• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.467-472
• /
• 2000

It is known that chloride ion in concrete destroys the passive film of reinforcement inside concrete and accelerates corrosion which is the most influencing factor to durability of concrete structures. In this thesis, a chloride ion diffusion model for blast furnace slag(BFS) concrete, which has better resistance to both damage due to salt and chloride ion penetration than ordinary portland cement concrete, is proposed by modifying existing model of normal concrete. Proposed model is verified by comparing diffusion analysis results with both results by indoor chloride penetration test for specimens and field test results for actual RC bridge pier. Also, the optimum resistance condition to chloride penetration is obtained according to degrees of fineness and replacement ratios of BFS concrete. As a result, resistance to chloride ion penetration for BFS concrete is more affected by replacement ratio than degree of fineness.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.873-876
• /
• 2006

At the green roof on the concrete structure, root penetration can be the most problem to water leakage. Root occur cracks due to penetrate to concrete which have porous organization by itself. Crack on the concrete structure would be constantly shrinks and expands, it occur to water leakage and decrease durability of concrete structure. Therefore, in this paper, the result of the root penetration test for waterproofing which protect concrete structure from the water leakage or other environment conditions would be apply to understand the reason of root penetration.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.71-74
• /
• 2008

For reinforcing the overturn of concrete pole instituted in slope ground and weak ground, in this paper, develop the reinforcing installation. The installation increase penetration depth and effect of increasing the penetration depth is verified by experimental paper of Lim, jong suk(2004). In this research, through the experiment of bending test using the reinforcing installation, evaluate the performance. In the result of experiment, concrete pole behave elastically in design load and all sample are safe up to failure load.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권3호
• /
• pp.116-124
• /
• 2014

콘크리트용 무기계 방수제는 내부 막을 형성하지 않기 때문에 무기계 방수제의 침투깊이 정량적으로 평가하기 어렵다. 그러나 무기계 방수제의 침투깊이 평가는 일관된 침투효율을 확보하는데 있어서 매우 중요한 평가지표 중 하나이다. 따라서 본 논문에서는 콘크리트용 무기계 방수제의 침투깊이 측정방법을 고안하였으며, 고안된 침투깊이 측정방법을 통하여 기존 무기계 방수제의 침투깊이를 평가하였다. 실험결과 고안된 무기계 방수제의 침투깊이 측정방법을 통하여 평가된 침투깊이는 90% 이상의 신뢰성이 있는 것으로 나타났다.

• 한국지반환경공학회 논문집
• /
• 제19권11호
• /
• pp.5-14
• /
• 2018

전 세계적으로 토목공사 현장에서 토사의 다짐작업은 중요한 공종 중 하나의 공종이다. 특히 도로공사에서의 다짐작업은 공사 후에도 부실시공과 밀접한 관계를 가지고 있으므로 매우 중요하게 평가된다. 현재는 여러 가지 다짐도 측정방법 중에 평판재하시험이나 모래 치환법에 의한 흙의 단위 중량 시험방법을 가장 많이 사용하고 있으나 많은 시간과 장비가 필요하며 인력도 많이 소모되어 경제성을 확보하지 못하고 있다. 본 연구에서는 중력에 의한 자유낙하 물체의 관입 깊이에 따라 다짐도 측정방법인 자유낙하 관입깊이별 다짐도 시험(Free-Fall Penetration Test, FFPT) 일명 휴대용 다짐도 측정기를 이용하여 현장실험을 실시하여 다짐도와 관입깊이 그래프를 작성하였고 낙하고 10cm에서 결정계수 값이 0.963으로 가장 정확도가 높았으며 그래프는 가로축과 세로축 모두 10진법 그래프로 작성하였으며, 허용오차범위는 관입깊이 기준으로 ${\pm}1.28mm$로 작성되었다. 휴대용 다짐도 측정기를 통하여 현장에서 간단하고 신속, 정확한 다짐도 측정이 가능하여 경제성 확보와 공정 관리가 편리하게 진행될 것이다.

