• Journal of KIISE:Information Networking
• /
• v.35 no.6
• /
• pp.510-520
• /
• 2008

These days, the network convergence for utilizing heterogeneous network on mobile device is being very actively studied. However, understanding characteristics of physical network interfaces and video encoder is needed for using the network convergence technologies efficiently. Thus, this paper proposes an optimized method for streaming video data through different network paths depending on data characteristics and channel condition. Accordingly, unlike the traditional methods, this study divides scalable coded videos by layer importance, the importance of stream information, and the importance in consideration of video decoder's robustness and selectively sends the data via multiple channels. And the experimental results show over 1dB increment in PSNR. The result of this study will provide an optimized video transmission technique in the next generation network convergence environment in which mobile devices have multiple network interfaces.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.247-250
• /
• 2007

There are three main kinds of service standards for 3G(Third-Generation) wireless communication as WCDMA, CDMA2000 and TD-SCDMA(Time Division-Synchronous Code Division Multiple Access). Compare with WCDMA and CDMA2000, TD-SCDMA system has distinguished technical characters. It is a TDD(Time Division Duplexing) based technology and deploys several advanced but in some respects complex technologies such as smart antenna, joint-detection and baton-handoff, etc. Therefore to analyze and design TD-SCDMA wireless network, it needs more efficient and systematic simulation tool. General simulation tool has so many analysis functions including path loss prediction, capacity and coverage analysis. For more suitable for TD-SCDMA, new additional technologies have to be implemented in simulation tool. Especially as the wireless network highly advancing focused on data service, it more needs to research and develop on the reliability of the simulation tool. In this paper, to give the concrete process and skill about how to implement TD-SCDMA simulation tool, we define the kinds of simulation tool and list basic analysis functions available for TD-SCDMA network design at first. And then we explain how to consider the effects of new technologies of TD-SCDMA and give the solutions about theses considerations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.495-502
• /
• 2013

In the mobile Ad hoc Network(MANET), improving technique for management and control of topology is recognized as an important part of the next generation network. In this paper, we proposed an efficient node life time management of ATICC(Adaptive Time Interval Clustering Control) in Ad-hoc Networks. Ad-hoc Network is a self-configuration network or wireless multi-hop network based on inference topology. This is a method of path routing management node for increasing the network life time through the periodical route alternation. The proposed ATICC algorithm is time interval control technique depended on the use of the battery energy while node management considering the attribute of node and network routing. This can reduce the network traffic of nodes consume energy cost effectively. As a result, it could be improving the network life time by using timing control method in ad-hoc networks.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.40-43
• /
• 2006

Public demand for the heat pump system as a next generation energy equipment is increasing for its eco-friendly and cost-effective advantage. Many researches have been concentrated on how to calculate and develop its own efficiency, while the possible effect of the heat pump operation on the whole subsurface temperature distribution is relatively less considered, During the current study, subsurface temperature disturbance caused by seasonal surface temperature cycle in Busan area and general W-tube heat pump operation is simulated in 3-dimensional heterogeneous medium. It shows that subsurface deeper than 10m from the surface remains nearly unchanged throughout the 4 seasons and groundwater convect ion in highly permeable layer near the surface acts like a main path of heat plume from heat pump system, This implies the significance of detail descript ion in shallow sedimentary layer or highly permeable layer which plays an important role on the regional flow advection and heat transfer. Also, the effect of groundwater convection increases when the arrangement of the 2 injection pipes and 2 extract ion well is maintained parallel to groundwater flow. Therefore, more careful and detail investigation is required before installation and operation of heat pump system that it may not cause any possible change of microbial ecosystem in the shallow subsurface environment or 'contamination of temperature' for groundwater use as well as the loss of efficiency of the equipment itself. This can also help to design the optimized grouting system for heat pump.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.122-130
• /
• 2018

The International Maritime Organization has enacted mandatory performance standards for protective coatings (PSPC), and as a result, shipyards must perform 2R or 3-pass milling on the edges of color plates. However, manual milling could result in many problems in terms of work environment and productivity. Therefore, it is necessary to develop an edge milling automation system that can satisfy the regulations. In this study, a basic design for an edge milling automation system was developed for standard color plates, and the machining process was established by applying shape recognition and a machining path generation algorithm. In addition, operating software was developed, and suitable milling conditions were derived based on the results of a milling test. The results could be used to build an automation system that meets the PSPC requirements and improve productivity.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.3
• /
• pp.267-282
• /
• 2008

