De Molon, Rafael Scaf;Morais-Camillo, Juliana Aparecida Najarro Dearo;Sakakura, Celso Eduardo;Ferreira, Mauricio Goncalves;Loffredo, Leonor Castro Monteiro;Scaf, Gulnara
Imaging Science in Dentistry
/
제42권4호
/
pp.243-247
/
2012
Purpose: This study was performed to compare the inverted digital images and film-based images of dry pig mandibles to measure the periodontal bone defect depth. Materials and Methods: Forty 2-wall bone defects were made in the proximal region of the premolar in the dry pig mandibles. The digital and conventional radiographs were taken using a Schick sensor and Kodak F-speed intraoral film. Image manipulation (inversion) was performed using Adobe Photoshop 7.0 software. Four trained examiners made all of the radiographic measurements in millimeters a total of three times from the cementoenamel junction to the most apical extension of the bone loss with both types of images: inverted digital and film. The measurements were also made in dry mandibles using a periodontal probe and digital caliper. The Student's t-test was used to compare the depth measurements obtained from the two types of images and direct visual measurement in the dry mandibles. A significance level of 0.05 for a 95% confidence interval was used for each comparison. Results: There was a significant difference between depth measurements in the inverted digital images and direct visual measurements (p>|t|=0.0039), with means of 6.29 mm ($IC_{95%}$:6.04-6.54) and 6.79 mm ($IC_{95%}$:6.45-7.11), respectively. There was a non-significant difference between the film-based radiographs and direct visual measurements (p>|t|=0.4950), with means of 6.64mm($IC_{95%}$:6.40-6.89) and 6.79mm($IC_{95%}$:6.45-7.11), respectively. Conclusion: The periodontal bone defect measurements in the inverted digital images were inferior to film-based radiographs, underestimating the amount of bone loss.
병원에서 정형보철용 재료로 사용하는 스테인리스와 티타늄 금속을 같은 크기로 제작하여 자기공명영상에 미치는 영상학적 진단가치를 비교하였다. 영상의중심(Center), 영상이외부분(Background), 고 신호부분(High band)에 대한 신호강도 값을 가중치로 변환하여 금속시험편 없는(Norma)영상과 비교하였다. 또한 시상면영상과 횡단면영상의 왜곡범위를 정량적으로 수치화하여 금속시험편 없는 영상면적과 비교하였다. 그 결과 고 신호영상의 신호강도 값은 스테인리스의 경우 팬텀(Phantom) 2, 돼지 뼈(Bone) 1.8, 티타늄의 경우 팬텀 1.7, 돼지 뼈 1.3 만큼 금속시험편 없는 신호강도가중치 값보다 높은 것을 알 수 있었다. 또한 자기공명영상의 왜곡형태와 왜곡 범위는 금속시험편이 없는 영상의 단면적대비 스테인리스의 경우 팬텀 65.8 %, 돼지 뼈 61.5 %, 티타늄은 팬텀 23.1 %, 돼지 뼈 38.5 % 의 왜곡범위를 나타냈다. 결론적으로 본 실험에서는 신호강도가중치값과 왜곡범위가 낮게 변화를 보인 티타늄이 스테인리스 시험편보다 더 진단적 가치가 높은 자기공명영상임을 알 수 있었다.
Wang, Wenjun;Hu, Xiaoxiang;Fei, Jin;Meng, Qinyong;Li, Ning
Asian-Australasian Journal of Animal Sciences
/
제20권10호
/
pp.1490-1495
/
2007
Insulin-like growth factor binding protein-4 (IGFBP-4) is a member of the IGF super family, and regulates the action of IGFs. The polymorphism of porcine IGFBP-4 gene in 17 pig breeds (total n = 570) was detected by PCR-SSCP, and alleles A and B were detected. In these pig breeds, it was found that exotic pig breeds carried high frequencies of allele A, while Chinese native pig breeds carried high frequencies of allele B. The role of porcine IGFBP-4 was investigated in 172 F2 offspring of a $Lantang{\times}Lantang $ population. Forty eight growth traits were recorded for analyzing the association between IGFBP-4 gene polymorphism and quantitative performance traits. In this resource family, pigs with AA genotype had higher fore-body weight, bone weight of mid-body, bone weight of rear-body, fore-leg weight and rear-leg weight than those pigs with BB genotype (p<0.05); while pigs which carried BB genotype had higher back-fat thickness at C point and lard weight than those pigs with AA genotype (p<0.05); pigs with AA genotype had higher body weight than those with BB genotype; for meat quality traits, pigs with AA genotype had higher meat color than those of BB genotype (p<0.01), and pigs with BB genotype had higher marbling than those of AA and AB genotypes (p<0.01 and p<0.05, respectively).Based on these results, it is necessary to do more studies on IGFBP-4 before using the IGFBP-4 locus for the application of marker-assisted selection programs.
