• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.358-363
• /
• 1997

The Operational Deflection Shape designates the motion pattern by which a structure vibrates under a specific operating condition. Modal Analysis is usually tested under test bench, but Operational Deflection Shape can be measured directly under real operating condition. It provide useful information for trouble-shooting and aid understanding and evaluation of the absolute dynamic behaviour of a machine or component. In this paper, It is analysed Excavator Upper Frame using Operating Deflection Shape.

• 한국초등수학교육학회지
• /
• 제14권3호
• /
• pp.827-842
• /
• 2010

이 논문에서는 초등학교 4학년 수학과 교육과정에서 제시하는 '무늬 만들기'의 교수학적 변환과 각색의 실제를 비판적으로 검토한다. 무늬 만들기에서의 그 무늬는 일반적으로 벽지무늬가 아니다 그것을 만드는 방식도 벽지무늬를 만드는 방식과 같지 않다. 벽지무늬 만들기가 아니라는 점에서 보면, 새로운 무늬 만들기의 맥락은 '투명 스티커 붙이기'라고 할 수 있다. 이 논문에서는 이 특정을 전제로 해서 단위조각의 모양, 새로운 무늬 만들기의 방법, 단위조각 이어 붙이기의 규칙에 관해 비판적으로 논의하고 있다 단위조각의 모양은 실질적으로 정사각형이 아니면 안된다. 주어진 단위조각을 사용하여 새로운 무늬를 만들 때, 만드는 방식의 규칙성만 제시할 수 있으면 실제로는 어떤 규칙이라도 무방하다. 주어진 단위조각으로 만드는 새로운 무늬와 벽지무늬 사이의 관계는 분명하지 않지만, 그 둘이 서로 무관하다고 보기 어렵다는 점에서, 무늬 만들기가 '잘못된 초등화(Freudenthal, 1973)'의 한 모습일 수도 있다.

• 패션비즈니스
• /
• 제20권4호
• /
• pp.15-35
• /
• 2016

The purpose of this study was to develop brassiere pattern designed to fit the breast shapes based on ESMOD pattern. It has three quarters cup round shape and also consists of three parts; upper cup, lower cup, and wings. Breast types are classified into five shapes; ideal breast, flat breast, upper developed breast, lower developed breast, and projecting breast. Two subjects for each breast type wore the brassiere, and they evaluated the appearance and wearing twice. Type I for research pattern designed to fit into the breast shape reflecting details of breast size were assessed as superior to the divided commercial type. However, wings' tightness of Type I for research pattern brassiere was high. Thus, to improve wearing satisfaction, extra was added to wing. Based on the results of wearing experiments of Type I for research, we adjusted and modified Type II for research pattern. Subsequently, its appearance and wearing were evaluated, in order to be improved. For upper developed breast pattern, we extended the length of lower part to balance upper and lower part, as the upper part was somewhat long. The lower developed breast has the closest feature to the ideal breast, suggestive that implies it does not require much improvement Projecting breast pattern has minimal space in the lower part, so we added the support to lift them to be similar to the ideal breasts. For all the breast shapes, we reduced the wings' tightness from 8% to 7% so that we could extend the length of the wings.

• 한국전기전자재료학회논문지
• /
• 제19권10호
• /
• pp.942-946
• /
• 2006

We simulated insulation defects of stator winding wire on high voltage generator by 5 types. 4 types have one discharge source and other one has multi discharge source by simulation. For accurate decision, measurements used to PRPD pattern to occurred partial discharge source of various types. In this research, when PRPD pattern carried out or analyzed pattern recognition of discharge source, it used to powerful tools. In this result, PRPD Pattern defined to have single discharge source of 4 types by insulation defect. When insulation defect simulated, all the defected winding have not the same result. Errors for a little different can make mistakes from a subtle distinction. The difference between internal and void discharge have magnitude of pulse amplitude of inner discharge bigger than void discharge and have a shape of bisymmetry. But void discharge has a shape of bisymmetry against maximum value on polarity respectively. In cases of slot and surface discharge, we confirmed to show similar results those other researchers. In case of multi-discharge, as a result of we could classify not perfect match with occurred patterns in single discharge eachother. In the future, we will have to recognize and classify with results of multi-discharge.

• 복식문화연구
• /
• 제17권1호
• /
• pp.15-27
• /
• 2009

The purpose of this study was to find texture which suitable for the acryl knitted jacket of women in the middle age. The study was carried out 2 parts. The first part was to choose the pattern fitted in the body shape of women in the middle age, and the second part was wearing test with 3 different textured acryl knitted jacket(half milano, milano, jacquard). The usable data of the test were coded for further statistical analysis including descriptive statistics (frequency and one way-ANOVA test, Student-Newman-Keuls Multiple Range Test) by using SPSSWIN 12.0. The results were as follows: It was found that first evaluation for the appearance test on fitness, pattern B(Brand: Morado) were better than the rest of them(pattern A: Trieste, pattern C: Escalier). It was found that second evaluation for the test, jacket with jacquard were better than the rest of them. Acryl knitted Jacket of women in the middle age should made of jacquard. Therefore it should be designed as possible as considering the physical characteristics of knitted materials. It was found that third evaluation for the test, it was opposite results that a general knitted fabric pattern was made smaller than a woven jacket. So, it was necessary that the acryl knitted jacket of women in the middle age follow a similar site tolerance such as a woven jacket. This result was due to a radical change of a middle age women's body shape.

