• 한국정밀공학회지
• /
• 제30권10호
• /
• pp.1095-1101
• /
• 2013

The purpose of this study was to verify the effect on improvement of muscle strength unbalance according to load deviation protocol during whole body vibration exercise. Seventeen female volunteers (age $22{\pm}3$ years, height $160{\pm}4.9$ cm, weight $49{\pm}.8$ kg) participated in this experiment. The subjects performed squat exercise in WBV platform. Exercise were performed five set a day including 15 time a set, three days a week, and during 4 weeks. Vibration stimulus was 25Hz as frequency and intensity was dominant leg 1mm and non-dominant leg 4mm. The results in WBV group showed that the differences of peak torque in 16% were getting decreasing significantly after 4 weeks from 16.2% to 5.2%. This result means that WBV with load deviation protocol could provide muscle strength exercise for muscle strength balance. Our study found out that WBV of load deviation protocol could provide muscle strength exercise for improving muscle imbalance.

• 한국인터넷방송통신학회논문지
• /
• 제23권4호
• /
• pp.137-142
• /
• 2023

SMPS(Switched Mode Power Supply, 전력공급장치) 회로설계 시 특별한 고찰 없이 지나치기 쉬운 부분이 스너버(snubber) 회로이다. 그러나 스너버(snubber) 회로에 따른 SMPS의 성능저하 및 SET 전체에 미치는 영향은 결코 무시할 수 없다. 또한 스위칭시 피크치 전압과 전류로부터 소자를 보호하고 on/off 스위칭시 손실을 줄여주기 위하여 스위치 양단에 스너버(snubber) 회로를 부가해준다. 따라서 본 논문에서는 스너버(snubber) 회로에 대한 충분한 이해를 위해 이론적 해석 및 실제 회로설계 때 설계자가 응용할 수 있는 실험식을 정리하여, 스너버(snubber) 회로의 최적화를 도모하고자 한다.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4095-4101
• /
• 2022

Following the climate-related disasters considered by several efforts, the nuclear capacity needs to double by 2050 compared to 2015. So, it is reasonable to investigate global warming incorporated with the fuzzy set theory for nuclear energy consumption in the aspect of fuzziness and nonlinearity of temperature variations. The complex modeling is proposed for the enhanced assessment of climate change where simulations indicate the degree of influence with the Boolean values between 0.0 and 1.0 in the designed variables. In the case of OIL, there are many 1.0 values between 20^th and 60^th months in the simulations where there are 10 times more for a 1.0 value in influence. Hence, the temperature variable can give the effective time using this study for 100 months. In the analysis, the 1.0 value in NUCLEAR means the highest influence of the modeling as the temperature increases resulting in global warming. In detail, the first influence happens near the 8th month and then there are four times more influences than effects in the early part of the temperature mitigation. Eventually, in the GLOBAL WARMING, the highest peak is around the 20^th month, and then it is stabilized.

• 한국식품조리과학회지
• /
• 제27권4호
• /
• pp.27-34
• /
• 2011

The function of mulberry leaves and the quality of muffins including mulberry leaves were examined. The electron donating ability of both a water and ethanol extract was 40% for both at 100 ppm, 62 and 72% at 500 ppm, and 77 and 83% at 1,000 ppm respectively. These experiments showed good oxidized substance activity. The SOD-like ability of the water and ethanol extracts at 1,000, 500, and 300 ppm was 49% and 55%, 33% and 39%, and 28% and 33% respectively. These results show that the ethanol extract had higher SOD-like ability than that of the water extract. The nitrite scavenging abilities of 1,000 ppm of the mulberry leaf water extract and ethanol extract at pHs of 1.2 and 3.0 were 40.5 and 47%, and 20 and 22% respectively. The Hunter lightness value tended to be lower as the amount of added mulberry leaves increased compared to the contrast set, so the lightness level with a 7% addition was the lowest. The contrast set was the highest for redness and added mulberry leaves tended to decrease redness at 3% but tended to increase it again with additions >3%. The b-value (yellowness) showed a similar tendency as redness. Adding Mulberry leaves tended to decrease the contrast set to the lowest level, then values increased slowly to a peak at 5% added mulberry leaf and then decreased thereafter. Strength and hardness were less after increasing added mulberry leaf. Cohesiveness, springiness, gumminess and brittleness, decreased at up to 5% added mulberry leaves but the 7% addition showed the same level as the contrast set. The mulberry leaves muffins were less preferred to the contrast set in appearance and color. However, the mulberry leaf muffins were preferred to the contrast set in taste and flavor but the result was not significant. Overall the quality of the muffins with 3% added mulberry leaves was preferred over the 1% added mulberry leaf muffins.