이 연구는 비타민 C 결핍이 guinea pig에서의 실험적 치아이동속도와 치조골 개조에 미치는 영향을 알아보고자 시행되었다 이를 위하여 웅성 guinea pig 30마리를 대상으로 정상량의 비타민 C (5 mg/day) 를 투여한 군(정상군)과 결핍량(0.2mg/day)을 투여한 군(결핍군)으로 나누고 치아이동 실험을 시행하였다. 초기 교정력 75gm으로 상악의 좌우 중절치를 이개시키는 치아이동을 시행하고, 순차적으로 실험 경과기간이 지나면 치아이동양을 계측하고 희생시켜 조직 소견을 관찰하였다. 실험 결과. 결핍군에서 치조골과 치주인대의 교원섬유 함량은 현저한 감소와 불규칙한 배열을 보였으며 인대세포의 수적 감소 및 출혈이 관찰되었고 치조골에서 골형성의 감소와 파골세포의 출현 및 골소강의 크기증가와 골소강내의 다수의 파골세포가 관찰되었다. 정상군의 인장측 치조골은 치아이동 시간경과에 따라 조골세포와 골형성이 지속적인 증가를 보였으나, 결핍군에서는 조골세포가 감소하고 골형성은 미약한 양상을 보였다. 치아 이동양은 실험 초기 1일, 3일, 5일, 7일 결핍군의 치아이동양이 정상군보다 많게 나타났다 (p<0.05) 이상의 결과에서 비타민 C 결핍은 치주조직의 교원질의 합성을 억제하여 치조골의 형성을 감소시키고 흡수를 증가시키는 골개조를 초래하며, 치아이동중 인장측 치조골 형성을 억제하고 압박측 치조골 흡수를 촉진하여 치아이동 초기에는 빠른 치아이동을 가져오는 것을 시사한다.
Kim, E.H.;Choi, B.H.;Kim, K.S.;Lee, C.K.;Cho, B.W.;Kim, T.-H.;Kim, J.-J.
Asian-Australasian Journal of Animal Sciences
/
제20권5호
/
pp.669-676
/
2007
This study was conducted to detect quantitative trait loci (QTL) affecting growth and body composition in an $F_2$ reference population of Korean native pig and Landrace crossbreds. The three-generation mapping population was generated with 411 progeny from 38 $F_2$ full-sib families, and 133 genetic markers were used to produce a sex-average map of the 18 autosomes. The data set was analyzed using least squares Mendelian and parent-of-origin interval-mapping models. Lack-of-fit tests between the models were used to characterize QTL for mode of expressions. A total of 8 (39) QTL were detected at the 5% genome (chromosome)-wise level for the 17 analyzed traits. Of the 47 QTL detected, 21 QTL were classified as Mendelian expressed, 13 QTL as paternally expressed, 6 QTL as maternally expressed, and 7 QTL as partially expressed. Of the detected QTL at 5% genome-wise level, two QTL had Mendelian mode of inheritance on SSC6 and SSC9 for backfat thickness and bone weight, respectively, two QTL were maternally expressed for leather weight and front leg weight on SSC6 and SSC12, respectively, one QTL was paternally expressed for birth weight on SSC4, and three QTL were partially expressed for hot carcass weight and rear leg weight on SSC6, and bone weight on SSC13. Many of the Mendelian QTL had a dominant (complete or overdominant) mode of gene action, and only a few of the QTL were primarily additive, which reflects that heterosis for growth is appreciable in a cross between Korean native pig and Landrace. Our results indicate that alternate breed alleles of growth and body composition QTL are segregating between the two breeds, which could be utilized for genetic improvement of growth via marker-assisted selection.
