• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.564-569
• /
• 2013

An accurate railway environmental noise prediction model is required to make the proper solution of the railway noise problems. In this paper, an engineering model for predicting the noise of conventional passenger cars is presented considering the acoustic source strength in octave-band frequencies and the propagation over grounds with varying surface properties. Since the formation of a train can be variable, the source strength of each locomotive and passenger car was estimated by measuring the pass-by noise and analysing the wheel-rail rolling noise. Some validation cases show on the average small differences between the predictions of the present model and the measurement results.

• 한국도로학회논문집
• /
• 제13권2호
• /
• pp.67-75
• /
• 2011

고속도로 이용차량의 증가와 함께 차량의 대형화와 고속화로 인해 고속도로 교통 소음레벨이 높아지고 있으며 저소음 포장노면 및 방음시설 설치 요청도 급격하게 증가하고 있다. 따라서 고속도로 교통소음으로 인한 민원예방과 함께 효율적이고 경제적인 소음저감 대책을 수립하기 위해서는 정확한 소음 예측 기술 마련이 필요하다. 본 연구에서는 시험도로에 포설된 다양한 포장노면에 대해서 CPX(Close Proximity Test) 및 Pass-by 소음 계측 방법을 혼용한 소음 계측 데이터를 이용하였고 차종별 단독 주행 시험을 실시하여 차량 및 노면별 음향파워레벨 산정식이 마련된 데이터를 이용하였다. 아울러, 상기 산정식의 정확성을 검증하기 위하여 고속도로 12개 지점에 대한 총 38회의 소음 계측한 데이터를 이용하여 해당 지점에 대한 소음 예측 모델을 구성하여 측정값과 예측값을 비교 평가하였다. 최종적으로 3차원 GUI 기능을 지원하는 도로교통 소음 예측 프로그램 KRON(Korea Road Noise)을 개발하였다. 이와 더불어 각 포장형태별 및 차종별에 따른 소음특성을 분석하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.629-634
• /
• 2001

The construction of the elevated railway has led to concerns about the noise from trains, particularly as tracks often pass close to residential dwellings. One specific issue relates to the noise from trains on bridges. The wayside noise for the train was measured to get the basic data that can be used to prepare count measures for solving environmental noise problems. Noise levels were measured simultaneously at three points in various distances from the railroad and at four points classified by floor. In this paper we measure the wayside noise in elevated railway and noise of normal operation compare with operating under train engine idling condition and investigate effect of nearby-building induced by train operation.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권8호
• /
• pp.394-400
• /
• 2001

This paper describes an application of the on line partial discharge measurement method in operating transformer. In the operating transformer, the partial discharge signal may be superimposed by radio intereference voltage(RIV) and pulse shaped noise signals generated by external corona. The partial discharge quantity showed about 3,800pC due to very high sinusoidal interferences at the measuring impedance terminal of the transformer bushing tap. In order to reject these noises, this paper applied RIV filter, band-pass filters and noise gating method. The resulting measuring sensitivity was improved from 3,800pC to 160pC.

• 한국소음진동공학회논문집
• /
• 제20권5호
• /
• pp.437-443
• /
• 2010

SAW device is widely used as band pass filters, chemical or physical sensors, and actuators. In this paper, we propose the capacitive gap measurement system with high precision using SAW device. The research process is mainly composed of theoretical and experimental part. In the theoretical part, equivalent circuit model was used to predict the SAW response by the change of load impedance. In the experimental part, commercialized capacitor was used to see the SAW response by the change of load capacitance to check the feasibility as a sensor unit. After that, experimental setup to measure and adjust the gap was made and the SAW response by the change of gap which caused the capacitance change was measured. Finally, resolution and stroke was decided compared with the signal change and basic measurement noise level.

• 수산해양기술연구
• /
• 제30권2호
• /
• pp.125-131
• /
• 1994

This paper describes a method to measure the distortion level of loudspeaker using a LMS(Least Mean Square) adaptive filter. Conventional technique to measure the distortion level uses a band-pass filter with a sharp cut-off frequency characteristics. However. such the band-pass filter has a bed time response characteristics. On the other hand, the proposed method offers us an easy way to measure the specified harmonic distortion level with a small hardware. Moreover, our method is not affected by noise which has no correlation with the test signal, and the measurement can be carried out in a noisy environment. The effectiveness of the proposed method is confirmed by experiment using a loudspeaker in a noisy room.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.362-367
• /
• 2010

This paper deals with the correlation between the interior noise and the floor vibration of the train from rolling, impulse and friction in Busan Metro line 3. The correlation is verified by sound and vibration measurement causing friction between the railway and the wheel. If ANC(Active Noise Control) system can reduce 5 dB in below 500 Hz, the sound pressure level of the whole band pass can be reduced about 1.8-4.8 dB in squeal noise. Curve squeal noise is the intense high frequency tonal that can occur when a railway vehicle transverses a curve. The frequency range is from around 500 to almost 20,000 Hz, with noise levels up to about 15 dB in curve.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.783-787
• /
• 2007

Nowadays, vehicle becoming necessity is increasing gradually and is main cause of environmental problem. The current automobile noise measurement test method such as ISO 362 which have been used many countries contribute seriously to enforce the regulation of the noise rigidly and actively study vehicle's noise, using that method. However, the amendment of ISO 362 was completed under the international agreement due to the changes in vehicle's techniques and road conditions. In this study, the difference between the current ISO 362(or ECE R51) and new ISO 362(or new ECE R51) is estimated by the test using the practical car producing domestically because the Korean manufacturer have to be interested in new test method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.763-766
• /
• 2006

The principal of a Maglev train is that floats on a magnetic field and is propelled by a linear induction motor. One of advantages is that it generates less noise compared to the wheel-on-rail train, because there are no wheels running along the rail. However, noises due to aero-dynamic disturbance and electrical system such as VVVF inverter and SLIM still occur. In this study, the Maglev cabin noises are measured during running and zero speed conditions. Pass-by noise measurements are performed to obtain outside noise during the operation of the train on the test tract. Data include a single microphone measurement as well as microphone array measurements. The array data are useful for sound source localization and more detailed noise reduction planning.

• 한국소음진동공학회논문집
• /
• 제25권12호
• /
• pp.843-855
• /
• 2015

This study developed a band-pass filter based artificial filter bank(BAFB) based on that in order to efficiently obtain the significant dynamic responses. The BAFB was then optimized about the El-centro earthquake wave which was often used in the construction research, and the software implementation of BAFB was finally embedded in the wireless unified management system(WiUMS). For the evaluation of the developed BAFB, a real time dynamic response experiment was performed on a cable-stayed bridge model, and the response of the cable-stayed bridge model was measured using both the traditional wired system and the developed BAFB-based WiUMS. The experiment results showed that the compressed dynamic response acquired by the BAFB-based WiUMS matched significantly with that of the traditional wired system while still carrying sufficient modal information of the cable-stayed bridge. Finally, the developed BAFB was able to reconstruct or re-sample the dynamic response wholly from the compressed response signal, and it can be applied as a new kind of measurement system for a wireless sensor networks based structural health monitoring system that secures both economy and efficiency.