The GNSS (Global Navigation Satellite System) signal is delayed by the neutral atmosphere at the troposphere, so that the delay is one of major error sources for GNSS precise positioning. The tropospheric delay is an integrated refractive index along the path of GNSS signal. The refractive index is empirically related to standard meteorological variables, such as pressure, temperature and water vapor partial pressure, therefore the tropospheric delay could be calculated from them. In this paper, it is presented how to generate meteorological data where observation cannot be performed. KASI(Korea Astronomy & Space Science Institute) has operated 9 GPS (Global Positioning System) permanent stations equipped with co-located MET3A, which is a meteorological sensor. Meteorological data are generated from observations of MET3A by Ordinary Kriging. To compensate a blank of observation data, simple models which consider periodic characteristics for meteorological data, are employed.

• The KIPS Transactions:PartD
• /
• v.11D no.5
• /
• pp.1021-1030
• /
• 2004

When any data-centric XML documents are stored and managed in RDBMS, schema extracting from XML Schema is an imminent problem. Furthermore, when they are stored in partitioned way on created table, lots of null values will be produced and/or be increased cost for join, so we need a solution to solve these problems. This paper proposes a Schema Hybrid Inlining technique to generate relational schema of XML documents. The suggested technique creates a relational schema based on the XML Schema graph. Also, the technique expands the legacy Inlining method by manual and heuristic processing table generation method of cardinality and in-degree. Then, an ancestor node, terminal node, and creating a new table on the derived relation in this technique. DTD-dependent storage method uses partitioned storing and relation path element information reformed structured-searching method to reduce joining operation cost that is a weak point of it.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.1
• /
• pp.12-17
• /
• 2008

In this paper, an I-V characteristics of bypass diode has been studied by counting the shading effect in photovoltaic module. The shadow induces hot spot phenomenon in PV module due to the increase of resistance in the current path. Two different types of PV module with and without bypass diode were fabricated to expect maximum output power with an increasing shading rate of 5 % on the solar cell. Temperature distribution is also detected by shading the whole solar cell for the outdoor test. From the result, the bypass diode works properly over 60 % of shading per cell with constant output power. Maximum power generation in case of solar cell being totally shaded with bypass diode decreases 41.3 % compared with the one under STC(Standard Test Condition). On the other hand, the maximum output power of the module without bypass diode gradually decreases by showing hot spot phenomenon with the increase of shading ratio on the cell and finally indicates 95.5 % of power loss compared with the output under STC. Finally the module temperature measured increases around $10^{\circ}C$ higher than that under STC due to hot-spots which come from the condition without bypass diode. It has been therefore one of the main reasons for degrading the PV module and shortening the durability of the PV system.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.345-350
• /
• 2014

According to the necessity of smart working with various mobile devices, and the increasing services based on the converged infrastructures such as Cloud, Wearable Computing, Next Generation Wired/Wireless Mobile Networks, the network reliability has been one of the most important things. However, the research related to the network reliability is still insufficient. To solve these problems, we propose the ISNTC (Intelligent Safe Network Technology based on Cloud), which uses the safe network technique based on SDN, to be adopted to the smart working environments. The proposed ISNTC guarantees secure data forwarding through the synchronized transmission path and timing. We have verified the throughput which outperformed the existing techniques through the computer simulations using OPnet.

• Journal of Digital Convergence
• /
• v.18 no.11
• /
• pp.81-86
• /
• 2020

Green consumption has drawn attention from various sectors of society recently. However, the "mismatch" of awareness and behavior remains despite consumers' heightened environment-friendly awareness. Based on the theory of emotional cognition and cognitive dissonance, This study examined the impact of consumers' expected guilt on green consumption intentions, and also introduced consumer cognitive utility to further uncover the mechanism in the process of influence by a survey of young Chinese people born after the 80s. Path analysis and hypothesis verification using AMOS showed that consumers' expected guilt not only directly affects the intention of green consumption, but also indirectly affects the intention of green consumption through the intermediation of cognitive utility.