• Journal of information and communication convergence engineering
• /
• 제7권3호
• /
• pp.304-308
• /
• 2009

This paper proposes a new concept of a signal constellation of the recently introduced half-symbol-rate-carrier phase-shift keying (HSRC-PSK) modulations for bandwidth-efficient high speed data communications. Since the HSRC-PSK modulations contain different symbol energies representing the same bit sequences due to the loss of orthogonality of their HSRC signals, it is very hard to represent the symbol using the conventional signal constellation. To resolve the problem, two different energies are assigned to represent one symbol for the HSRC offset quadrature phase shift keying (OQPSK) modulation. Similarly, the different energies exist to display the different symbol for HSRC minimum shift keying (MSK) modulation. With the proposed signal space representation, HSRC-PSK symbol can easily be shown with a two-dimensional scatter plot which provides helpful information of evaluating HSRC-PSK signal's quality.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.327-328
• /
• 2005

Bi-system thin films are prepared by ion beam sputtering technique. Three phases of Bi-2201, Bi-2212 and Bi-2223 appear as stable ones in spite of the conditions for thin film fabrication of Bi-2212 and Bi-2223 compositions, depending on substrate temperature($T_{sub}$) and ozone pressure($PO_3$). It is found out that these phases show similar $T_{sub}$ and $PO_3$ dependence, and that the stable regions of these phases are limited within very narrow temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.58-60
• /
• 1999

This paper presents dynamic performance prediction using Matlab / simulink after parameter estimation of synchronous reluctance motor considering iron loss. Test motor is 3 phase SynRM with the segmental rotor, rating power is 0.175KW. Experiment equipment is consists of testing motor, dynamometer, vector invertor dynamocontroller, and power analyser. The stator iron loss and rotor iron loss are modelled by additional windings on three-phase winding axis. These windings are transformed into d-q axis, and are represented as equivalent eddy current windings. P-Q circle diagram method and single phase standstill method are used to measure motor parameters considering iron loss.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.59-62
• /
• 2003

This study investigated the phase transformation of the $REBa_2Cu_3O_{7-x}$ (RE=Nd, Gd, By) superconductor, and CCT (Continuous-Cooling-Transformation) along with the TTT (Time-Temperature-Transformation) diagrams are suggested according to the isothermal and continuous cooling heat-treatments. According to result of fabricated single crystal of RE-123 superconductor through TSMG method based on phase transformation neted among heat treatment process, when the ionic radius elements was decreased, RE-211 phase was well-distributed. According to result that examine about seed of pretreatment effect of TSMG method, magnetic hysteresis improved when preprocess among oxygen atmosphere in same seed. and used after. Effect of miscut expressed good superconducting special quality in case miscut uses big seed.

• Bulletin of the Korean Chemical Society
• /
• 제11권6호
• /
• pp.508-511
• /
• 1990

The simple binary mixtures of pure phospholipids such as DPPC:DSPC and DPPC:DPPA were investigated with differential scanning calorimeter. The thermotropic properties of DPPC and DSPC mixtures did not deviate much from the ideal curves that was obtained on varying either the temperature or the relative proportions of phospholipids. This means that the two phospholipids are completely miscible in the liquid and solid phase. But the thermotropic properties of DPPC and DPPA mixture deviated much from the ideal phase diagram. It resulted from the repulsion between the head groups of acidic phospholipids. Heat capacity suggested by Harden McConell was calculated. The larger $C_p$ was, the sharper the endothermic peak became.

