• Journal of Korea Foundry Society
• /
• v.7 no.3
• /
• pp.184-191
• /
• 1987

In this study the principles of melting phenomena of compacted vermicular graphite cast iron are discussed by considering the effects of the variation of phosphorus content and heating rate on the quenched microstructure of the specimens. In compacted vermicular graphite cast iron containing little phosphorus, the melting phenomena are found initially at the outer region of austenite shell and subsequently progressed with the diffusion of carbon through the austenite shell without regard to heating rate. But as the phosphorus content was increased over than 0.12wt.%, the melting phenomena initiated at the boundary of eutectic shell and progressed along the contact area between the melt and graphite tips at higher heating rate. At lower heating rate, the melt of steadite dissolved at the lower temperature than that of eutectic was moved toward the graphite through the austenite grain-boundary and promoted melting of graphite and matrix.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.6
• /
• pp.17-26
• /
• 1984

A computer program (DIFSIM: Diffusion SIMulator) was written to calculate the impurity profile, specifically boron and phosphorus, due to three different diffusion processes-predeposition, drive-in in inert ambient, and drive-in in oxidizing ambient. The vacancy mechanism including Fair and Tsai's theory for phosphDrus diffusion was widely incorporated for modeling various diffusion processes. The concentrationtependent oxidation rate was also explained using the vacancy model, while the oxidation - enhanced diffusion was mo dolled using catkins replacement mochanlsm . The simulation results using DIFSIM showed a fairly good agreement with the experimental data by adjusting some of the empirical parameters in the program. The results obtained using DIFSIM were compared with the results from SUPREM II.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.145-146
• /
• 2006

The most Important research topic in the development of ZnO LED and LD is the production of p-type ZnO thin film that has minimal stress with outstanding stoichiometric ratio. In this study, Phosphorus diffused into the undoped ZnO thin films using the ampoule-tube method for the production of p-type znO thin films. The undoped ZnO thin films were deposited by RF magnetron sputtering system on $GaAs_{0.6}P_{0.4}$/GaP and Si wafers. 4N Phosphorus (P) was diffused into the undoped ZnO thin films in ampoule-tube which was performed and $630^{\circ}C$ during 3hr. We found the diffusion condition of the conductive ZnO films which had p-type properties with the highest mobility of above 532 $cm^2$/Vs compared with other studies PL spectra measured at 10K for the purpose of analyzing optical properties of p-type ZnO thin film showed strong PL intensity in the UV emission band around 365nm ~ 415nm and 365nm ~ 385nm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.17-18
• /
• 2006

고상 확산 방법을 이용하여 얕은 소스/드레인 접합을 가지는 SOI (Silicon-On-Insulator) MOSFET 소자를 제작하였다. 확산원으로는 PSG(Phosphorus silicate glass) 박막과 PBF(Poly Boron Film) 박막이 각각 n, p-type 소자 형성을 위해 사용되었다. 얕은 접합 형성을 위하여 급속 열처리 방법(RTA: Rapid Thermal Annealing)을 이용하여 PSG와 PBF로부터 인과 붕소를 SOI MOSFET 소자의 소스/드레인으로 확산시켰다. 또한, 소자 특성 개선을 위한 후 속 열처리 공정으로 희석된 수소 분위기 중에서 FA(Furnace Annealing)를 실시하였다. SPD 기술을 적용하여 10 nm 이하의 매우 얕은 p-n 접합을 형성할 수 있었고, 양호한 다이오드 특성을 얻을 수 있었다. 또한, SPD 방법으로 결함이 없는 접합 형성이 가능하며, 소자 제작 공정의 최적화를 통해 차세대 CMOS 소자로 기대되는 SOI MOSFET를 성공적으로 제작할 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.30 no.1
• /
• pp.55-61
• /
• 1993

In the WSi2/CVD-Si/SiO2 polycide structure, electrode resistance and its property were studied as a function of deposition temperature and thickness of CVD-Si, diffusion condition of POCl3, and WSi2 being deposited or not. Resistivity of poly-Si is decreased with increment of thickness in the case of POCl3 diffusion of low sheet resistance, but it is increased in the case of high sheet resistance. The resistivity of amorphous-Si is generally lower than that of poly-Si. Initial sheet resistance of poly-Si/WSi2 gate electrode is affected by the thickness and resistance of poly-Si layer, but final resistance after anneal, 900$^{\circ}C$/30min/N2, is only determined by WSi2 layer. Flourine diffuses into SiO2, but tungsten does not. In spite of out-diffusion of phosphorus into WSi2 layer, the sheet resistance is not changed.