• Nuclear Engineering and Technology
• /
• 제28권2호
• /
• pp.103-117
• /
• 1996

본 논문에서는 증기폭발의 전파과정을 해석하기 위한 수학적 모델을 제시하였다. 이 모델은 용융물, 용융파편, 그리고 냉각재 기상과 액상 등 4상 유체의 2차원적인 천이거동을 지배방정식 및 관련상관식의 수치적 해를 구함으로서 예측할 수 있다. 모델에 사용된 주요 상관식은 용융물 분쇄, 냉각재 상변화, 에너지 교환, 그리고 운동량 교환항으로 구성되어 있다. 그리고, 냉각재(물)의 상태방정식은 냉각재의 기상과 액상 사이의 열역학적 인 비평형을 허용할 수 있는 독특한 형태로 구성되었다. 주석 /물의 중기폭발에 대한 예제계산을 수행한 결과 본 모델이 폭발의 전파속도 및 압력 -비록 그 정량적인 값은 관련상관식의 인자들에 좌우되지마는- 등의 증기폭발 전파과정의 주요현상을 적절히 모사할 수 있음을 알 수 있었다. 또한 중요한 초기변수(중기 분율, 용융물 분율) 및 관련상관식에 대한 민감도 분석도 수행되었다.

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.11-18
• /
• 2015

PURPOSES: This study aims to evaluate the runoff reduction with permeable pavements using the SWMM analysis. METHODS: In this study, simulations were carried out using two different models, simple and complex, to evaluate the runoff reduction when an impermeable pavement is replaced with a permeable pavement. In the simple model, the target area for the analysis was grouped into four areas by the land use characteristics, using the statistical database. In the complex model, simulation was performed based on the data on the sewer and road network configuration of Yongsan-Gu Bogwang-Dong in Seoul, using the ArcGIS software. A scenario was created to investigate the hydro-performance of the permeable pavement based on the return period, runoff coefficient, and the area of permeable pavement that could be laid within one hour after rainfall. RESULTS : The simple modeling analysis results showed that, when an impervious pavement is replaced with a permeable pavement, the peak discharge reduced from $16.7m^3/s$ to $10.4m^3/s$. This represents a reduction of approximately 37.6%. The peak discharge from the whole basin showed a reduction of approximately 11.0%, and the quantity decreased from $52.9m^3/s$ to $47.2m^3/s$. The total flowoff reduced from $43,261m^3$ to $38,551m^3$, i.e., by approximately 10.9%. In the complex model, performed using the ArcGIS interpretation with fewer permeable pavements applicable, the return period and the runoff coefficient increased, and the total flowoff and peak discharge also increased. When the return period was set to 20 years, and a runoff coefficient of 0.05 was applied to all the roads, the total outflow reduced by $5195.7m^3$, and the ratio reduced to 11.7%. When the return period was increased from 20 years to 30 and 100 years, the total outflow reduction decreased from 11.7% to 8.0% and 5.1%, respectively. When a runoff coefficient of 0.5 was applied to all the roads under the return period of 20 years, the total outflow reduction was 10.8%; when the return period was increased to 30 and 100 years, the total outflow reduction decreased to 6.5% and 2.9%, respectively. However, unlike in the simple model, for all the cases in the complex model, the peak discharge reductions were less than 1%. CONCLUSIONS : Being one of the techniques for water circulation and runoff reduction, a high reduction for the small return period rainfall event of penetration was obtained by applying permeable pavements instead of impermeable pavement. With the SWMM analysis results, it was proved that changing to permeable pavement is one of the ways to effectively provide water circulation to various green infrastructure projects, and for stormwater management in urban watersheds.

