 (A Study on the Standardization of the Built-in Wardrobe by Housing Inside Dimension)

  • 이가경;임석호
    • 한국주거학회논문집
    • /
    • 제21권6호
    • /
    • pp.53-60
    • /
    • 2010
  • Built-in wardrobe is constructing after ordering and making, because built-in wardrobe's size is fixed as housing measurement. It is hard to speak built-in wardrobe components of construction in these ways, and application of an MC (Modular Coordination) design system is meaningless too. And above all, measurement before construction isn't to expect standardization, and to increase custom-made furniture. So I suggest the standardization of built-in wardrobe utilizing standard last finish and reference plane in order to prevent an evil influence of built-in wardrobe's construction. And we utilized a reference plane, and we present construction document and design plan in order to solve these problems. The first stage, we investigate manufacture of a preferential domestic system kitchen and construction state, and we derive from a problem in viewpoints of standardization for this. And we analyze an effect got by application of the assembly basis aspect that we presented, and we can raise efficiency of standardization of housing and construction industry, and we light ultimately up. I will apply a standardization plan as above, and define that this assures a standardization of components and an economic effect.

연안침식방지를 위한 관리체계 개선방안 (A Study on Improvement of Management Framework for Coastal Erosion Protection)

  • 이문숙;박성욱
    • Ocean and Polar Research
    • /
    • 제29권2호
    • /
    • pp.155-165
    • /
    • 2007
  • Recently, coastal erosion has become an important issue in relation to keeping territorial integrity of a nation as well as protecting the coastal marine ecosystem. This study examines some apprehensions about the effectiveness of the existing legal system concerning prevention of coastal erosion. After examining several case studies in Scotland, the USA, and the Netherlands, this study proposes appropriate revisional legal measures that can be applied in Korea: first, the coastal management act should be revised for stronger, enforceable and practical legal grounds emphasizing minimal coastal erosion; second, the proposed "Comprehensive Coastal Erosion Prevention Plan" should be established and implemented in four steps such as characterization of issues through surveys of stakeholders and demand assessment, plan establishment, execution, and maintenance and management; third, there is a demand to establish and implement a legal framework to support monitoring activities which provide important data and information to prevent coastal erosion; fourth, the chronic region of damage is designated as the "Vulnerable Area" to be protected and managed accordingly; fifth, the "Coastal Coordination council" is established and operated for developing an integrated coastal management policy and visions for sustainable coastal zone, as well as coordinating and intervention of any activities which may cause coastal erosion.

방산육성 기본계획 기반 군수품(군용차량) 생산량 증진 방안 연구 (Study on Increase the Production of Materiel(Military Vehicles) based 'Basic Plan for Defense Industry Promotion')

  • 이범구;이석희;계중읍;이춘범;정도현;이천수
    • 한국자동차공학회논문집
    • /
    • 제22권3호
    • /
    • pp.25-32
    • /
    • 2014
  • There are many type vehicles in army. They are jeep and truck by basic type. Recently many countries are developing new conceptual military vehicles. And they try for export of those military vehicles to another countries. Also Korea Army is developing military tactical and combat vehicles, and considering various necessary factors for export. But as easing the cold war system tension and reducing of defense budget, decrease in quantity of military vehicles. We think this trend is accelerative. Therefore Government(Military) and defense industry make every effort to increasing sales and productions. In this study, I'll inquire '2013~2017 basic plan for defense industry promotion' for strengthen the power of international competitiveness, and then suggest the increasing method for productions of military vehicles.

The Evolution of Korea's Basic Acts on Science and Technology and their Characteristics

  • Lee, Changyul;Lee, Elly Hyanghee;Kim, Seongsoo
    • Asian Journal of Innovation and Policy
    • /
    • 제10권3호
    • /
    • pp.355-379
    • /
    • 2021
  • This study examined the evolution of S&T Basic Acts in Korea from the Science and Technology Promotion Act (1967) through the Special Act on STI (1997) to the Framework Act on Science and Technology (2001) in the following aspects: 1) comprehensive plans, 2) coordination mechanisms for S&T policies, 3) enforcement of R&D programs and performance diffusion, 4) promotion of human resources, 5) and S&T investment and budgeting. Before the Framework Act on S&T was enacted in 2001, critical issues were found in establishing S&T master plans, promotion of R&D programs, comprehensive coordination mechanisms, and R&D budgeting. The three Basic Acts have expanded the scope of regulation over time to cover the entire cycle of the S&T process. They concern a wide range of issues, including creating a basis for scientific and technological development, S&T promotion, disseminating and commercializing research outcomes, and preventing adverse effects from science and technology. The content of the Basic Acts has evolved in response to changes in the political, economic, and social environment of Korean industry during the past five decades.

