• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.4
• /
• pp.477-482
• /
• 1998

In the aquaculture industry, a photobioreactor (Pbr) with high productivity is a prerequisite for mass production of Chlorella sp., a feeding fry for Rotifer (Brachinous plicatilis). To enhance the productivity of Chlorella sp., model Pbrs such as Cylinder type, Spherical surface type, Half-spherical surface type, Plate type, Raceway pond type and Water-wheel type Pbr with different values of surface area exposed to light/culture volume (S/V) were manufactured, and the maximum specific growth rate (${\mu}_{max}$) and productivity of Chlorella vulgaris 211-11b at $25^{\circ}C$, pH 7.0 and 12,000 lux were compared each other. The ${\mu}_{max}$ and productivity were not proportional to S/V. Among the 6 model Pbrs, Half-spherical surface type Pbr showed the highest ${\mu}_{max}$ and productivity as 2.206 ($day^{-1}$) and 0.247($g^{{\ell}-1}day^{-1}$).

• Journal of Microbiology
• /
• v.42 no.4
• /
• pp.305-314
• /
• 2004

An exopolysaccharide-producing microalgal dinoflagellate was isolated from a red-tide bloom and des­ignated strain KG03. A bacteria-free culture of strain KG03 was achieved using a modified wash with phototaxis and antibiotic treatment. Combined treatment with neomycin and cephalosporin was the most effective for eliminating the bacteria associated with the microalgae. Strain KG03 was identified as Gyrodinium impudicum by analyzing the ITS regions of the 5.8S rDNA, 18S rDNA, morphological phenotype and fatty acid composition. The exopolysaccharide production and cell growth in a 300-ml photobioreactor were increased 2.7- and 2.4-fold, respectively, compared with that in a flask culture at the first isolation step.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.3
• /
• pp.186-190
• /
• 2000

It has been reported that flashing light enhances microalgal biomass productivity and overall photosynthetic efficiency. The algal growth kinetics and oxygen production rates under flashing light with various flashing frequencies (5Hz-37 kHz) were compared with those under equivalent continuous light in photobioreactors. A positive flashing light effect was observed with flashing frequencies over 1kHz. The oxygen production rate under conditions of flashing light was slightly higher than that under continuius ligth. The cells under the hight, particularly at higher cell concentrations. When 37kHz flashing light was applied to an LED-based photobioreactor, the concentration was higher than that obtained under continuous light by about 20%. Flashing light may be a reasonable solution to overcome mutual shading, particularly in high-density algal cultures.

• Journal of Biosystems Engineering
• /
• v.24 no.1
• /
• pp.9-18
• /
• 1999

This study was performed to investigate the optimum microalgal culture conditions using flask culture and to find the feasibility of using the flue gas of the rice husk incinerator for cultivating the microalgae. The optimum initial pH of media was 4.5 for the microalgae culture, and the intermittently illuminated culture was more effective than the continuous illuminated culture. Thus, the balance between photosynthesis and formative metabolism must be considered thoroughly to cultivate microalgal cells. The optimum CO2 concentrations were in the range of 7 to 10%, and the optimum temperature was about 35$^{\circ}C$ in both the daytime and the nighttime for the culture. When flue gas of the rice husk incinerator was applied to the microalgae culture using stirred photobioreactor, the dry cell weight was 0.026 g dry biomass/hr$.$l. The results obtained in experiments indicated that the flue gas was effective for microalgae culture without any limitations.

• Journal of Korean Society on Water Environment
• /
• v.31 no.2
• /
• pp.134-141
• /
• 2015

The focus of this study was to observe the growth of Chlorella vulgaris and Botryococcus braunii under mixotrophic conditions (i.e., added acorn) with the aim of increasing biomass and triacylglycerols (TAGs) content. The result of investigation indicated that the acorn contains a lot of carbonate (87.29%) and glucose (97.99 mg%). A significant growth of biomass was obtained when grown in acorn rich environment comparing to autotrophic conditions. 3 g/L acorn yielded the highest biomass concentration for these strains. Thus, the biomass productivity with 3 g/L acorn was obtained 2.31 times and 2.10 times higher than that of authotrophic conditions for Chlorella vulgaris and Botryococcus braunii, respectively. The maximum amount of TAGs was reached 14.35% and 18.41% for Chlorella vulgaris and Botryococcus braunii, respectively, in the growth medium with 5 g/L acorn. The effect of acorn could enhance the investigated microalgae growth, biomass productivity and TAGs content. This provides a feasible way to reduce the cost of bioenergy production from microalgae.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.6
• /
• pp.1098-1102
• /
• 2016

