• Journal of Biosystems Engineering
• /
• v.29 no.6 s.107
• /
• pp.544-552
• /
• 2004

This study was conducted to suggest the efficient gathering and recycling method of disused agricultural machinery in rural environment. In order to suggest this methods, the keeping means, maintenance, disused period and kinds of agricultural machinery were investigated. The results obtained in this study were as follows : The disused agricultural machinery have been leaved on the vacant lot of a farmhouse and an around field for $2\~5\;years$. The leaving reason of the disused agricultural machinery was low interesting and gathering price for the disused agricultural machinery. The present situation for recycling method was using as a scrap iron, however to increase recycling percent the disassembling process has to divide as using and parts concretely. And the design of agricultural machinery was considered the easiness of a disassemble and assemble the agricultural machinery. To manage and supply efficiently for the second-hand parts of agricultural machinery need to the establishment of circulation information center and internet site for the parts.

• Health Policy and Management
• /
• v.27 no.1
• /
• pp.88-94
• /
• 2017

The aim of this study was to investigate the current and trend of healthcare status of South Korea compared to Organization for Economic Cooperation and Development (OECD) countries. We used the position value for relative comparison (PARC) method for measuring the healthcare status of South Korea by five parts of healthcare policy (demand, supply, accessibility, quality, and cost). Additionally, we conducted Mann-Kendall test for analyzing the trend of PARC from 2000 to the present. Demand, supply, accessibility, and quality of healthcare of Korea were located upon the average of OECD countries, and showed an increasing trend from 2000 to the present. However, primary care and screening for cervical cancer were placed at a lower level compared the OECD average. In conclusion, the current state of healthcare in Korea seems to be generally beyond the average among OECD countries. However, some parts, including primary care, need to be improved.

• Industrial Engineering and Management Systems
• /
• v.6 no.2
• /
• pp.136-145
• /
• 2007

The selection of suppliers and the determination of order quantities to be placed with those suppliers are important decisions in a supply chain. In this research, a non-linear mixed integer programming model is presented to select suppliers and determine the order quantities. The model considers the purchasing cost which takes into account quantity discount, the cost of transportation, the fixed cost for establishing suppliers, the cost for holding inventory, and the cost of receiving poor quality parts. The capacity constraints for suppliers, quality and lead-time requirements for the parts are also taken into account in the model. Since the purchasing cost, which is a decreasing step function of order quantities, introduces discontinuities to the non-linear objective function, it is not easy to employ traditional optimization methods. Thus, a heuristic algorithm, called particle swarm optimization (PSO), is used to find the (near) optimal solution. However, PSO usually generates initial solutions randomly. To improve the PSO solution quality, a heuristic procedure is proposed to find an initial solution based on the average unit cost including transportation, purchasing, inventory, and poor quality part cost. The results show that PSO with the proposed initial solution heuristic provides better solutions than those with PSO algorithm only.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.3
• /
• pp.26-31
• /
• 2006

Through the KOMPSAT program, Koreanization of thruster have been carried out successfully, but there are still many difficulties in Koreanization of most core parts of propulsion system. Because the development of core parts is essential to participate in the advanced nations, KARI has carried out development of Fill/Drain valve for propellant/pressurant supply of satellite, which has high possibilities to be koreanized, with Hanwha Corp.. This paper summarizes overall processes of development including design, manufacturing and test, and finally 4 sets of modules were successfully made. Also the satisfaction of performance requirements are verified through performance tests.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.195-201
• /
• 2020

COVID-19 is hitting the world. In order to bring about new ways of innovation in the space sector, we need to analyze changes in the space sector and design new challenge strategies. COVID-19 exposes inherent vulnerabilities in the space sector. In particular, COVID-19 is causing supply chain shocks in the space industry, resulting in delays in the supply of systems, subsystems and parts due to a complete or partial interruption of a manufacturing unit. As the overall impact of New Normal on the industry is overall, we continue to look at it in the space sector. COVID is causing supply chain shock in the space industry. It causes a delay in the supply of systems, subsystems and parts due to a complete or partial interruption of a manufacturing unit. In the supply of launch services, the launch schedule is being delayed, but the main launch is still taking place. Demand for major applications such as environmental monitoring is soaring in the earth observation utilization sector. Analyzing the impact on manufacturing, the vendor-based contraction is bringing delays in the supply of systems, subsystems and components, and launch service providers are trying to minimize delays in the launch schedule.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.403-408
• /
• 2008