목조주택 모형개발을 위한 평면모듈 설정에 대한 연구 - 기둥-보 방식 구조를 중심으로 - (A study on the Plan Modular Establishment for the Development of Wooden Dwelling Model - Focused on the Post & Beam Structure -)

  • 강만호;주석중;김재덕
    • 한국주거학회논문집
    • /
    • 제18권1호
    • /
    • pp.141-148
    • /
    • 2007
  • In this research, to develope wooden house model with post & beam structure which is commensurate with domestic environment, we analyzed the size and module of a unit space and space organization of existing habitation, then, based on the result, we tried to suggest general wood house modules. For this, we investigated 98 floor plans for 30 pyeong apartment in Seoul, Gyounggi-do, Gwangju, and Jeolla-do. The results are showed as follows. 1) It has shown that 7 posts distances are available in 2 bay floor plan type - 3.0 m, 3.3 m, 3.6 m, 3.9 m, 4.2 m, 4.5 m, and 4.8 m. 2) It has shown that 8 posts distances are available in 3 bay floor plan type - 3.0 m, 3.3 m, 3.6 m, 3.9 m, 4.2 m, 4.5 m, 4.8 m, and 5.1 m. It was concluded as follows, applying the standard of regulations of horizontal modular coordination design, from $\ulcorner$the standard of modular coordination design in architecture(KSF 1525)$\lrcorner$. 1) The available widths are 3.0 m, 3.3 m, 3.6 m, 4.2 m, and 4.8 m, and the available depths are 3.0 m, 3.3 m, 3.6 m, and 4.2 m. 2) To guarantee a space through post module of a room combination, we can use a module of 3.6 m, 4.2 m, 4.8 m except 3.0 m, 3.3 m among available modules. The module investigated in post & beam structure wooden house is applied in basic 6 floor plans as follows. 1) When organize the room on the basis of tile module of 3.6 m, 4.2 m, it was possible to organize the floor plan. 2) After arranging main room, making practical application of variableness which is advantage of post & beam structure, putting to practical use of extra space that becomes the combination of atypical room such as kitchen, dining room, and bathroom, it was possible to organize the floor plan of the residence. 3) It is possible to organize whole rooms through the plan module from 3.6 m to 4.2 m, that decides the floor plan of a wooden house.

영국의 Sissinghurst castle garden이 주는 지역 활성화 효과 (The Effect of Local Activation Given by Sissinghurst Castle Garden in England)

  • 정정섭;조태동
    • 농촌계획
    • /
    • 제4권1호
    • /
    • pp.56-62
    • /
    • 1998
  • This study makes a general view of human-, natural environment, actual condition of use, management and administration of Sissinghurst castle garden and proposes the following directions for our model of herb industry, herb garden plan with the analysed results. 1) The location of herb garden should be selected at a place where Is close to scenic spots, sight-seeing place or big city and conveniently situated, 2) For the basic design of herb garden, the ecological features, human -, natural environment should be analysed and for the implementation of the plan, it should have variety and coordination to give the pleasure and appreciation to the users. 3) For the plan of herb garden, time limit system and number limit admission have to be introduced by calculating carrying capacity so that the user can have a comfortable atmosphere and the garden should be environment - friendly.

  • PDF

조립기준면을 활용한 시스템키친의 표준화 연구 (A Study on the Standardization of the System Kitchen by Utilizing Reference Plane)

  • 이가경;임석호
    • 한국주거학회논문집
    • /
    • 제21권6호
    • /
    • pp.43-52
    • /
    • 2010
  • It has applied the design method of face to face dimension, an MC (Modular Coordination) design method, at design steps of an apartment house for standardization of architecture. But It has been still using center line size. A construction limit isn't specific on these center line size, and dead space occurs with excessive gaps as size matching isn't performed well between structural sieve and parts. And above all, measurement before construction isn't to expect standardization, and to increase custom-made furniture. We investigate manufacture of a preferential domestic system kitchen and construction state, and we derive from a problem in viewpoints of standardization for this. And we utilized a reference plane, and we present construction document and design plan in order to solve these problems. And we analyze an effect got by application of the assembly basis aspect that we presented, and we can raise efficiency of standardization of housing and construction industry, and we light ultimately up.

Action to Improve the Reliability of Production Planning

  • Kim Daeyoung
    • 한국건설관리학회논문집
    • /
    • 제3권4호
    • /
    • pp.139-144
    • /
    • 2002
  • Management of today's dynamic projects requires a shift of focus from product to process. The purpose of traditional project controls is to conform performance to plan. The purpose of lean project controls is to make the best possible choices at each point in time during the course of the project, as well as contributing knowledge to the parent organizations so they can learn from project experience. The Lean Construction Institute(LCI) proposed the Last Planner System(LPS) capable of accomplishing that purpose, principally through controlling the quality of planning and of management processes themselves, as distinct from concentrating exclusively on project performance. The case project was a pilot project for the implementation of the Last Planner. Consequently, the coordination of the work on this project was extremely successful. The project had its share of challenges. The coordination did not prevent design problems, or supplier errors, but helped the team deal with the problems effectively while maintaining the work flow. The last planner helped the contractors know: a) who will be doing what and where, b) what each one needs from the others, and c) what are the project priorities. The system itself created a more collaborative environment, because it 'demands' that the subcontractors address these issues.

전력보상설비의 상호 협조제어에 따른 운영여유용량의 확보 (Securing Operation Margin Capacity as Coordination Control among the Power Compensation Equipments)

  • 이상덕;백영식
    • 전기학회논문지
    • /
    • 제59권6호
    • /
    • pp.1011-1016
    • /
    • 2010
  • It is an important issue to electric power system operations that it can reliably supply large-capacity power to consumption area as due to increasing power demand growth. For this purpose, The FACTS equipment based on Power IT technology with the existing mechanical compensators has been applied to power system. Therefore we suggest on this paper that a plan for coordination control of multiple power compensation equipment in order to increase the utilization of each facility and secure operation margin capacity. As the result of simulation, it is possible to cope actively with a suddenly changed power system. This helps greatly for the voltage stability and supply reliability in a suddenly changed power system.