• 한국재료학회지
• /
• 제6권12호
• /
• pp.1270-1278
• /
• 1996

고진공하에서 벽개된 GaAs를 대기중 노출시킨후, 결합상태 및 조성의 변화를 정량적으로 연구하여 Ga의 우선적 산화경향 및 결합의 붕괴에 기인한 원소상태 Ga 및 As의 생성을 관찰하였다. 대기중 노출시, 초기 Ga/As 비(=0.01)는 Ga의 우선적 산화에 의해 증가하였으며 원소상태 As의 증가와 더불어 일정값(=1.25)으로 유지되었다. 습식세정된 GaAs와 유황처리된 (S-passivated)GaAs를 각각 대기중에 노출시켜, 각각의 표면상태 변화를 비교, 관찰하였다. 유황처리된 GaAs는 습식세정처리만한 GaAs에 비해 산화막 성장이 크게 억제되었고, 이는 (NH4)2Sx 용액 처리로 형성된 Ga-S 및 As-S 겹합의 표면보호 효과에 기인한 것이다. 특히 대기중 노출에 따른 유황처리된 GaAs 표면조성 및 결합상태 변화의 정량적 관찰을 통하여, 유황보호막(S-passivation layer) 및 GaAs 표면과 대기중 산소와의 반응 기구를 규명할 수 있었다. 대기중 노출에 따라, 표면의 Ga-S 및 As-S 결합은 대기중 산소와 반응하여 점차 붕괴, 감소하는 경향을 나타냈으며, 이와 동시에 unpassivated 상태의 GaAs가 산소와 반응하여 Ga-O 결합을 형성함을 관찰할 수 있었다. 본 연구에서는 X-선 광전자 분광기를 사용하여 GaAs 표면 조성 및 결합상태의 변화를 관찰하였다.

• 한국분말재료학회지
• /
• 제23권2호
• /
• pp.91-94
• /
• 2016

High-quality colloidal CdSe/ZnS (core/shell) is synthesized using a continuous microreactor. The particle size of the synthesized quantum dots (QDs) is a function of the precursor flow rate; as the precursor flow rate increases, the size of the QDs decreases and the band gap energy increases. The photoluminescence properties are found to depend strongly on the flow rate of the CdSe precursor owing to the change in the core size. In addition, a gradual shift in the maximum luminescent wave (${\lambda}_{max}$) to shorter wavelengths (blue shift) is found owing to the decrease in the QD size in accordance with the quantum confinement effect. The ZnS shell decreases the surface defect concentration of CdSe. It also lowers the thermal energy dissipation by increasing the concentration of recombination. Thus, a relatively high emission and quantum yield occur because of an increase in the optical energy emitted at equal concentration. In addition, the maximum quantum yield is derived for process conditions of 0.35 ml/min and is related to the optimum thickness of the shell material.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.55-55
• /
• 2018

Recently, amorphous oxides such as InGaZnO (IGZO) and InZnO (IZO) as a channel layer of an oxide TFT have been attracted by advantages such as high mobility, good uniformity, and high transparency. In order to apply such an amorphous oxide TFTs to a display, the stability in various environments must be ensured. In the InGaZnO which has been studied in the past, Ga elements act as a suppressor of oxygen vacancy and result in a decreased mobility at the same time. Previous studies have been showed that the InZnO, which does not contain Ga, can achieve high mobility, but has relatively poor stability under various instability environments. In this study, the TFTs using $IZO/Al_2O_3$ double layer structure were studied. The introduction of an $Al_2O_3$ interlayer between source/drain and channel causes superior electrical characteristics and electrical stability as well as reduced contact resistance with optimally perfect ohmic contact. For the IZO and $Al_2O_3$ bilayer structures, the IZO 30nm IZO channels were prepared at $Ar:O_2=30:1$ by sputtering and the $Al_2O_3$ interlayer were depostied with various thickness by ALD at $150^{\circ}C$. The optimal sample exhibits considerably good TFT performance with $V_{th}$ of -3.3V and field effect mobility of $19.25cm^2/Vs$, and reduced $V_{th}$ shift under positive bias stress stability, compared to conventional IZO TFT. The enhanced TFT performances are closely related to the nice ohmic contact properties coming from the defect passivation of the IZO surface inducing charge traps, and we will provide the detail mechanism and model via electrical analysis and transmission line method.

