• 한국ITS학회 논문지
• /
• 제6권2호
• /
• pp.126-137
• /
• 2007

본 논문에서는 새로운 ROM 압축방식을 사용한 저전력 직접 디지털 주파수 합성기를 제안하고 낮은 클럭에서 동작하는 위상 누적기를 병렬로 연결하여 높은 주파수를 생성하는 위상-사인 변환기를 설계한다. ROM크기를 줄이기 위해 사인파를 양자화 할 때 일련의 차동 양자화 기술을 응용, 변형하여 양자화 ROM(Quantized ROM : Q-ROM과 차동 ROM(Differential ROM : D-ROM)을 사용하는 QD-ROM 압축방식을 제안한다. 이를 사용함으로써 67.5%의 ROM 사이즈를 감소시킬 수 있고 ROM의 크기를 줄여 전력 소모를 줄일 수 있다.

• 대한전기학회논문지
• /
• 제35권12호
• /
• pp.541-554
• /
• 1986

This paper presents the results of driving performance analysis of permanent magnet synchronous motor using a microprocessor based control system. The system consists of three phase power transistor inverters, three phase controlled rectifier, three central processing units, and sensors. The three CPUs are, respectively, used to generate PWM control signals for the inverter generating three phase sine wave, to generate the gate control signals for firing the converter, and to supervise other two CPUs. The supervisor is used to compute PI control algtorithm to three phase reference sine wave for the inverter. It is also used to maintain a constant voltage frequency ratio for the converter operating as a constant torque controller. The inverter CPU retrieves precomputed PWM patterns from look up tables because of computation speed limitations found in almost available microprocessors. The converter CPU also retrieves precomputed gate control patterns from another look-up tables. For protecting the control ststem from any damage by extraordinary over currents, the supervisor receives the data from current sensor, CT, and break down the CB to isolate the circuits from source. A resolver has a good performance characteristics of overall speed range, especially on low speed range. Therefor the speed control accuracy is impoved. The microprocessor based PM synchronous motor control system, thus, has many advantages such as constant torque characteristics, improvement of wave, limitation on extraordinary over currents, improvement of speed control accuracy, and fast response speed control using multi-CPU and look-up tables.

• 한국통신학회논문지
• /
• 제41권10호
• /
• pp.1179-1182
• /
• 2016

본 논문에서는 sine-linear phase difference 방식과 DPCM 방식의 차동 양자화 기술을 응용하여 새로운 ROM 압축방식을 제안하고 이를 이용하여 저전력 직접 디지털 주파수 합성기를 FPGA를 사용하여 설계 및 제작한다. ROM 크기를 줄이기 위해 사인파의 1/4 주기를 $2^N$간격으로 표본화하여 양자화된 값을 양자화 ROM1에 저장하고 각 표본화 사이를 $2^K$간격으로 표본화하고 ROM1에 저장된 표본화 값의 차이를 ROM2에 저장하여 ROM의 크기를 줄이는 방식을 사용한다. 이를 사용함으로써 기존 방식 대비 약 37%의 ROM 크기만 필요하게 되여 전력 소모를 줄일 수 있다.

• 전기전자학회논문지
• /
• 제12권4호
• /
• pp.239-245
• /
• 2008

In this paper, a dc-dc power converter scheme with the FPGA based technology is proposed to apply for solar power system which has many features such as the good waveform, high efficiency, low switching losses, and low acoustic noises. The circuit configuration is designed by the conventional control type converter circuit using the isolated dc power supply. This new scheme can be more widely used for industrial power conversion system and many other purposes. Also, I proposed an efficient photovoltaic power interface circuit incorporated with a FPGA based DC-DC converter and a sine-pwm control method full-bridge inverter. The FPGA based DC-DC converter operates at high switching frequency to make the output current a sine wave, whereas the full-bridge inverter operates at low switching frequency which is determined by the ac frequency. As a result, we can get a 1.72% low THD in present state using linear control method. Moreover, we can use stepping control method, we can obtain the switching losses by Sp measured as 0.53W. This paper presents the design of a single-phase photovoltaic inverter model and the simulation of its performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.867-869
• /
• 1993

In generally Boost Converter is used for Fuel Cell System. Because the output voltage of fuel cell is too small and greatly depends on the load condition, Boost Converter are required to boost and regulate the Fuel Cell voltage for per conversion efficiency. In this Paper, 6-phase Boost Converter is used to boost the Fuel Cell Voltage and regulate the output voltage. Multi phase converter hag some advantages such as low ripple and filter sine. About the Peak Current Control and compare of the Ripple Current of Boost Converter, we have studied.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.125-128
• /
• 2006