A green microalga, Tetraselmis sp., was cultivated in the coastal seawater of Young-Heung Island using semi-permeable membrane photobioreactors (SPM-PBRs) in different seasons. The microalgae in the SPM-PBRs were able to grow on nutrients diffused into the PBRs from the surrounding seawater through SPMs. The biomass productivity varied depending on the ion permeabilities of the SPMs and environmental conditions, whereas the quality and quantity of fatty acids were constant. The temperature of seawater had a greater influence than solar radiation did on productivity of Tetraselmis sp. in SPM-PBRs. SPM-PBRs could provide technologies for concurrent algal biomass and fatty acids production, and eutrophication reduction in the ocean.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.05a
• /
• pp.314-315
• /
• 2023

도시 나무는 환경적, 경제적, 사회적 혜택에 크게 기여하기 때문에 그 필요성이 널리 인식되어 왔다. 그러나 도시화와 도시 개발로 인해 녹지 공간이 부족해지면서 충분한 나무가 자라지 못하고 있다. 따라서 도시 녹지를 제공하기 위한 대안이 제시되고 있다. 그러한 방법 중 하나는 가로수를 대체할 수 있는 미세조류를 배양하기 위해 광생물반응기를 사용하는 것이다. 세르비아 국립대학교는 이를 위해 LIQUID 3 기술을 사용하여 새로운 광생물반응기 구조를 개발했다. 본 논문에서는 이 기술에 대한 연구와 국내 적용 가능성을 논의한다.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.3
• /
• pp.214-220
• /
• 2014

The aim of this study is to optimize the efficiency of a photobiorector on the growth rate of Chlorella vulgaris (C. vulgaris) by varying distance of optical panel (OP). The round shaped C. vulgaris (FC-16) having the size of $3-8{\mu}m$ is employed in this study. The cells of C. vulgaris are cultured in the Jaworski's Medium with deionized water at $22^{\circ}C$ for 15 days. The OP is placed at four different distances i.e., at 225 mm distance (Run 1), 150 mm distance (Run 2), 112.5 mm distance (Run 3) and 90 mm distance (Run 4) having a LED (Light Emitting Diode) source. The diffuse rate is achieved to 86%, 90%, 92% and 94% for Run 1, Run 2 Run 3 and Run 4, respectively. A narrower distance of OP caused to effectively to increase the efficiency of diffuse light rate. For mass cultivation of this biomass, medium is changed according to distance of OP after attaining a maximum biomass concentration; Run 1 in 8 days, Run 2 in 6 days, Run 3 in 4 days and Run 4 in 3 days. In addition, the amount of maximum biomass rate for Run 4 was reached 3 times higher than that of Run1. However, growth rate, chlorophyll per cell, cell volume and doubling time are found to be Run 3 and Run 4 higher than that of Run 1 and Run 2 samples. However, Run 3 and Run 4 are having a slight difference in all these measurements. These findings suggest that in terms of economic consideration and efficiency towards simultaneous mass cultivation of biomass, Run 3 was found to be more effective than other samples.

• KSBB Journal
• /
• v.19 no.4
• /
• pp.257-262
• /
• 2004

Recently, there is a growing interest in microalgae and the use of microalgae focused on the production of various high value metabolite used in food, pharmaceuticals and cosmetics. The key limiting factor in high density algal cultivation is the light and algal growth is defined by light intensity and light penetration depth into the culture medium. The effect of light with various light paths, S/V ratios, light intensities, and 50% duty cycle on the growth of microalgae was examined to enhance microalgal biomass productivity and photosynthetic efficiency. We confirmed that the utilization of efficient light energy was obtained from 4 cm of diameter, 57.6% of S/V ratio, 62 ${\mu}$mol/㎡/s of light intensity.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.1
• /
• pp.21-28
• /
• 2014

Recently, several researchers made their endeavor to manufacture the photobioreactor(PBR) with characteristic shapes form vacuum and blow forming process. Hence, behaviors of the transparent polycarbonate(PC) plate in the high temperature region should be examined to obtain the desired PBR case via vacuum and blow forming processes. The aim of this paper is to investigate tensile behavior of PC plate in the high temperature. Various tensile tests were performed using high temperature tensile testing machine. The influence of tensile speed, thickness and ambient temperature on tensile behavior in the high temperature was examined. The flow stress and tensile strength augmented when the tensile speed increased. In order to obtain proper flow curves with strain rate effects for different temperature of specimen, G'sell-Jonas model was adopted. The material constants of the G'sell-Jonas model were estimated. The flow curves of the PC plate considering the tensile speed, specimen thickness and temperature were obtained.