• ETRI Journal
• /
• v.29 no.6
• /
• pp.707-715
• /
• 2007

In-phase/quadrature (I/Q) imbalances, which are generated by non-ideal transceiver components, are inevitable physical phenomena that cause the performance of practical communication systems to be degraded. In this paper, we provide a new closed-form expression for the bit error rate of hierarchical M-ary phase shift keying with I/Q phase and amplitude imbalances and analyze the effect of I/Q imbalances on BER performance over an additive white Gaussian noise channel.

• Journal of Drive and Control
• /
• v.19 no.2
• /
• pp.17-26
• /
• 2022

Recently, automatic transmissions caused a good improvement in the shift quality of a forklift. An advanced shift control algorithm, which was based on TCU firmware, was applied with embedded control technology and microcontrollers. In the clutch-to-clutch shifting, one friction element is released and the other friction element is activated. During this process, if the release and application timings are not synchronized, an overrun or tie-up occurs and ultimately leads to a shift shock. The TCU, which measures only the speed of the forklift, inevitably applies the open-loop shift control. In this situation, the speed ratio does not change during the clutch fill. The torque phase occurs until the clutch is disengaged. In this study, an offline shift logic of the learning control was proposed. It induced a synchronous shift when the learning control progressed. During this process, the reference current trajectory of the release clutch was corrected and applied to the next upshift. We considered the results of the overrun/tie-up characteristics of the upshift performed immediately before. The vehicle test proved that the deviation in shift quality, which was caused by the difference in the mechanical characteristics of the clutch, could be improved by the learning control.

• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.248-255
• /
• 2006

Most optical security systems use a 4-f correlator, Mach-Zehnder interferometer, or a joint transform correlator(JTC). Of them, the JTC does not require an accurate optical alignment and has a good potential for real-time processing. In this paper, we propose an image encryption system using a position shift property of the JTC in the Fourier domain and a random phase image. Our encryption system uses two keys: one key is a random phase mask and the other key is a position shift factor. By using two keys, the proposed method can increase the security level of the encryption system. An encrypted image is produced by the Fourier transform for the multiplication image, which resulted from adding position shift functions to an original image, with a random phase mask. The random phase mask and position shift value are used as keys in decryption, simultaneously. For the decryption, both the encrypted image and the key image should be correctly located on the JTC. If the incorrect position shift value or the incorrect key image is used in decryption, the original information can not be obtained. To demonstrate the efficiency of the proposed system, computer simulation is performed. By analyzing the simulation results in the case of blocking of the encrypted image and affecting of the phase noise, we confirmed that the proposed method has a good tolerance to data loss. These results show that our system is very useful for the optical certification system.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.3
• /
• pp.93-100
• /
• 2008

Laser interferometry is widely used as a measuring system in many fields because of its high resolution and ability to measure a broad area in real-time all at once. In conventional LASER interferometry, for example Out-of-plane ESPI(Electronic Speckle Pattern Interferometry), In plane ESPI, Shearography and Holography, it uses PZT or other components as a phase shift instrumentation to extract 3D deformation data, vibration mode and others. However, in most cases PZT has some disadvantages, which include nonlinear errors and limited time of use. In the present study, a new type of LASER interferometry using a laser diode is proposed. Using LASER Diode Sinusoidal Phase Modulating (LD-SPM) interferometry, the phase modulation can be directly modulated by controlling the LASER Diode injection current thereby eliminating the need for PZT and its components. This makes the interferometry more compact. This paper reports on a new approach to the LD Modulating interferometry that involves four-buckets phase shift method. This study proposes a four-bucket phase mapping algorithm, which was developed to have a guaranteed application, to stabilize the system in the field and to be a user-friendly GUI. In this paper, the theory for LD wavelength modulation and sinusoidal phase modulation of LD modulating interferometry is shown. Four-bucket phase mapping algorithm is then introduced.

