• Journal of The Korean Society of Grassland and Forage Science
• /
• v.1 no.1
• /
• pp.18-28
• /
• 1978

To study about the effect of harvested stage and physical treatment such as wilting or chopping of plant material on the quality of silage, Italian ryegrass(Lolium multiflorum) harvested at pre-headed or heading stage and Seombadi(Dystaenia takesimana Nakai) harvested at pre-flowering stage, were used for the purpose. The materials were treated in four different ways which were a) non-treated, b) one day-wilted, c) chopped with 1 to 2cm length and d) wilted and chopped, and those were ensiled in plastic containers and stored at room temperature for three months. After three months of storage, it was investigated and obtained the following results. 1) Having 6.31 of NFE/CP ratio and low content of crude fiber, Seombadi contained more suitable constituents for silage than Italian ryegrass. 2) Under the non-treated or chopped condition, the loss of NFE was higher, and lower with wilted material. 3) Wilting or chopping improved DM digestibility. 4) Compared with Italian ryegrass harvested at pre-headed stage, the storage amount per unit volume of heading stage-Italian ryegrass and Seombadi were higher 8% and 69% respectively, and wilting and/or chopping increased the storage amount 41 to 134%. 5) The majority of weight loss during storage was observed at 1st week after ensiling, it continued slightly until 4th week. The highest loss in 8th week were 3.76% of nontreated material. 6) One day wilting increased DM content of silage 23 to 131%. Wilting and chopping increased pH and lactic acid improved the quality considerably. 7) The correlation between $NH_3$ and butyric acid, and between lactic acid and DM were r=0.782**, r=0.634** respectively. The regression equation were y=12.853X+4.908 (X=butyric acid), y=0.016X+1.309(X=DM content), respectively. 8. The above results indicate that it is necessary to wilt or chop material to make good quality silage from Italian ryegrass, and such treatment can improve the quality of silage with Seombadi also.

• Journal of Animal Environmental Science
• /
• v.13 no.1
• /
• pp.35-44
• /
• 2007

The effects of microbial feedstuff additives on feed conversion rate and physical and chemical characteristics of excreta in growing pigs were investigated. Three different products (A, B and C) were compared. Microbial population tests showed B contained higher numbers of total bacteria, Lactobacillus spp. and yeasts. The amylase activity of B was also higher than that of A and C. The daily feed intake rates fer control, A, B and C were 2.06, 2.13, 2.17 and 2.34 kg, respectively. Pigs feed product C had the highest liveweight gain(2.89 kg). However, the results of feed conversion rate were not significantly different between treatments. Amount of faces excreted for control, A, B and C was 1.18, 1,19, 1.23 and 1.32 kg, respectively. Urine volume for control, A, B, and C was 1.91, 1.80, 2.19 and 2.31 kg respectively. Moisture content, T-N, $P_2O_5$ and $K_2O$ in pig manure were not significantly different between treatments. The range of BOD values was 63,453 to $73,758mg/\ell$ for faeces, and 5,678 to $7,428mg/\ell$, for urine. SS values of solid and liquid excreta ranged from 142,200 to 176,000 and from 710 to $1,025mg/\ell$, respectively.

• Journal of Science and Technology Studies
• /
• v.8 no.1
• /
• pp.97-129
• /
• 2008

We are living in the time of high probability of technological risk due to increased rate of technology development and diffusion of new technologies. Resolving uncertainties, the basic attribution of risk, by accumulating knowledge over the risk factors of certain technology is critical to management of technological risk. In many cases of technological risks, high uncertainty of knowledge is commonly mentioned reason for public controversies on risk management. However, the type of technological risk with low social agreement and low uncertainty of knowledge, the main reason for public controversy is absence of social agreement. Public debates on the risks of mobile phones electromagnetic fields(EMF) to human health comes under this category. The knowledge uncertainty on human health effect of mobile phones EMF has been lowered increasingly by accumulating enormous volume of knowledge though scientists have not reached a final conclusion whether it pose a risk to the physical and mental health of the general population or not. In contrast with civil organizations calling for precautionary approach based regulation, the mobile phone industry is cling to the position of no-regulation-needed by arguing no clear evidence to prove health risks of mobile phone EMF has found. In Korea, government set exposure standards based on a measurement called the 'specific absorption rate'(SAR) and require the mobile phone industry to open SAR information to the public by their own decision. From the view of pro-regulation side based on precautionary approach, technology risk managament of mobile phones EMF in Korea is highly limited and formalized one with limited measuring of SAR on head part only and problematic self-regulated opening of information about SAR to the public. As far as the government keeps having priority on protecting interest of mobile phone industry over precautionary regulation of mobile phones EMF, the disagreement between civil organizations and the government will not resolved. The risk of mobile phones EMF to human health have high probability of being underestimated in the rate and damage of risk than objectively estimated ones due to familiarity of mobile phone technology. And this can be the cause of destructive social dispute or devastating disaster. To prevent such disastrous results, technology risk management, which integrating the goals of safety with economic growth in public policy and designing and promoting risk communication, is required.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.255-264
• /
• 2009

