• Food Science and Preservation
• /
• v.19 no.2
• /
• pp.257-262
• /
• 2012

pasting characteristics. Their water contents, water holding capacities, solubilities, swelling power, amylose contents, damaged starches, particle sizes and pasting characteristics were measured. The water content and water holding capacities of various types of rice flours collected in the market were 7.64-14.97% and 95.22-232.94%, respectively. Their solubilities and swelling power were 1.97-37.40% and 1.33-5.76, respectively. Various types of rice flour had 32.11-305.67 ${\mu}m$ particle sizes. Among the various types of rice flour collected in the market, the lowest starch damaged content was 3.17%. The peak viscosities of the samples were 17.74-295.95 RVA. Among the rice flours that were collected in the market, the lowest pasting temperature was $69.72^{\circ}C$. As a result, it was shown that rice flour types with high starch damage contents tend to have higher expressed water holding capacities. Moreover, the samples with lower particle sizes tended to have final viscosities, and pasting temperatures.

• Food Science and Biotechnology
• /
• v.16 no.5
• /
• pp.663-674
• /
• 2007

Starches from different botanical sources differ in the ratio of amylose to amylopectin contents, molecular structures of amylose and amylopectin, granule morphology, and minor-component contents. These structural features result in different gelatinization, pasting, retrogradation properties, and enzyme digestibility of starch granules. In this review, compositions and molecular structures of starches and their effects on the physicochemical properties are summarized and discussed.

• Journal for History of Mathematics
• /
• v.12 no.2
• /
• pp.25-39
• /
• 1999

In Euclidean plane geometry, areas of polygons can be computed through a finite process of cutting and pasting. The Hilbert's third problem is that a theory of volume can not be based on the idea of cutting and pasting. This problem was solved by Dehn a few months after it was posed. The purpose of this article is not only to study Hilbert's third Problem and its proof but also to provide basis for the secondary school mathematics.

• Food Science and Biotechnology
• /
• v.17 no.1
• /
• pp.52-57
• /
• 2008

The effects of transglutaminase (TG) on the pasting and rheological properties of different wheat cultivars ('Sharpshooter', 'Russ', and 'AcAriss') blended with barley (40%) or soy (20%) flour were investigated. In the rapid visco-analyzer (RVA) pasting profile, the addition of barley or soy flour to wheat flour samples induced a decrease in peak, trough, final viscosity, breakdown and setback values. However, TG treatment of these blends significantly increased peak viscosity and breakdown (p<0.05). In particular, TG treatment greatly increased the breakdown of wheat flour blended with soy flour, indicating that the cross-linking of proteins through TG may somehow be related to an increase in starch granule rupturing in pastes. Storage (G') and loss (G") moduli of the sample pastes increased with an increase in frequency ($\omega$), while complex viscosity (${\eta}*$) decreased. In all wheat cultivars, G', G", and $\eta$ were decreased by the addition of barley or soy flour, or TG treatment. Results suggest that protein cross-linking by TG can produce unique and improved properties in wheat flours blended with barley or soy flour.

• Korean journal of food and cookery science
• /
• v.27 no.2
• /
• pp.19-29
• /
• 2011

Sweet potato powders made from eight Korean varieties, including purple-fleshed, orange-fleshed, and commercial dry type sweet potatoes, were investigated for physicochemical and pasting properties to develop processed food. Crude protein and lipid contents of Shinjami and Borami were higher than those of other varieties. The lightness value of raw sweet potato flesh was the highest value in Shinchunmi, and the lowest in Shinjami. Using the color difference (${\Delta}E$), color similarities compared to the white plate occurred in the following order; purple-fleshed > orange-fleshed > commercial dry type sweet potatoes. Total and damaged starch contents were significantly different (p<0.05). Total starch content of sweet potatoes was higher in commercial dry sweet potatoes (61.89-70.46%), particularly Shinchunmi (70.46%) but lower in orange-fleshed sweet potato (48.87 and 49.53%, respectively). Water binding capacity of Yeonwhangmi, swelling power and solubility of Shinyulmi were the highest values (174.70, 25.54 and 87.49%, respectively) among them (p<0.05). But oil absorptions of Shinyulmi and Shinchunmi showed lower values (97.08 and 97.54%, respectively). All sweet potato powders had an A type x-ray diffraction pattern. The initial pasting temperatures of sweet potato powders ranged from 69.50 to $75.95^{\circ}C$ and the amylolytic enzyme in sweet potato powder lowered pasting viscosity.

• Food Science and Biotechnology
• /
• v.18 no.4
• /
• pp.855-860
• /
• 2009

Physicochemical properties of starches isolated from 3 new potato cultivars developed by Potato Valley Ltd. were investigated and compared to those of starch isolated from 'Superior' being distributed prominently in Korea. Significant differences were observed in physicochemical properties such as granule size, amylose content, phosphorus content, water binding capacity, swelling power, solubility, and in vitro digestibility of starches from different potato cultivars. Thermal properties were evaluated using differential scanning calorimetry (DSC), and onset gelatinization temperatire ($T_o$), peak temperature ($T_p$), and enthalpies of gelatinization (${\triangle}H$) of different potato cultivars ranged as $58.0{\pm}0.3-61.7{\pm}0.4^{\circ}C,\;63.7{\pm}0.2-$ $66.5{\pm}0.0^{\circ}C$, and $15.6{\pm}0.5-17.0{\pm}0.3$ J/g, respectively. Pasting properties were evaluated using a rapid visco analyzer (RVA), and pasting temperature, peak viscosity, and final viscosity of different potato cultivars ranged as $65.0{\pm}0.1-68.9{\pm}0.1^{\circ}C$, $8,163.7{\pm}196.3-9,035.7{\pm}6.4$ cp, and $4,397.7{\pm}166.7-7,025.0{\pm}271.3$ cp, respectively. Especially, 'Gogu valley' starch showed the highest values in the amylose and phosphorus content among tested potato cultivars and higher water binding capacity, swelling power, and solubility than those of other tested starches. And it also showed high pasting temperature, peak viscosity, trough viscosity, and final viscosity as compared to other tested starches.