• 한국의류학회지
• /
• 제40권2호
• /
• pp.273-286
• /
• 2016

Protective coveralls are very uncomfortable to work in comparison to ordinary top and bottom separated clothing. A pattern maker has to consider the size of the human body and human motion range when designing protective coverall patterns. It is difficult to produce well-fitted coveralls because of the lack of readymade patterns despite the increased need for protective coveralls at various jobs. Patterns are decomposed by unsewing 18 products in the domestic market to provide the fundamental information on developing patterns for protective coveralls. The characteristics and differences of pattern types are compared after grouping patterns with information taken from the analysis of the shapes and measurements of patterns from the acquired patterns. The results of the analysis showed that on-market protective coveralls were less curved but much linear when compared to ordinary clothing patterns; however, the breasts and crotch circumferences were very loose and bulky, which is quite different from the other all-in one style working clothes. For the pattern shapes, patterns are classified into waistline-seamed and bustline-seamed types. The result of the hierarchical cluster analysis with 27 measurement variables were classified into four groups. Types by shape and measurements were related to each other; therefore, we expect the information of each type to be used in developing protective clothing patterns.

• 수산해양기술연구
• /
• 제52권2호
• /
• pp.103-110
• /
• 2016

This study aims to estimate the species, size and shape of fish using a non-contact 3 dimensional pattern laser so that this preliminary test was carried out to understand the structural feature and length of goldfish according to water turbidity and depth in the aquacultural tank. 3-D pattern laser could clearly detect its morphological shape except the caudal fin due to soft tissue. Since the sensing strength of line laser light according to depth has sufficient power, it is possible to measure its depth and structural feature in the detected range. The result showed that the measured error of individual's fork length was less than ${\pm}1%$ in the water using 3-D pattern laser, when compared with the measured value in the air.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.156-164
• /
• 1998

Electronic Speckle Pattern Interferometry(ESPI) has been used to measure surface deformations of engineering components and materials in industrial areas. ESPI, a non-contact and non-destructive technique, is capable of providing full-field results with high spatial resolution and high speed. One of the important application using electronic speckle pattern interferometry is electronic speckle contouring of a diffused object for 3-D shape analysis and topography measurement. Generally the electronic speckle contouring is suitable for providing measurement range from millimeters to several centimeters. In this study, we introduce the contouring method by modified dual-beam speckle pattern interferometer and the shift of the two illumination beams through optical fiber in order to obtain the contour fringe patterns. We also describe formation process of depth contour fringes and grid contour fringes by shifting direction of the two illumination beams. Before the experiments, we performed the geometric analysis for dual-beam-shifted ESPI contouring, and then, the electronic speckle contouring experiment with various specimens. For quantitative analysis of the contour fringes, we used 4-frame phase shifting method with PZT Finally, good agreement between the geometric analysis and experimetal results is obtained.

• 한국통신학회논문지
• /
• 제16권2호
• /
• pp.180-195
• /
• 1991

본 논문은 한글 문자 패턴을 인식하기 위하여 쉐이프 패턴을 대상으로 한글의 구조적 정보를 이용한 새로운인식 방법에 대해서 연구하였다. 먼저, 입력된 데이타에 대하여 문자의 위치를 알기 위하여 문자 영역의 블럭화를 행하였고, 둘째로 한글의 무게 중심을 이용한 종모음의 유무를 결정하고, 횡모음과 짧은 기둥의 위치와 길이 조사 및 종정의 존재 여부를 조사하여 한글이 가지는 6가지의 기본 구조로 형식 분류를 하였으며, 마지막으로 분류된 형식에 따라 각각의 자소에 대해 유크리드 기리(Uclid distance)에 의한 탬플레이트 매칭(template matching)을 실행하여 인식을 행하였다. 본 연구는 실험을 통하여 총 2350자의 문자에 대하여 98.3%의 형식 분류율과 95.2%의 한글 인식율을 얻었다.

• 한국멀티미디어학회논문지
• /
• 제2권4호
• /
• pp.400-408
• /
• 1999

본 논문에서는 복수 모델영상 간의 휘도치의 차이(이를 상위도라고 정의함)를 기본으로 영상매칭의 기준이 되는 "상위도 패턴"을 만드는 방법과, 이를 이용하여 입력영상과 모델영상간의 거리 계산에 의해 손의 형상을 인식하는 알고리듬에 대해 기술한다 이 방법의 특징은 인식과정에서 에지나 코너 등과 같은 기하학적 형상특징을 이용하는 것이 아니고, 영상전체를 하나의 처리단위로 하여 다수의 영상으로부터 구한 단순한 휘도치 차이를 2차원의 형상으로 패턴화 하여 인식과정에 사용한다는 점이다. 따라서 대량의 모델이 상호간에 갖는 상관관계가 인식과정에서 동시에 적용되기 때문에 대규모의 영상을 비교할 필요가 있는 인식 알고리즘의 실현에 매우 적합하다.