• Journal of Radiation Protection and Research
• /
• 제45권3호
• /
• pp.117-129
• /
• 2020

Background: Radiation portal monitors (RPMs) involving plastic scintillators installed at the border inspection sites can detect illicit trafficking of radioactive sources in cargo containers within seconds. However, RPMs may generate false alarms because of the naturally occurring radioactive materials. To manage these false alarms, we previously suggested an energy-weighted algorithm that emphasizes the Compton-edge area as an outstanding peak. This study intends to evaluate the identification of radioactive sources using an improved energy-weighted algorithm. Materials and Methods: The algorithm was modified by increasing the energy weighting factor, and different peak combinations of the energy-weighted spectra were tested for source identification. A commercialized RPM system was used to measure the energy-weighted spectra. The RPM comprised two large plastic scintillators with dimensions of 174 × 29 × 7 ㎤ facing each other at a distance of 4.6 m. In addition, the in-house-fabricated signal processing boards were connected to collect the signal converted into a spectrum. Further, the spectra from eight radioactive sources, including special nuclear materials (SNMs), which were set in motion using a linear motion system (LMS) and a cargo truck, were estimated to identify the source identification rate. Results and Discussion: Each energy-weighted spectrum exhibited a specific peak location, although high statistical fluctuation errors could be observed in the spectrum with the increasing source speed. In particular, ¹³⁷Cs and ⁶⁰Co in motion were identified completely (100%) at speeds of 5 and 10 km/hr. Further, SNMs, which trigger the RPM alarm, were identified approximately 80% of the time at both the aforementioned speeds. Conclusion: Using the modified energy-weighted algorithm, several characteristics of the energy weighted spectra could be observed when the used sources were in motion and when the geometric efficiency was low. In particular, the discrimination between ⁶⁰Co and ⁴⁰K, which triggers false alarms at the primary inspection sites, can be improved using the proposed algorithm.