• Bulletin of the Korean Chemical Society
• /
• 제15권3호
• /
• pp.193-197
• /
• 1994

Due to possibility of visual observation of phase transformations and processes during solidification, the transparent binary alloy models are important in materials and metallurgical sciences. As such, phase diagram, linear velocity of crystallization, microstructure and spectral behaviour of binary organic systems of benzidine with resorcinol and catechol involving formation of addition compound with congruent melting point have been studied. While their phase diagrams show the formation of two eutectics and a 1:2 (B:RC, B:CT) addition compound in each case, the crystallization data obey the Hillig-Turnbull equation. The microstructural investigations give the characteristic morphology of the eutectics and the addition compounds, the spectral studies suggest intermolecular hydrogen bonding between two components forming the molecular complex.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1071-1079
• /
• 2007

In this paper, a novel space vector control method for isolated multi-level inverter using 3-phase low frequency transformers is proposed. This method is based on the simplification of the space-vector diagram of a five-level inverter using calculated table into fully programming method. The execution time of the proposed method is about same as that of the method using calculated table. Also, the proposed method is easily applied to other case level inverter. We applied this method into the 3-phase IHCML inverter using common arm. It makes possible to use a single DC power source due to employing low frequency transformers. In this inverter, the number of transformers could be reduced compare with an exiting 3-phase multi-level inverter using single phase transformer. In addition, this method generates very low harmonic distortion operation with nearly fundamental switching frequency. Finally, We tested multi-level inverter to clarify electric circuit and reasonableness through Matlab simulation and experiment by using prototype inverter.

• 한국분말재료학회지
• /
• 제23권3호
• /
• pp.202-206
• /
• 2016

A Ni-Ti-B alloy powder prepared by mechanical alloying (MA) of individual Ni, Ti, and B components is examined with the aim of elucidating the phase transitions and crystallization during heat treatment. Ti and B atoms penetrating into the Ni lattice result in a Ni (Ti, B) solid solution and an amorphous phase. Differential thermal analysis (DTA) reveals peaks related to the decomposition of the metastable Ni (Ti, B) solid solution and the separation of equilibrium $Ni_3Ti$, $TiB_2$, and ${\tau}-Ni_20Ti_3B_6$ phases. The exothermal effects in the DTA curves move to lower temperatures with increasing milling time. The formation of a $TiB_2$ phase by annealing indicates that the mechanochemical reaction of the Ni-Ti-B alloy does not comply with the alloy composition in the ternary phase diagram, and Ti-B bonds are found to be more preferable than Ni-B bonds.

• Macromolecular Research
• /
• 제17권6호
• /
• pp.365-377
• /
• 2009

In this feature article, we briefly review the new methods we have utilized recently in the investigation of morphology and phase behavior of block copolymers. We first describe the chromatographic fractionation method to purify block copolymers from their side products of mainly homopolymers or block copolymer precursors inadvertently terminated upon addition of the next monomer in the sequential anionic polymerization. The chromatographic method is extended to the fractionation of the individual block of diblock copolymers which can yield the diblock copolymer fractions of different composition and molecular weight, which also have narrower distributions in both molecular weight and composition. A more detailed phase diagram could be constructed from the set of block copolymer fractions without the need of acquiring many block copolymers each prepared by anionic polymerization. The fractions with narrow distribution in both molecular weight and composition exhibit better long-range ordering and sharper phase transition. Next, epitaxial relationships between two ordered structures in block copolymer thin film is discussed. We employed the direct visualization method, transmission electron microtomography(TEMT) to scrutinize the grain boundary structure.

• Corrosion Science and Technology
• /
• 제19권3호
• /
• pp.146-155
• /
• 2020

To elucidate the effect of heat inputs on phase transformation and resistance to intergranular corrosion of F316 austenitic stainless steel (ASS), thermodynamic calculations of each phase and time-temperature-transformation diagram were conducted using JMaPro simulation software, oxalic acid etch test, double-loop electrochemical potentiokinetic reactivation test (DL-EPR), field emission scanning electron microscopy with energy dispersive spectroscopy, and transmission electron microscopy analyses of Cr carbide (Cr₂₃C₆), austenite phase and ferrite phase. F316 ASS containing a relatively low C content of 0.043 wt% showed a slightly sensitized microstructure (acceptably dual structure) due to a small amount of Cr carbide precipitated at heat affected zone irrespective of heat inputs. Based on results of DL-EPR test, although heat input was increased, the ratio of I_r to I_a was only increased very slightly due to a slight sensitization. Therefore, heat inputs have little influences on resistance to intergranular corrosion of F316 austenitic stainless steel containing 0.043 wt% C.