• 한국전기전자재료학회논문지
• /
• 제16권12S호
• /
• pp.1187-1194
• /
• 2003

A BCl$_3$/Ne plasma chemistry was used to etch Ga-based (GaAs, AIGaAs, GaSb) and In-based (InGaP, InP, InAs and InGaAsP) compound semiconductors in a Planar Inductively Coupled Plasma (ICP) reactor. The addition of the Ne instead of Ar can minimize electrical and optical damage during dry etching of III-V semiconductors due to its light mass compared to that of Ar All of the materials exhibited a maximum etch rate at BCl$_3$ to Ne ratios of 0.25-0.5. Under all conditions, the Ga-based materials etched at significantly higher rates than the In-based materials, due to relatively high volatilities of their trichloride etch products (boiling point CaCl$_3$ : 201 $^{\circ}C$, AsCl$_3$ : 130 $^{\circ}C$, PCl$_3$: 76 $^{\circ}C$) compared to InCl$_3$ (boiling point : 600 $^{\circ}C$). We obtained low root-mean-square(RMS) roughness of the etched sulfate of both AIGaAs and GaAs, which is quite comparable to the unetched control samples. Excellent etch anisotropy ( > 85$^{\circ}$) of the GaAs and AIGaAs in our PICP BCl$_3$/Ne etching relies on some degree of sidewall passivation by redeposition of etch products and photoresist from the mask. However, the surfaces of In-based materials are somewhat degraded during the BCl$_3$/Ne etching due to the low volatility of InCl$_{x}$./.

• 한국세라믹학회지
• /
• 제40권1호
• /
• pp.77-80
• /
• 2003

수용액 내에서 질화물 박막의 산화저항성 흡착 피막의 형성을 확인하기 위하여 Si$_3$N$_4$분말 표면의 glycine 흡착 거동을 조사하였다. 염기성분위기에서 glycine은 Si$_3$N$_4$ 분말 표면에 포화 흡착되었으며 이러한 흡착거동은 Si$_3$N$_4$ 박막의 경우에도 동일하게 일어날 것으로 예상되었다. Glycine을 첨가한 CeO$_2$ 슬러리를 제조하고 PH에 따른 Si$_3$N$_4$와 SiO$_2$ 박막의 연마시험을 수행하여 연마율은 감소하고 선택비는 증가하는 것을 확인하였다. 실험에서 얻은 최대 선택비는 pH=12에서 35 이상이었다. 이는 염기성 분위기에서 glycine이 해리하여 막 표면에 화학흡착하고 산화와 용해를 억제함으로써 연마율을 낮추고 선택비 향상에 기여하였기 때문으로 판단된다. 아미노산 계열의 첨가제를 CeO$_2$계 CMP용 슬러리에 적용하는 경우 산화물/질화물 박막의 선택비를 향상시키는데 효과적임을 확인하였다.

• 한국태양에너지학회 논문집
• /
• 제33권2호
• /
• pp.11-17
• /
• 2013

Silicon nitride($SiN_x:H$) deposited by radio frequency plasma enhanced chemical vapor deposition(RF-PECVD) is commonly used for anti-reflection coating and passivation in crystalline silicon solar cell fabrication. In this paper, characteristics of the deposited silicon nitride was studied with change of working pressure, deposition temperature, gas ratio of $NH_3$ and $SiH_4$, and RF power during deposition. The deposition rate, refractive index and effective lifetime were analyzed. The (100) p-type silicon wafers with one-side polished, $660-690{\mu}m$, and resistivity $1-10{\Omega}{\cdot}cm$ were used. As a result, when the working pressure increased, the deposition rate of SiNx was increased while the effective life time for the $SiN_x$-deposited wafer was decreased. The result regarding deposition temperature, gas ratio and RF power changes would be explained in detail below. In this paper, the optimized condition in silicon nitride deposition for silicon solar cell was obtained as 1.0 Torr for the working pressure, $400^{\circ}C$ for deposition temperature, 500 W for RF power and 0.88 for $NH_3/SiH_4$ gas ratio. The silicon nitride layer deposited in this condition showed the effective life time of > $1400{\mu}s$ and the surface recombination rate of 25 cm/s. The crystalline silicon solar cell fabricated with this SiNx coating showed 18.1% conversion efficiency.