• 한국조경학회지
• /
• 제41권6호
• /
• pp.52-61
• /
• 2013

본 연구는 여름철 낮 그늘시렁의 차양이 온열쾌적 지표에 미치는 영향을 파악하고자 수행하였다. 이를 위해 여름철 차양 및 겨울철 방풍을 고려하여 갈대발로 천개면 등을 차폐한 3가지 유형의 그늘시렁(가로 4m${\times}$세로 4m${\times}$높이 2.7m) I(천개면 차폐) II(천개면, 서향면 차폐) III(천개면, 서향면, 북향면 차폐)을 4층 옥상에 구축하였다. 그리고 1차 실험은 2013년 8월 14일부터 16일까지 대조구, 그늘시렁 I, III을 대상으로, 2차 실험은 2013년 8월 26일부터 28일까지 대조구, 그늘시렁 I, II를 대상으로 기상변수(기온, 습도, 복사, 풍속)를 측정하였다. 그늘시렁의 차양이 인체가 흡수하는 복사환경과 $T_{mrt}$ 및 $SET^*$에 미치는 영향은 다음과 같다. 그늘시렁의 차양으로 인해 인체가 흡수한 복사량의 저감은 단파복사가 장파복사에 비해 훨씬 크게 나타났다. 대조구 대비 인체가 흡수한 단파복사량 차이의 최댓값 ${\Delta}K_{abs,max}$는 그늘시렁 I과 III에서는 $-119W/m^2$와 $-158W/m^2$였으며, 그늘시렁 I과 II에서는 $-145W/m^2$와 $-159W/m^2$였다. 대조구 대비 인체가 흡수한 장파복사량의 차이의 최댓값 ${\Delta}L_{abs,max}$는 그늘시렁 I과 III에서는 $-15W/m^2$와 $-17W/m^2$였으며, 그늘시렁 I과 II에서는 $-8W/m^2$와 $-7W/m^2$였다. 그늘시렁의 차양에 의해 인체가 흡수한 $T_{mrt}$와 $SET^*$ 값도 낮아졌다. $T_{mrt}$는 1차 실험에서는 그늘시렁 I과 III에서 각각 최대 $16.0^{\circ}C$와 $21.4^{\circ}C$, 그리고 2차 실험에서는 그늘시렁 I과 II에서 각각 최대 $18.8^{\circ}C$와 $20.8^{\circ}C$ 저감되었다. $SET^*$는 1차 실험에서는 그늘시렁 I과 III에서 각각 최대 $2.9^{\circ}C$와 $2.6^{\circ}C$ 그리고 2차 실험에서는 그늘시렁 I과 II에서 각각 최대 $3.5^{\circ}C$와 $2.6^{\circ}C$ 저감되었다. 대조구 $SET^*$ 대비 그늘시렁 II, III의 $SET^*$ 저감효율은 그늘시렁 I에 비해 낮게 나타났는데, 이는 풍속의 차이 때문이었다. 따라서 그늘시렁 수직면의 차폐시에는 차양 못지않게 통풍을 고려하는 것이 필수적이라 생각된다. 대조구의 3일간 평균 최고기온이 $37.5^{\circ}C$였던 1차 실험기간 결과에서는 $SET^*$ 값이 하루 중 대부분 시간대에서 온열 쾌적대 및 수용대의 상한 값인 $28.7^{\circ}C$와 $30.4^{\circ}C$를 초과하였다. 반면에 대조구의 3일간 평균 최고기온이 $34.4^{\circ}C$였던 2차 실험결과, $SET^*$ 값이 그늘시렁 I에서는 18~12시와 오후 14~18시, 그늘시렁 II는 15~18시에만 온열 쾌적대에 드는 것으로 나타났다. 반면에 그늘시렁 I, II에서 $SET^*$ 값은 하루 중 대부분 시간대에서 온열 수용대에 드는 것으로 나타났다. 따라서 혹서기에 그늘시렁의 온열쾌적성을 확보하기 위해서는 갈대발 등에 의한 차양뿐만 아니라, 덩굴식물이나 녹음수에 의한 차양을 도입하는 방안을 강구하여야 할 것이다. 그리고 그늘시렁의 차양효과를 평가하는 지표로서 $T_{mrt}$와 $SET^*$는 실효성이 있었다고 판단되며, 향후 옥외 조경공간의 온열환경 평가 지표로서 활용이 기대된다.

• 융복합기술연구소 논문집
• /
• 제10권1호
• /
• pp.7-12
• /
• 2020

We describe a efficient surface reconstruction method that reconstructs a 3D manifold polygonal mesh approximately passing through a set of 3D oriented points. Our algorithm includes 3D convex hull, octree data structure, signed distance function (SDF), and marching cubes. The 3D convex hull provides us with a fast computation of SDF, octree structure allows us to compute a minimal distance for SDF, and marching cubes lead to iso-surface generation with SDF. Our approach gives us flexibility in the choice of the resolution of the reconstructed surface, and it also enables to use on low-level PCs with minimal peak memory usage. Experimenting with publicly available scan data shows that we can reconstruct a polygonal mesh from point cloud of sizes varying from 10,000 ~ 1,000,000 in about 1~60 seconds.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1989년도 봄 학술발표회 논문집
• /
• pp.5-10
• /
• 1989

In this study, the basic concept of design response spectrum is briefly revi-ewed. To generate the artificial earthquake acceleration, the method of superpo-sition of cosine waves is used. Theoretical developments using F.F.T. and spect-ral density function are compared. The amplitude was derived by use of the peak factor and the phase angle is d-erived by use of Monte Carlo simulation. To smoothen the match, the calculated pseudo velocity respon-se spectrum is compared with input pseudo velocity response spectrum at a set of control frequencies. With the modified spectral density function, a new acceleration and pseudo velocity response spectrum are generat-ed.