To evaluate the effects of chemical pretreatments of lignocellulosic biomass on enzymatic hydrolysis process, Populus euramericana was pretreated for 1 hr with 1% sulfuric acid ($H_2SO_4$) at $150^{\circ}C$ and 1% sodium hydroxide (NaOH) at $160^{\circ}C$, respectively. Before the enzymatic hydrolysis, each pretreated sample was subjected to drying process and thus finally divided into four subgroups; dried or non-dried acid pretreated samples and dried or non-dried alkali pretreated samples and chemical and physical properties of them were analyzed. Biomass degradation by acid pretreatment was determined to 6% higher compared to alkali pretreatment. By the action of acid ca. 24.5% of biomass was dissolved into solution, while alkali degraded ca. 18.6% of biomass. However, reverse results were observed in delignification rates, in which alkali pretreatment released 2% more lignin fragment from biomass to the solution than acid pretreatment. Unexpectedly, samples after both pretreatments were determined to somewhat higher crystallinity than untreated samples. This result may be explained by selective disrupture of amorphous region in cellulose during pretreatments, thus the cellulose crystallinity seems to be accumulated in the pretreated samples. SEM images revealed that pretreated samples showed relative rough and partly cracked surfaces due to the decomposition of components, but the image of acid pretreated samples which were dried was similar to that of the control. In pore size distribution, dried acid pretreated samples were similar to the control, while that in alkali pretreated samples was gradually increased as pore diameter increased. The pore volume which increased by acid pretreatment rapidly decreased by drying process. Alkali pretreatment was much more effective on enzymatic digestibility than acid pretreatment. The sample after alkali pretreatment was enzymatically hydrolyzed up to 45.8%, while only 26.9% of acid pretreated sample was digested at the same condition. The high digestibility of the sample was also influenced to the yields of monomeric sugars during enzymatic hydrolysis. In addition, drying process of pretreated samples affected detrimentally not only to digestibility but also to the yields of monomeric sugars.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.91-93
• /
• 2003

A comprehensive numerical study is carried out to investigate for the understanding of the flow evolution and flame development in a supersonic combustor with normal injection of ncumally injecting hydrogen in airsupersonic flows. The formulation treats the complete conservation equations of mass, momentum, energy, and species concentration for a multi-component chemically reacting system. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations and detailed chemistry of H2-Air is considered. It also accommodates a finite-rate chemical kinetics mechanism of hydrogen-air combustion GRI-Mech. 2.11[1], which consists of nine species and twenty-five reaction steps. Turbulence closure is achieved by means of a k-two-equation model (2). The governing equations are spatially discretized using a finite-volume approach, and temporally integrated by means of a second-order accurate implicit scheme (3-5).The supersonic combustor consists of a flat channel of 10 cm height and a fuel-injection slit of 0.1 cm width located at 10 cm downstream of the inlet. A cavity of 5 cm height and 20 cm width is installed at 15 cm downstream of the injection slit. A total of 936160 grids are used for the main-combustor flow passage, and 159161 grids for the cavity. The grids are clustered in the flow direction near the fuel injector and cavity, as well as in the vertical direction near the bottom wall. The no-slip and adiabatic conditions are assumed throughout the entire wall boundary. As a specific example, the inflow Mach number is assumed to be 3, and the temperature and pressure are 600 K and 0.1 MPa, respectively. Gaseous hydrogen at a temperature of 151.5 K is injected normal to the wall from a choked injector.A series of calculations were carried out by varying the fuel injection pressure from 0.5 to 1.5MPa. This amounts to changing the fuel mass flow rate or the overall equivalence ratio for different operating regimes. Figure 1 shows the instantaneous temperature fields in the supersonic combustor at four different conditions. The dark blue region represents the hot burned gases. At the fuel injection pressure of 0.5 MPa, the flame is stably anchored, but the flow field exhibits a high-amplitude oscillation. At the fuel injection pressure of 1.0 MPa, the Mach reflection occurs ahead of the injector. The interaction between the incoming air and the injection flow becomes much more complex, and the fuel/air mixing is strongly enhanced. The Mach reflection oscillates and results in a strong fluctuation in the combustor wall pressure. At the fuel injection pressure of 1.5MPa, the flow inside the combustor becomes nearly choked and the Mach reflection is displaced forward. The leading shock wave moves slowly toward the inlet, and eventually causes the combustor-upstart due to the thermal choking. The cavity appears to play a secondary role in driving the flow unsteadiness, in spite of its influence on the fuel/air mixing and flame evolution. Further investigation is necessary on this issue. The present study features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous works. In particular, the oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is not related to the cavity, but rather to the intrinsic unsteadiness in the flowfield, as also shown experimentally by Ben-Yakar et al. [6], The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The work appears to be the first of its kind in the numerical study of combustion oscillations in a supersonic combustor, although a similar phenomenon was previously reported experimentally. A more comprehensive discussion will be given in the final paper presented at the colloquium.

• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.219-228
• /
• 2012

The tangential breast intensity modulated radiotherapy (T-B IMRT) technique, which uses the same tangential fields as conventional 3-dimensional conformal radiotherapy (3D-CRT) plans with physical wedges, was analyzed in terms of the calculated dose distribution feature and dosimetric accuracy of beam delivery during treatment. T-B IMRT plans were prepared for 15 patients with breast cancer who were already treated with conventional 3D-CRT. The homogeneity of the dose distribution to the target volume was improved, and the dose delivered to the normal tissues and critical organs was reduced compared with that in 3D-CRT plans. Quality assurance (QA) plans with the appropriate phantoms were used to analyze the dosimetric accuracy of T-B IMRT. An ionization chamber placed at the hole of an acrylic cylindrical phantom was used for the point dose measurement, and the mean error from the calculated dose was $0.7{\pm}1.4%$. The accuracy of the dose distribution was verified with a 2D diode detector array, and the mean pass rate calculated from the gamma evaluation was $97.3{\pm}2.9%$. We confirmed the advantages of a T-B IMRT in the dose distribution and verified the dosimetric accuracy from the QA performance which should still be regarded as an important process even in the simple technique as T-B IMRT in order to maintain a good quality.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.3
• /
• pp.223-234
• /
• 2016

This study aimed to the adsorption-removal of high- radioactive iodide (I) contained in the initially generated high-radioactive seawater waste (HSW), with the use of AgX (Ag-impregnated X zeolite). Adsorption of I by AgX (hereafter denoted as AgX-I adsorption) was increased by increasing the Ag-impregnated concentration in AgX, and its concentration was suitable at about 30 wt%. Because of AgCl precipitation by chloride ions contained in seawater waste, the leaching yields of Ag from AgX (Ag-impregnated concentration : about 30~35 wt%) was less than those in distilled water (< 1 mg/L). AgX-I adsorption was above 99% in the initial iodide concentration ($C_i$) of 0.01~10 mg/L at m/V (ratio of weight of adsorbent to solution volume)=2.5 g/L. This shows that efficient removal of I is possible. AgX-I adsorption was found to be more effective in distilled water than in seawater waste, and the influence of solution temperature was insignificant. Ag-I adsorption was better described by a Freundlich isotherm rather than a Langmuir isotherm. AgX-I adsorption kinetics can be expressed by a pseudo-second order rate equation. The adsorption rate constants ($k_2$) decreased by increasing $C_i$, and conversely increased by increasing the ratio of m/V and the solution temperature. This time, the activation energy of AgX-I adsorption was about 6.3 kJ/mol. This suggests that AgX-I adsorption is dominated by physical adsorption with weaker bonds. The evaluation of thermodynamic parameters (a negative Gibbs free energy and a positive Enthalpy) indicates that AgX-I adsorption is a spontaneous reaction (forward reaction), and an endothermic reaction indicating that higher temperatures are favored.