• Journal of Environmental Science International
• /
• v.30 no.3
• /
• pp.195-206
• /
• 2021

Contaminated marine sediment is a secondary pollution source in the coastal areas, which can result in increased nutrients concentrations in the overlying water. We analyzed the nutrients release characteristics into overlying water from sediments and the interaction among benthic circulation of nitrogen, phosphorus, iron, and sulfur were investigated in a preset sediment/water column. Profiles of pH, ORP, sulfur, iron, nitrogen, phosphorus pools were determined in the sediment and three different layers of overlying water. Variety types of sulfur in the sediments plays a significant role on nutrients transfer into overlying water. Dissimilatory nitrate reduction and various sulfur species interaction are predominantly embodied by the enhancing effects of sulfide on nitrogen reduction. Contaminant sediment take on high organic matter, which is decomposed by bacteria, as a result promote bacterial sulfate reduction and generate sulfide in the sediment. The sulfur and iron interactions had also influence on phosphorus cycling and released from sediment into overlying water may ensue over the dissolution of ferric iron intercede by iron-reducing bacteria. The nutrients release rate was calculated followed by release rate equation. The results showed that the sediments released large-scale quantity of ammonium nitrogen and phosphate, which are main inner source of overlying water pollution. A mechanical migration of key nutrients such as ammonia and inorganic phosphate was depicted numerically with Fick's diffusion law, which showed a fair agreement to most of the experimental data.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.141-142
• /
• 2005

To investigate the ZnO thin films which is interested in the next generation of short wavelength LEDs and Lasers, our ZnO thin films were deposited by RF sputtering system. At sputtering process of ZnO thin films, substrate temperature, work pressure respectively is $300^{\circ}C$ and 5.2 mTorr, and the purity of target is ZnO 5N. The thickness of ZnO thin films was about $1.9{\mu}m$ at SEM analysis after sputtering process. Phosphorus (P) and arsenic (As) were diffused into ZnO thin films sputtered by RF magnetron sputtering system in ampoule tube which was below $5\times10^{-7}$ Torr. The dopant sources of phosphorus and arsenic were $Zn_3P_2$ and $ZnAs_2$. Those diffusion was perform at 500, 600, and $700^{\circ}C$ during 3hr. We find the condition of p-type ZnO whose diffusion condition is $700^{\circ}C$, 3hr. Our p-type ZnO thin film has not only very high carrier concentration of above $10^{19}/cm^3$ but also low resistivity of $5\times10^{-3}{\Omega}cm$.

• ETRI Journal
• /
• v.25 no.4
• /
• pp.247-252
• /
• 2003

This paper presents results from experiments on laser-annealed SiGe-selective epitaxial growth (LA-SiGe-SEG). The SiGe-SEG technology is attractive for devices that require a low band gap and high mobility. However, it is difficult to make such devices because the SiGe and the highly doped region in the SiGe layer limit the thermal budget. This results in leakage and transient enhanced diffusion. To solve these problems, we grew in situ doped SiGe SEG film and annealed it on an XMR5121 high power XeCl excimer laser system. We successfully demonstrated this LA-SiGe-SEG technique with highly doped Ge and an ultra shallow junction on p-type Si (100). Analyzing the doping profiles of phosphorus, Ge compositions, surface morphology, and electric characteristics, we confirmed that the LA-SiGe-SEG technology is suitable for fabricating high-speed, low-power devices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.69-69
• /
• 1999

고집적 DRAM 소자의 캐패시터 제조 공정에 있어 하부 전극을 고농도로 도핑을 하기 위한 방안의 일환으로 고체 P를 이용한 two-zone 확산법으로 다결정 실리콘에 도핑하는 방법을 채택하고 가능성을 검토하였다. 기존의 도핑방법과는 달리 불필요한 산화막을 형성하지 않고 굴곡진 표면을 따라 균일하게 고농도로 도핑할 수 있는 장점이 있다. 본 실험에서는 단결정 실리콘 및 다결정 실리콘에 대해 온도와 시간을 달리하여 P를 도핑하고, SIMS 분석으로 실험 조건에 따른 표면 농도를 분석하였다. 또한 도핑 온도를 달리하여, PH3를 이용하여 도핑한 경우와 비교 분석하였다. 표면 부근의 고농도 도핑을 위해서는 도핑온도를 저온으로 가져가고 도핑시간을 길게 가져가는 것이 유리하고, 고체 P를 사용한 경우에 있어서 PH3에 비해 표면 부근의 농도가 약 10배 정도 고농도로 도핑된 것을 알 수 있었다. 실제 소자에서의 적용 가능성을 보기 위하여, 캐패시터를 제작하여 전기적 특성을 분석하였다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.6
• /
• pp.37-45
• /
• 1998

In this paper, we report the first three-dimensional simulation result of the transient enhanced diffusion(TED) of dopants in the ion-implanted silicon by employing our 3D semiconductor process simulator, INPROS system. In order to simulate three-dimensional TED redistribution of dopants in silicon, the dopant distributions after the ion implantation was calculated by Monte Carlo(MC) method, followed by finite element(FE) numerical solver for thermal annealing. Excellent agreement between the simulated 3D profile and the SIMS data has been obtained for ion-implanted arsenic and phosphorus after annealing the boron marker layer at 75$0^{\circ}C$ for 2 hours. Our three-dimensional TED simulation could successfully explain the reverse short channel effect(RSCE) by taking the 3D point defect distribution into account. A coupled TED simulation and device simulation allows reverse short channel effect on threshold to be accurately predicted.