• Korean Journal of Optics and Photonics
• /
• v.27 no.3
• /
• pp.101-105
• /
• 2016

In this study we propose the novel optimization method of the phase-only computer-generated hologram (CGH), to improve calculation speed compared to the conventional method. While the conventional method is calculated using numerical analysis, the novel method is calculated using the phase-shift characteristic of Fourier transformation. In addition, the selectivity of noise filtering lets it decrease the calculation time. The validity of the reconstructed image using the novel method is verified by comparing simulation results to ideal and conventional data, and the improvement of texture and sharpness of the reconstructed image is confirmed by simulation.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.4
• /
• pp.3-10
• /
• 2005

Every cell position of a maximum-length 90/150 cellular automata(CA) generates the same pseudo-noise(PN) sequence corresponding to the characteristic polynomial of the CA with a phase shift. Unlike LFSRs, the phase shift is generally different between stages of a CA. In this paper, we propose an algorithm to compute relative phase shifts between stage of a CA. Our algorithm does not need Shank's algorithm to compute relative phase shifts and does not need any previous phase shifts to compute a phase shift. Moreover it is done in time $O(2^n)$.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.1
• /
• pp.16-29
• /
• 2022

This paper presents a Doppler shift estimation method and signal processing schemes for Direct Sequence Spread Spectrum (DSSS) transmission to overcome the Doppler shift due to the moving of the underwater communication unit. The proposed method estimates a Doppler shift via 2 step procedures using the preamble with the two 64-length Frank sequences which has a good self-correlation characteristic and is insensitive to the Doppler shift. Furthermore, a packet of DSSS underwater mobile communication and a RAKE receiver are designed using the proposed Doppler shift estimation method. Due to the modulation scheme of the designed DSSS underwater mobile communication using Differential-Quadrature Phase Shift Keying (DQPSK) for the data symbol transmission, the RAKE receiver dose not need a phase tracking and easily makes coherent signals among the combining RAKE branches. The designed RAKE receiving scheme including the proposed Doppler shift estimation method successfully decides information data using the DSSS signal transmitted from the pseudo-moving transmitter with velocity upto about 17.5 m/s.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.2
• /
• pp.131-137
• /
• 2013

In this paper, the phase-shift full-bridge DC/DC converter with fixed-phase operation inverter is proposed. The proposed circuit consists of two full-bridge inverters which are connected in parallel. While one full-bridge inverter operates as the fixed-phase, it regulates the output voltage by adjusting the phase of the other inverter. During the normal operation period, the proposed circuit makes the less amount of conduction loss of the primary switches and secondary synchronous rectifiers, as well as the less amount of the current ripple of the output inductor, than the conventional phase-shift full-bridge DC/DC converter does. Also, it achieves high efficiency by reducing the snubber loss of the secondary synchronous rectifier. To sum up, the present inquiry analyzes the theoretical characteristics of the proposed circuit, and shows the experimental results from a prototype for 450W power supply.

• Journal of the Optical Society of Korea
• /
• v.20 no.2
• /
• pp.223-227
• /
• 2016

The impact of optical receiver configuration on in-band crosstalk-induced penalty has been investigated in both theoretical and experimental analyses, for differential phase-shift keying (DPSK) and differential quadrature phase-shift keying (DQPSK) signals. Previously it has been shown that DPSK signals are ~6 dB more tolerant to in-band crosstalk than on-off keying (OOK) signals. However, we find that the tolerance difference between the two signals is reduced to ~3 dB when the decision threshold of the receiver is optimized to minimize the bit-error rate for each signal. Then we derive simple equations for the in-band crosstalk-induced penalty in DPSK and DQPSK signals with two different optical receiver configurations: balanced and single-ended direct-detection receivers. We confirm that the penalties obtained from our simple equations agree well with the measured results.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.132-135
• /
• 2008

This paper presents a PLL(Phase Lock Loop) control method for speed control of high speed miniature BLDCM(Brushless DC Motor) using hall sensor. The Proposed PLL based speed control method uses a only phase shift between reference pulse signal according to speed reference and actual pulse signal from hall sensor. It doesn't use any speed calculation, and calculates a direct current reference from phase shift. The current reference is changed to reduce the phase shift between reference and actual pulse. So the actual speed can keep the reference speed. The proposed control scheme is very simple but effective speed control is possible.