The gyroscope is the sensor for detecting the rotation in inertial reference frame and constitute the navigation system together an accelerometer. As the inertial reference equipment for attitude determination and control in the satellite, the mechanical gyroscope has been used but it bring the disturbance for mass unbalance so the disturbance give a bad influence to the observation satellite mission because the mechanical gyroscope has the rotation parts. During the launch. The mechanical gyroscope is weak in vibration, shock and has the defect of narrow operating temperature range so it need the special design in integration. Recently the low orbit observation satellite for seeking the high pointing accuracy of image camera payload accept the FOG(Fiber Optic Gyro) or RLG(Ring Laser Gyro) for the attitude determination and control. The Ring Laser Gyro makes use of the Sanac effect within a resonant ring cavity of a He-Ne laser and has more accuracy than the other gyros. It need the 1000V DC to create the He-Ne plasma in discharge tube. In this paper, the design process of the High Voltage Power Supply for RLG(Ring Laser Gyroscope) is described. The specification for High Voltage Power Supply (HVPS) is proposed. Also, The analysis of flyback converter topology is explained. The Design for the HVPS is composed of the inverter circuit, feedback control circuit, high frequency switching transformer design and voltage doubler circuit.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.337-339
• /
• 1998

This paper deals with the design and fabrication of a novel superconducting power supply system, and characteristics have been analyzed through experiments. Superconducting power supply consists of rotating and static parts, and superconducting magnet. In this experiment, the current-pumping characteristics have been analyzed with superconducting sheets placed in parallel within the static part of the machine. In addition, in order to observe the 3-dimensional flux distribution in the superconducting sheet, several hall-sensors were placed in it. With the flux distribution acquired, the effect of the flux on the superconducting sheet during the process of current pumping have been analyzed. Also, general operational characteristics of the superconducting power supply system have been investigated on the basis of the current and voltage data and magnetic field values acquired through the experiments. In this experiment, maximum pumping current has been achieved to about 1280 amps.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.244-246
• /
• 1999

This paper deals with the design and fabrication of a novel superconducting power supply system, and characteristics have been analyzed through experiments. Superconducting power supply consists of rotating and static parts, and superconducting magnet. In this experiment, the current pumping characteristics have been analyzed with superconducting sheets placed in parallel within the static part of the machine. In addition, in order to observe the rotating flux distribution in the superconducting sheet, several hall-sensors were placed in it. With the flux distribution acquired, the effect of the flux on the superconducting sheet during the process of current pumping have been analyzed. Also, general operational characteristics of the superconducting power supply system have been investigated on the basis of the current and voltage data, and magnetic field values acquired through the experiments.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.195-199
• /
• 2015

Many conventional management methods have emphasized the minimization of required resources along the supply chain. Accordingly, this paper presents a proposed method called the Virtual Design and Construction (VDC)-aided system. It is based on object-oriented resource control, in order to accomplish a feed-forward control monitoring supply chain logistics. The system is supported by two main parts: (1) IT-based Technologies; and (2) VDC Models. They enable the system to convey proactive information from the detection technology to its linked visualization. The paper includes a field study as the system's pre-test: the Scaffolding Works in a LNG Mega Project. The study demonstrates a system of real-time productivity monitoring by use of the RFIDbased Mobile Information Hub. The on-line 'productivity dashboard' provides an opportunity to display the continuing processes for each work-package. This research project offers the observed opportunities created by the developed system. Future work will entail research experiments aimed towards system validation.

• Journal of the Korean Geographical Society
• /
• v.40 no.5 s.110
• /
• pp.533-552
• /
• 2005

Human capital and higher education have been increasingly emphasized with the rise of a knowledge-based economy. Cities are recognized as places to attract human capital and spur economic development. Educated workforce supply is one of the critical parts to sustain IT industries, which have been leading recent economic development. This paper examines factors affecting geographies of educated workforce supply from colleges and universities to companies in U.S. metropolitan areas through questionnaire survey and interviews with IT companies and IT-related programs at colleges and universities. The results show that: (1) physical proximity between IT companies and colleges/universities enhances the degree of educated workforce supply from colleges/universities to IT companies; (2) IT companies which seek more specialized and rarer expertise recruit the workforce from colleges or universities over longer distance; (3) colleges and universities which offer a higher degree have geographically more extensive supply of educated workforce to IT companies than those which offer a lower degree; and (4) large IT companies have more geographically extensive supply of educated workforce to colleges/universities than small IT companies.