This paper presents a novel type soft switching PWM power frequency AC-AC converter using bidirectional active switches or single phase utility frequency AC-high frequency AC matrix converter. This converter can directly convert utility frequency AC (UFAC, 50Hz/60Hz) power to high frequency AC (HFAC) power ranging more than 20kHz up to 100kHz. A novel soft switching PWM prototype of high frequency multi-resonant PWM controlled UFAC-HFAC matrix converter using antiparallel one-chip reverse blocking IGBTs manufactured by IXYS corp. is based on the soft switching resonance with asymmetrical duty cycle PWM strategy. This single phase UFAC-HFAC matrix converter has some remarkable features as electrolytic capacitor DC busline linkless topology, unity power factor correction and sine-wave line current shaping, simple configuration with minimum circuit components, high efficiency and downsizing. This series load resonant UFAC-HFAC matrix converter, incorporating bidirectional active power switches is developed and implemented for high efficiency consumer induction heated food cooking appliances in home uses and business-uses. Its operating performances as soft switching operating ranges and high frequency effective power regulation characteristics are illustrated and discussed on the basis of simulation and experimental results.

• 융합신호처리학회논문지
• /
• 제12권4호
• /
• pp.291-297
• /
• 2011

본 논문에서는 DPCM 방식의 차동 양자화 기술 및 병렬 기법을 응용하여 새로운 ROM 압축방식을 사용한 고속의 저 전력 직접디지털 주파수 합성기를 제안하고 FPGA를 사용하여 설계 및 제작한다. ROM 크기를 줄이기 위해 사인파를 표본화하여 양자화된 값을 양자화 ROM(Quantized ROM : Q-ROM)에 저장하고 각 표본화 사이클 차동 양자화하여 차동 ROM(Differential ROM : D-ROM)에 저장한다. 또한 낮은 클럭에서 동작하는 위상 누적기를 병렬로 2개 연결하여 높은 주파수를 생성하는 위상-사인 변환기를 설계 및 제작한다. 이를 사용함으로써 67.5%의 ROM 사이즈를 감소시킬 수 있고 ROM의 크기를 줄여 전력 소모를 줄일 수 있을 뿐만 아니라 고속의 직접 디지털 주파수 합성기를 설계 및 제작할 수 있다.

• 전력전자학회논문지
• /
• 제14권1호
• /
• pp.72-81
• /
• 2009

본 논문에서는 대기압 플라즈마 발생용 정현파펄스형 교류 전원 장치에 대한 연구를 진행하였다. 정현파펄스형 전원장치는 기존의 LC공진을 이용한 교류 전원장치보다 높은 dv/dt를 갖게 되므로 안정적인 플라즈마 공급이 가능하며 펄스형에 비해 고조파 노이즈가 적고, 정전류 턴온-영전압 턴오프 형태로 동작하므로 매우 높은 효율을 갖는다. 또한 플라즈마 점화 기능을 강화하고 안정적인 전압제어를 위해 3상 부스트형 컨버터를 입력단에 사용하여 입력 역률이 매우 높은 시스템을 구성할 수 있다. 실험실 수준의 10kW부하시설을 사용하여 본 연구의 결과를 입증하였다.

• 전기학회논문지
• /
• 제58권5호
• /
• pp.976-981
• /
• 2009

This paper proposed optimal design and microcontroller driver for driving the thin-type ultrasonic motor. To find the optimal size of the stator, motions of the motor were simulated using ATILA by changing length, width and thickness of the ceramics. Two sinusoidal waves which have 90 degree phase difference were needed for driving the thin-type motor. The thin-type ultrasonic motor driver was composed of microcontroller(Atmega128), push-pull inverter, encoder and AD-converter. Microcontroller generates four square waves which have variable frequency and 25[%] duty ratio in $20{\sim}150$[kHz]. The output signals of microcontroller were converted to sine wave and cosine wave by push-pull inverter and were applied to the thin-type ultrasonic motor. The encoder and AD-converter were used for maintaining speed of the thin-type ultrasonic motor. The AD-converter controlled DC voltage of inverter in accordance with output signal of encoder. Using the driver, characteristics of the motor as speed and torque were measured.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.939-950
• /
• 2015

A single-stage AC-AC converter has been designed for a wind energy conversion system (WECS) that eliminates multistage operation and DC-link filter elements, thus resolving size, weight, and reliability issues. A simple switching strategy is used to control the switches that changes the variable-frequency AC output of an electrical generator to a constant-frequency supply to feed into a distributed electrical load/grid. In addition, a modified random sinusoidal pulse width modulation (RSPWM) technique has been developed for the designed converter to make the overall system more efficient by increasing generating power capacity and reducing the effects of inter-harmonics and sub-harmonics generated in the WECS. The technique uses carrier and reference waves of variable switching frequency to calculate the firing angles of the switches of the converter so that the three-phase output voltage of the converter is very close to a sine wave with reduced THD. A comparison of the performance of the proposed RSPWM technique with the conventional SPWM demonstrated that the power generated by a turbine in the proposed approximately increased by 5% to 10% and THD reduces by 40% both in voltage and current with respect to conventional SPWM.