저궤도 위성 자세제어용 자이로 고전압 발생기 설계

The Gyro High Voltage Power Supply Design for Attitude Control in the Satellite

  • 발행 : 2008.03.01

초록

The gyroscope is the sensor for detecting the rotation in inertial reference frame and constitute the navigation system together an accelerometer. As the inertial reference equipment for attitude determination and control in the satellite, the mechanical gyroscope has been used but it bring the disturbance for mass unbalance so the disturbance give a bad influence to the observation satellite mission because the mechanical gyroscope has the rotation parts. During the launch. The mechanical gyroscope is weak in vibration, shock and has the defect of narrow operating temperature range so it need the special design in integration. Recently the low orbit observation satellite for seeking the high pointing accuracy of image camera payload accept the FOG(Fiber Optic Gyro) or RLG(Ring Laser Gyro) for the attitude determination and control. The Ring Laser Gyro makes use of the Sanac effect within a resonant ring cavity of a He-Ne laser and has more accuracy than the other gyros. It need the 1000V DC to create the He-Ne plasma in discharge tube. In this paper, the design process of the High Voltage Power Supply for RLG(Ring Laser Gyroscope) is described. The specification for High Voltage Power Supply (HVPS) is proposed. Also, The analysis of flyback converter topology is explained. The Design for the HVPS is composed of the inverter circuit, feedback control circuit, high frequency switching transformer design and voltage doubler circuit.

키워드

참고문헌

  1. Frederick F.Mobley, Wade E.Radford, and Lawrence R. Kennedy, "MSX Attitude Determination and Control Hardware", Johns Hopkins Apl Technical Digest, Volume 17, Number 2, 1996.
  2. Keith Billings, Switchmode Power Supply Handbook, McGraw-Hill, 2.3-2.58, 1989.
  3. 전자기술연구회, 전원회로 설계 마스터, 기문사, pp. 231-284, 2002.
  4. Rodloff. R, Burchardt. W, Jungbluth. W, "Measurements of Laser Gyro Errors as a Function of Beam Path Geometry", ESA-TT-992, pp. 1-41, 1985.
  5. F. Aronowitz, "The laser Gryo", Laser Application, Vol. 1, pp. 133, 1971.
  6. T. J. Hutchings, D. C. stjern, "Scale Factor Nonlinearity of a Body Dither Laser Gyro", IEEE, pp. 549, 1978.
  7. T. A. Dorschner, H. A. Haus, M. W. Smith, H. Statz, "Laser Gyro Quantum Limit", IEEE, pp. 1376. 1980.
  8. F. Aronowitz, R. J. Collins, "Mode Coupling Due to Backscattering in a He-Ne Traveling Wave Ring Laser", Applied Physics Letters, pp. 55, 1 July 1966.
  9. J. B. Matthews, M. I. Gneses, D. S. Berg, "A High Resolution Laser Gyro", IEEE, pp. 556, 1978.
  10. W. G. Albrecht, "State of the Art of German RLG Development : Latest Test Results of the Honeywell Sondertechnik Gyro DGD 800", Symposium Gyro Technology, pp. 11.0, 1986.
  11. J. D. Coccoli, S. B. Helfant, "The Intrinsic Stability of Laser Gyro Scale Factor", IEEE, pp. 574, 1978.
  12. Statz. H, Dorschner. T. A, Holtz. M, Smith. I. W, "The Multioscillator Ring-Laser Gyroscope", Laser Handbook, pp. 229-332, 1985.
  13. Aronowitz. F, The Laser Gyro in Laser Application, Academic Press, pp. 133-200, 1971.
  14. Sargent III. M, Scully. M.O, Laser Physics, Addison-Wesley, 1974.
  15. H. Malthan, "Test of a Honeywell GG1342 Ring Laser Gyro", Gymposium Gyro Technology, pp. 2.0, 1982.
  16. 최용진, 김재순, 이기홍, 송정영, "Characteristic Test of Ring Laser Gyro for Inertial Navigation", 유도무기 학술대회, Vol. 7, pp. 154, 1997.