The purpose of this study was to observe the effect of TGF-βl, which promotes differentiation and proliferation of osteoblasts, on bone regeneration. Experimental bone defects that measured 3 mm in diameter were created on the mandibles of guinea pig by removal of bone with the use of trephine burs. In one side of mandibular body, the experimental groups, bone defects were grafted with Biogran(Orthovita Co., U.S.A) and TGF-β1(R&D System Co., U.SA). In the remaining side of the mandiblar body, the control groups, bone defects were grafted with only Biogran. Guinea pigs in the control and experimental groups were serially terminated by fours on the 3 days, the 1 week, the 2 weeks, the 3 weeks, and the 4 weeks after experiment, and both sides of the mandibular bodies were removed and fixed with 10% neutral formalin. They were decalcified and embedded in paraffin as using the usual method. The specimen sectioned and stained with hematoxylin and eosin. Also, they were radiographed with a soft X -ray apparatus. The obtained results were as follows; 1. Hemorrhagic condition, observed in the granulation tissues, disappeared on the 1 week after experiment in both groups, and more prominent in the experimental group. The granulation tissues of the experimental group had larger number of cells than those of the control group. 2. Osteoblastic differentiation in the margin of grafted material and adjacent bone was observed on the 1 week after experiment in both groups. Also, bone formation was observed in immature form on the 1 week after experiment. and more prominent in the experimental group. 3. In the polarizing microscopic examination, bone matrix was very loose on the 1 week after experiment, but increase in density with time, and more prominent in the experimental group. 4. In the microradiographic examination, newly formed bone was observed in the experimental group on the 2 weeks after experiment, and this was observed earlier than in the control group. Newly formed bone was increased with time and defected area was markedly decreased on the 4 weeks after experiment.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제39권3호
/
pp.120-126
/
2013
Objectives: This study sought to elucidate the effect of autogenous tooth bone material by experimenting on minipig's maxillary sinus and performing histological and histomorphometric analyses. Materials and Methods: Five 18-24 month-old male minipigs were selected, and right maxillary sinuses were grafted with bone graft material made of their respective autogenous teeth extracted eight weeks earlier. The left sides were grafted with synthetic hydroxyapatite as control groups. All minipigs were sacrificed at 12 weeks after bone graft, which was known to be 1 sigma (${\sigma}$) period for pigs. Specimens were evaluated histologically under a light microscope after haematoxylin-eosin staining followed by semi-quantitative study via histomorphometric analysis. The ratio of new bone to total area was evaluated using digital software for calculation of area. Results: All specimens were available, except one on the right side (experimental group), which was missing during specimen preparation. This study demonstrated new bone at the periphery of the existing bone in both groups, showing evidence of bone remodeling, however, encroachment of new bone on the central part of the graft at the 1 ${\sigma}$ period was observed only in the autogenous tooth bone group (experimental group). Histomorphometric analysis showed more new bone formation in the experimental group compared to the control group. Although the difference was not statistically significant (P>0.05), the mean percentage area for new bone for the experimental and control groups were $57.19%{\pm}11.16%$ and $34.07%{\pm}13.09%$, respectively. Conclusion: The novel bone graft material using autogenous tooth is a good alternative to autogenous bone, comparable to autogenous bone, and outperforming synthetic hydroxyapatite bone graft materials in terms of bone regeneration capacity. Augmentation with autogenous tooth bone materials will reduce donor site morbidity without hampering the safety of the autogenous bone graft.