• Food Science and Biotechnology
• /
• v.15 no.2
• /
• pp.207-213
• /
• 2006

The effects of gellan gum (from S. paucimobilis), EPS-CB (exopolysaccharide from S. chungbukensis), and a series of commercial gums (arabic gum, xanthan gum, guar gum, deacyl gellan gum), on the swelling, rheological, and pasting properties of non-waxy rice flour dispersions were investigated. The swelling properties of rice flours in gellan or guar gum dispersion after heating were found to have increased with increasing gum concentrations, but the swelling properties of rice flour/other gum systems decreased with increasing concentrations. The rice flour/gum mixtures showed high shear-thinning flow behavior (n=0.14-0.32), and consistency index (K) was higher in guar gum than other gum dispersions. The initial pasting temperatures and peak times increased along with increasing gum concentration. The peak viscosity of rice flour increased in guar gum and deacyl gellan dispersions, and the breakdown and setback viscosity of the rice flour paste was lowest in the xanthan gum system, but remained higher than those of the control. The apparent viscosities of the rice flour/gellan gum mixture pastes were the highest among the tested combinations.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.260-266
• /
• 2013

The study was carried out to determine the gel pasting properties of barley (Hordeum vulgare L. cv. Geoncheonheugbori) as affected by different proton beam irradiation. The ${\lambda}max$, blue value, and amylose content were significantly associated with increasing proton beam irradiation. The pasting time in barley flour irradiated with proton beam ranged 0.09 to 0.16 min shorter than nonirradiated barley flour. Gel pasting temperature ranged 57.4 to $60.5^{\circ}C$. Gel pasting temperature in barley flour decreased with increasing proton beam irradiation. Proton beam irradiation caused a significant decrease in the onset temperature (To), peak temperature (Tp), conclusion temperature (Tc) and enthalpy change (${\Delta}H$). Gelatinization range (R) in barley starch was more broaden than that of non-irradiated barley starch. Barley starches gave the strong diffraction peak at around $2{\Theta}$ values$15^{\circ}$, $18^{\circ}$, $20^{\circ}$, and $23^{\circ}$ $2{\Theta}$. Peak intensity tended to increase with increased proton beam irradiation. The granule crystallinity is closely associated with decreased amylose and increased amylopectin component. The crystallinity degree of barley starch irradiated with proton beam was significantly increased and it ranged from 24.9 to 32.9% compared to the non-irradiated barley starches. It might be deduced that proton beam irradiation causes significant changes of properties of starch viscosity in rice, especially at high irradiation of proton beam.

• Korean journal of food and cookery science
• /
• v.33 no.3
• /
• pp.292-299
• /
• 2017

Purpose: The present study explored cookie making performance using Jeju magma seawater to elucidate the effects of minerals in water on quality of baked goods. Methods: Seven water samples were analyzed for their mineral content, pH and water hardness. Starch pasting properties of flour in water samples was analyzed using RVA, and cookie making performance using water samples was evaluated with the AACCI wire-cut cookie baking method. Quality of cookies was measured by weight loss during baking, cookie geometry, color, and firmness. Results: Hardness of water samples ranged from 0-4200, and mineral content was in the order of magma seawater > 100% ED mineral water > 50% ED mineral water > 10% ED mineral water > tap water > Samdasoo > distilled water. RVA results showed that water hardness exhibited significant relationships with pasting temperature (p<0.05, R=0.863), peak viscosity (p<0.001, R=0.944), final viscosity (p<0.05, R=0.861), and setback (p<0.05, R=0.782). Cookie baking results showed that cookie diameter increased in the order of magma seawater < 100% ED mineral water < 50% ED mineral water < 10% ED mineral water $\approx$ tap water < Samdasoo < distilled water. Conclusion: As mineral content in water increased, flour pasting temperature and viscosity increased, whereas cookie diameter decreased with color fading. However, cookies formulated with 50% ED mineral water showed similar cookie geometry and texture to those with tap water. Therefore, controlling the mineral content of water can be successfully applied to produce mineral-enriched cookies.

• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.149-153
• /
• 2005

Composition and pasting properties of endosperms of one common buckwheat (CB) and two tartary buckwheats (TB) grown in China were investigated. No differences were observed in proximate composition and amino acid content between CB and TB. Content of rutin in TB was 22-fold higher than that of CB. Among minerals, iron, calcium, and magnesium contents were higher in TB than CB, whereas zinc, manganese, and phosphorus contents were similar, Pasting properties measured with Rapid visco Analyzer revealed TB-2 cultivar had highest peak viscosity, trough, and breakdown, followed by TB-1 and CB. Setback of TB was about 2.2-fold greater than that of CB. Significant differences in color were observed between CB and TB, and among TB cultivars.