• 대한토목학회논문집
• /
• 제26권6C호
• /
• pp.377-384
• /
• 2006

다짐된 모래-벤토나이트 혼합토의 인장강도 측정을 위한 새로운 시험방법을 개발하기 위하여 일축관입(UP)시험에 대한 이론적 실험적 측면에서의 연구를 실시하였다. 다짐된 혼합토의 인장강도는 완전소성이론을 이용한 한계해석으로부터 계산될 수 있으며 개량일축관입시험기(Improved Unconfined Penetration, IUP)는 기존의 일축관입시험기와 비교하여 시험기기의 개선을 통해 측정 오류를 감소시켰다. 선행 시험 결과 원반의 크기와 재하속도의 증가와 pH가 높아(산성)짐에 따라 인장강도가 증가함을 알 수 있었다. 또한 원반 직경이 25.4mm이며 재하속도가 0.5%/min~1%/min일 경우가 개량일축관입시험에 가장 적합하다는 것을 알 수 있었다. 할렬인장시험 결과와의 비교를 통해 개량일축관입시험법의 신뢰성도 확인하였다.

• 한국해양공학회지
• /
• 제32권5호
• /
• pp.310-323
• /
• 2018

In order to protect lives and prevent large-scale injuries in the event of a fire on a ship or an offshore plant, most classification societies are strengthening their fire resistance designs of relevant cargo holds and accommodation compartments to keep flames from being transferred from a fire point to other compartments. Particularly in critical compartments, where flames should not propagate for a certain period of time, such as the A60 class division, both the airtightness and fire-resistant design of a piece passing through a bulkhead are subject to the Safety of Life at Sea Convention (SOLAS) issued by the International Maritime Organization (IMO). In order to verify the suitability of a fire-resistant design for such a penetrating piece, the fire test procedure prescribed by the Maritime Safety Committee (MSC) must be carried out. However, a numerical simulation should first be conducted to minimize the time and cost of the fire resistance test. In this study, transient thermal analyses based on the finite element method were applied to investigate the heat transfer characteristics of a bulkhead penetration piece for the A60 class compartment. In order to determine a rational bulkhead penetration piece design, the transient heat transfer characteristics according to the variation of design parameters such as the diameter, length, and material were reviewed. The verification of the design specification based on a numerical analysis of the transient heat transfer performed in this study will be discussed in the following research paper for the actual fire protection test of the A60 class bulkhead penetration piece.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.127-132
• /
• 2001

An experimental study on penetration integrity of the reactor vessel has been performed under external vessel cooling during a core melt accident. In this study a series of experiments are performed for the verification of the effects of coolant in the annulus between the ICI(In-Core Instrumentation) nozzle and the thimble tube and also the effects of external vessel cooling on the integrity of the penetration using the test section including only one penetration and $Al_{2}O_{3}$ melt as a corium simulant. The experimental results have shown that penetration is more damaged in the case of no external vessel cooling compared with the case of external vessel cooling. It is preliminarily concluded that the external vessel cooling is very effective measure for the improvement of the penetration integrity. Also it is confirmed from the experimental results that the coolant in the annulus reduces the melt penetration distance through the annulus and enhance the integrity of the reactor vessel penetration in the end.

• 한국압력기기공학회 논문집
• /
• 제10권1호
• /
• pp.15-19
• /
• 2014

A Failure or degradation of reactor upper head penetration is a recurring problem due to long term operation at nuclear power plants. And a flaw in the reactor upper head penetration has caused unplanned plant shutdown for repair as well as high economic impact on the plants. Consequently, a detection of flaws is of the utmost importance. Prior to the replacement of reactor upper head penetration, some utilities have repaired the flaws of reactor upper head penetration generated by overlay weld. Until now, only the base metal in reactor upper head penetration has been inspected according to 10 CFR 50.55a and ASME code case N-729-1. Accordingly, it is difficult to detect manufacturing defects and repair defects in overlay weld. This paper presents a case study on the application of Time of Flight Diffraction technique for reactor head penetration mockup with artificial flaws in overlay weld. This study offers a way to understand the flaws detected in reactor upper head penetration overlay weld.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.541-546
• /
• 2006

Recently, slope failures are happen to natural disastrous when they occur in mountainous areas adjoining highways in Korea. The accidents associated with slope failures have increased due to rapid urbanization of mountainous areas. Therefore, Regular maintenance is essential for all slope and needs maintenance of road safety as well as road function. The purpose of this paper is to recommend a standard of a $N_{10}^{\sim}$ value of Distribution of a potential failure layer using PPT(Portable penetration test).