• Journal of Animal Environmental Science
• /
• v.13 no.3
• /
• pp.153-160
• /
• 2007

Study for the effect of three different microbial feed additives(henceforth MA-A, MA-B, and MA-C) on feed coversion rate, and physical and chemical characteristics of swine finisher was conducted. MA-B had higher number of Lactobacillus spp. and yeast, compared to any other. The amylase activity of MA-B was also higher than any other. The daily feed intake rates of pigs fed control, MA-A, MA-B and MA-C were 3.15, 3.14, 3.31 and 3.42 kg, respectively. MA-C had the highest weight gain. However, there was no significant difference between treatments. The weights of feces daily excreted by pigs fed control, MA-A, MA-B, and MA-C were 2.14, 2.02, 2.18, and 2.23 kg/day, respectively. The volume of urine daily excreted by pigs fed control, MA-A, MA-B, and MA-C were 3.14, 3.26, 3.27, and $3.41\;{\ell}/day$, respectively. Water content, T-N, $P_{2}O_{5}$, and $K_{2}O$ in swine manure were not significantly different between treatments. The BOD were between 42,576 and $67,450\;mg/{\ell}$ for feces and were between 5,882.5 and $8,657.5\;mg/{\ell}$ for urine, respectively. The SS were between 138,000 and $180,000\;mg/{\ell}$ for feces and were between 875.0 and $1450.0mg/{\ell}$ for urine, respectively.

• Food Science and Preservation
• /
• v.19 no.6
• /
• pp.858-865
• /
• 2012

In this research, the soaking and steaming conditions of Korean wheat meju according to the degree of milling were investigated, and the quality characteristic was analyzed, for the manufacture of the standardized Korean wheat meju. As a result of the changes in weight, volume, moisture content, and moisture absorption amount, which indicate the physical properties of Korean wheat meju using 20% polished wheat, 50% polished wheat, whole wheat, and whole wheat flour, most of the wheat materials reached the equilibrium state after 4 hours of soaking. Also, the appropriate steaming time to complete the cooking of the wheat materials was found to be 10 min at $100^{\circ}C$, except for whole wheat. The 20 and 50% polished wheat materials were selected for Korean wheat meju based on the soaking and steaming results. The selected wheat materials were fermented using Aspergillus oryzae and Bacillus subtilis M1, respectively, and the quality properties and enzyme activities showed that A. oryzae would be effective for the manufacture of Korean wheat meju. Also, the 50% polished wheat showed higher total sugar content, reducing sugar content, and ${\alpha}$-amylase activity than the 20% polished wheat. Therefore, it is supposed that the fermentation of 50% polished wheat by A. oryzae would be appropriate for manufacturing superior Korean wheat meju.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.78-99
• /
• 2020

The Buddha triad and 16 Arhat statues carved on the rock surface at Seongbulsa temple is the only domestic remaining example of all 16 Arhats, so its academic value is very high. However, it is severely damaged and so required a stability evaluation through study of digital documentation and precise diagnosis for the purpose of comprehensive conservation. This process established that the Buddha statues were of similar scale, while the Arhats showed a wide variety of sizes, and the two kith and kin in the volume were larger than the Arhats. It was estimated that the statues of food for Buddha are similar to the Arhat statues, and most of the statues are well-formed. The rock used to carve the Buddha statues is banded gneiss with distinct foliation, alternating between white bands of quartz and feldspar and black bands composed of biotite. The Buddha statues have been damaged by physical weathering, discoloration, and biological contamination. In damage evaluations, joint (3.6 crack index), peeling (5.2%), exfoliation (1.7%), and falling off (0.1%) were observed on the rock surface of the Buddha statues. In particular, due to severe biological weathering, stage 9 and 10 biological coverage of the rock surface accounted for 57.5% of the total area, and stages 5 to 8 also accounted for a high share at 22.3%. The discoloration factors were shown to be dark brown and white with Fe, Ca, and S, and a large amount of C detected in the blackened contaminants, and the damage weight high in all areas. Discontinuities in different directions were identified in the rock surface. Analysis of potential rock failure types indicated that there is a possibility of plane and toppling failure, but wedge failure is unlikely to occur. The mean ultrasonic velocity of the main rock surface was 2,463m/sec, the lower part of the left side with a large number of joints was relatively low, and the highly weathered (HW) type to the completely weathered (CW) type concentrated distribution, showing weak properties. For the Buddha statues, conservation treatment is required for about 14.9% of micro cracks and 58.9% of exfoliation cracks. In addition, in order to improve the conservation environment of the Buddha statues, maintenance of drainage and ground preparations for the rock surface gradient and plants are necessary, and protection facilities should be reviewed for long-term conservation and management purposes.