• 대한화학회지
• /
• 제60권3호
• /
• pp.169-176
• /
• 2016

Borate 완충용액에서 Al의 부식과 부동화에 관하여 변전위법, 대 시간 전류법 그리고 다중 주파수 전기화학적 임피던스 측정법으로 조사하였다. 공기 또는 산소의 영향은 환원과정에 영향을 주었지만 산화반응에는 영향을 미치지 못 하는 것으로 보인다. 부동화 영역에서 생성되는 피막의 전기적 성질은 Mott-Schottky 식이 적용되는 n-type 반도체 성질을 보였다. 낮은 전극전위에서 생성되는 Al의 산화피막은 Al(OH)₃로 충분한 부동화 효과를 보이지 못하나, 전극전위가 증가하면서 Al₂O₃로 변하였다. Al₂O₃ 피막은 “전기장에 의한-이온의 이동” 과정에 의하여 성장하는 것으로 보인다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.472-472
• /
• 2011

The capacitive coupled plasma (CCP) has been extensively used in the semiconductor industry because it has not only good uniformity, but also low electron temperature. But CCP source has some problems, such as difficulty in varying the ion bombardment energy separately, low plasma density, and high processing pressure, etc. In this reason, dual frequency CCP has been investigated with a separate substrate biasing to control the plasma parameters and to obtain high etch rate with high etch selectivity. Especially, in this study, we studied on the etching of $SiO_2$ by using the pulse-time modulation in the dual-frequency CCP source composed of 60 MHz/ 2 MHz rf power. By using the combination of high /low rf powers, the differences in the gas dissociation, plasma density, and etch characteristics were investigated. Also, as the size of the semiconductor device is decreased to nano-scale, the etching of contact hole which has nano-scale higher aspect ratio is required. For the nano-scale contact hole etching by using continuous plasma, several etch problems such as bowing, sidewall taper, twist, mask faceting, erosion, distortions etc. occurs. To resolve these problems, etching in low process pressure, more sidewall passivation by using fluorocarbon-based plasma with high carbon ratio, low temperature processing, charge effect breaking, power modulation are needed. Therefore, in this study, to resolve these problems, we used the pulse-time modulated dual-frequency CCP system. Pulse plasma is generated by periodical turning the RF power On and Off state. We measured the etch rate, etch selectivity and etch profile by using a step profilometer and SEM. Also the X-ray photoelectron spectroscopic analysis on the surfaces etched by different duty ratio conditions correlate with the results above.

• Journal of the Optical Society of Korea
• /
• 제9권1호
• /
• pp.16-21
• /
• 2005

Using a cantilever type nanoprobe having a 100㎚m aperture at the apex of the pyramidal tip of a near-field scanning optical microscope (NSOM), nanopatterning of polymer films are conducted. Two different types of polymer, namely a positive photoresist (DPR-i5500) and an azopolymer (Poly disperse orange-3), spincoated on a silicon wafer are used as the substrate. A He-Cd laser with a wavelength of 442㎚ is employed as the illumination source. The optical near-field produced at the tip of the nanoprobe induces a photochemical reaction on the irradiated region, leading to the fabrication of nanostructures below the diffraction limit of the laser light. By controlling the process parameters properly, nanopatterns as small as 100㎚ are produced on both the photoresist and azopolymer samples. The shape and size variations of the nanopatterns are examined with respect to the key process parameters such as laser beam power, irradiation time or scanning speed of the probe, operation modes of the NSOM (DC and AC modes), etc. The characteristic features during the fabrication of ordered structures such as dot or line arrays using NSOM lithography are investigated. Not only the direct writing of nano array structures on the polymer films but also the fabrication of NSOM-written patterns on the silicon substrate were investigated by introducing a passivation layer over the silicon surface. Possible application of thereby developed NSOM lithography technology to the fabrication of data storage is discussed.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.569-574
• /
• 2014

Inverted bulk hetero-junction polymer solar cells (iPSC) composed of P3HT/PC61BM blends on the ZnO modified with benzoic acid derivatives-based self-assembled monolayers (SAM) are fabricated. Compared with the device using the pristine ZnO, the devices with ZnO surface modified SAMs derived from benzoic acid such as 4-(diphenylamino)benzoic acid (DPA-BA) and 4-(9H-carbazol-9-yl)benzoic acid (Cz-BA) as an electron transporting layer show improved the performances. It is mainly attributed to the favorable interface dipole at the interface between ZnO and the active layer, the eective passivation of the ZnO surface traps, decrease of the work function and facilitating transport of electron from PCBM to ITO electrode. The power conversion eciency (PCE) of iPSCs based on DPA-BA and Cz-BA treated ZnO reaches 2.78 and 2.88%, respectively, while the PCE of the device based on untreated ZnO is 2.49%. The open circuit voltage values ($V_{oc}$) of the devices with bare ZnO and SAM treated ZnO are not much different. Whereas, higher the fill factor (FF) and lower the series resistance ($R_s$) are obtained in the devices with SAMs modification.