In the last few decades, transgenic animal technology has witnessed an increasingly wide application in animal breeding. Reproductive traits are economically important to the pig industry. It has been shown that the bone morphogenetic protein receptor type IB (BMPR1B) A746G polymorphism is responsible for the fertility in sheep. However, this causal mutation exits exclusively in sheep and goat. In this study, we attempted to create transgenic pigs by introducing this mutation with the aim to improve reproductive traits in pigs. We successfully constructed a vector containing porcine BMPR1B coding sequence (CDS) with the mutant G allele of A746G mutation. In total, we obtained 24 cloned male piglets using handmade cloning (HMC) technique, and 12 individuals survived till maturation. A set of polymerase chain reactions indicated that 11 of 12 matured boars were transgene-positive individuals, and that the transgenic vector was most likely disrupted during cloning. Of 11 positive pigs, one (No. 11) lost a part of the terminator region but had the intact promoter and the CDS regions. cDNA sequencing showed that the introduced allele (746G) was expressed in multiple tissues of transgene-positive offspring of No.11. Western blot analysis revealed that BMPR1B protein expression in multiple tissues of transgene-positive $F_1$ piglets was 0.5 to 2-fold higher than that in the transgene-negative siblings. The No. 11 boar showed normal litter size performance as normal pigs from the same breed. Transgene-positive $F_1$ boars produced by No. 11 had higher semen volume, sperm concentration and total sperm per ejaculate than the negative siblings, although the differences did not reached statistical significance. Transgene-positive $F_1$ sows had similar litter size performance to the negative siblings, and more data are needed to adequately assess the litter size performance. In conclusion, we obtained 24 cloned transgenic pigs with the modified porcine BMPR1B CDS using HMC. cDNA sequencing and western blot indicated that the exogenous BMPR1B CDS was successfully expressed in host pigs. The transgenic pigs showed normal litter size performance. However, no significant differences in litter size were found between transgene-positive and negative sows. Our study provides new insight into producing cloned transgenic livestock related to reproductive traits.
PURPOSE. This study investigated the influence of bone quality and surgical technique on the implant stability quotient (ISQ) value. In addition, the influence of interfacial bone quality, directly surrounding the implant fixture, on the resonance frequency of the structure was also evaluated by the finite element analysis. MATERIALS AND METHODS. Two different types of bone (type 1 and type 2) were extracted and trimmed from pig rib bone. In each type of bone, the same implants were installed in three different ways: (1) Compaction, (2) Self-tapping, and (3) Tapping. The ISQ value was measured and analyzed to evaluate the influence of bone quality and surgical technique on the implant primary stability. For finite element analysis, a three dimensional implant fixture-bone structure was designed and the fundamental resonance frequency of the structure was measured with three different density of interfacial bone surrounding the implant fixture. RESULTS. In each group, the ISQ values were higher in type 1 bone than those in type 2 bone. Among three different insertion methods, the Tapping group showed the lowest ISQ value in both type 1 and type 2 bones. In both bone types, the Compaction groups showed slightly higher mean ISQ values than the Self-tapping groups, but the differences were not statistically significant. Increased interfacial bone density raised the resonance frequency value in the finite element analysis. CONCLUSION. Both bone quality and surgical technique have influence on the implant primary stability, and resonance frequency has a positive relation with the density of implant fixture-surrounding bone.
Two cases of congenital hyperostosis at a pig farm were observed and examined pathologically in Landrace piglets. Twenty two piglets from 2 litters: 10 alive piglets in a litter and 2 stillborn and 10 alive piglets in another, were born with thickened forelimbs and some of them with thickened hindlimbs too. These piglets stowed symptoms of staggering and incoordination. Only one of these piglets could be reared normally and all the others died within 3 days of age. The thickened parts of their limbs were felt firm and not well pitted by finger pressing. An apparent ossification was identified on the central regions of the cross sections of the thickened limbs, and some pale, gray and ossiferous signs were found in the peripheral soft areas. On histopathological examination of the thickened limbs, it was found that the bone trabeculae were newly proliferated in a concentric form in central regions and in a radiated form in peripheral regions. The peripheral regions of the periosteum and perichondrium of new bone were proliferated with connective tissue and the edematous muscle bundles were atrophic and degenerative. Both the sows which produced piglets of congenital hyperostosis were mated with a different boar at next breeding and farrowed normal piglets. It was concluded that the swine congenital hyperostosis in the present cases was expressed by autosomal recessive gene of first mating boar.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.