• 한국식품조리과학회지
• /
• 제29권6호
• /
• pp.741-747
• /
• 2013

This study was carried out to investigate the quality characteristics of roll mill, jet mill Hericium erinaceus (HE) powders and seasonings using them (RPS and JPS). Water binding capacity of the jet mill HE powder(JP) was higher than that of roll mill HE powder(RP). The reduction of particle size resulted in the increases of specific surface area and JP showed smaller particle size than RP. $L^*$ of JP was significantly higher than that of RP. In sensory evaluation, the color and the flavor of seasoning showed on significant difference. Control and JPS got significantly high scores in 'Overall Acceptability' than RPS. Based on the results in this study, JPS is considered to have potential to be developed commercially as seasoning.

• 한국분말재료학회지
• /
• 제14권1호
• /
• pp.19-25
• /
• 2007

This study was focused on the optimization of low-pressure ultrasonic spraying process for synthesis of pure ${\gamma}-Fe_2O_3$ nanoparticles. As process variables, pressure in the reactor, precursor concentration, and reaction temperature were changed in order to control the chemical and microstructural properties of iron oxide nanoparticles including crystal phase, mean particle size and particle size distribution. X-ray diffraction (XRD) and transmission electron microscopy (TEM) studies revealed that pure ${\gamma}-Fe_2O_3$ nanoparticles with narrow particle size distribution of 5-15 nm were successfully synthesized from iron pentacarbonyl ($Fe(CO)_{5}$) in hexane under 30 mbar with precursor concentrations of 0.1M and 0.2M, at temperatures over $800^{\circ}C$. Also magnetic properties, coercivity ($H_c$) and saturation magnetization ($M_s$) were reported in terms of the microstructure of particles based on the results from vibration sampling magnetometer (VSM).

• 자원리싸이클링
• /
• 제10권4호
• /
• pp.3-9
• /
• 2001

박판상을 갖는 세리사이트 분말의 분쇄 효율을 향상시키기 위하여 분쇄조제 1 M $KNO_3$ 용액이 첨가된 분말을 시간에 따라 분쇄하였으며, 증류수만을 첨가하여 분쇄한 분말과 비교하였다. 분쇄된 분말의 평균 입자크기는 분쇄시간 1시간까지는 감소하다가 1시간 이후에는 미세 입자들간의 응집으로 증가하였다. 세리사이트 분말에 $1 M KNO_3$용액을 첨가한 경우 1시간 분쇄하였을 때 평균입자크기가 $1.9mu$m로 가장 작게 나타났으며 증류수를 첨가한 경우에도 1시간 분쇄 시 $2.4\mu$m로 가장 작게 나타났다.

• 한국입자에어로졸학회지
• /
• 제5권2호
• /
• pp.83-90
• /
• 2009

This paper describes a condensation-evaporation method (CEM) to produce size-controlled spherical silver nanoparticles by perturbing coagulation and coalescence processes in the gas phase. Polydisperse silver nanoparticles generated by the CEM were first introduced into a differential mobility analyzer (DMA) to select a group of silver nanoparticles with same electrical mobility, which also enables to make a group of nanoparticles with elongated structures and same projected area. These silver nanoparticles selected by the DMA were then in-situ sintered at ${\sim}600^{\circ}C$, and then they were observed to turn into spherical shaped nanoparticles by the rapid coalescence process. With the assistance of modified converging-typed quartz reactor, we can also produce the 10 times higher number concentration of silver nanoparticles compared with a general quartz reactor with uniform diameter. Finally, the spherical silver nanoparticles with 30 nm were electrostatically deposited on the surface of silicon substrate with the coverage rate of ~4%/hr. This useful preparation method of size-controlled monodisperse silver nanoparticles developed in this work can be applied to the various studies for characterizing the physical, chemical, optical, and biological properties of nanoparticles as a function of their size.

• Journal of Biosystems Engineering
• /
• 제20권3호
• /
• pp.236-244
• /
• 1995

Droplet size is one of the important factors in the deposition and drift of agrichemical application. In this study, droplet size and its distribution of the three different sizes of ceramic hollow cone nozzles being used in the air carrier sprayer for apple production were investigated at the various nozzle pressures and the three air velocities. The Malvern particle size analyzer were used for the measurement of droplet size and its distribution. The important results emerged from th is study can be summarized as follows. 1. Discharged rate was increase with the increase of the nozzle diameter and pressure, amount of the difference was remarkable between the nozzle diameter of 1.0, 1.2 and 1.5 mm, but no difference were found between the diameter of 1.0 and 1.2 mm in the same nozzle pressure. 2. Mass median diameter were varied as 40~160 ${mu}m$ at the air velocity of 0 m/s, 70~140 ${mu}m$ of 15 m/s and 100~160 ${mu}m$ of 20 m/s 3. It appeared that the air velocity range of 15~20 m/s was desirable for both drift and deposition control in the given experimental conditions.

• 펄프종이기술
• /
• 제39권4호
• /
• pp.29-37
• /
• 2007

The effects of latex particle size, basis weight of base paper and coating color concentration on the printing quality of coated paper were investigated. Coating colors were prepared with five types of latexes having different particle sizes. Coated papers were produced with high solid coating colors and with low solid coating colors in a industrial coater, respectively. In high solid coating colors, rheology modifier was used and GCC content was high. It was concluded that, in order to control binder migration and hence print mottle, latex particle sizes shall be controlled as well as formation, sizing degree and roughness of basis paper.

• 한국분말재료학회지
• /
• 제19권4호
• /
• pp.278-284
• /
• 2012

$Al_2O_3$ foam is an important engineering material because of its exceptional high-temperature stability, low thermal conductivity, good wear resistance, and stability in hostile chemical environment. In this work, $Al_2O_3$ foams were designed to control the microstructure, porosity, and cell size by varying different parameters such as the amount of amphiphile, solid loading, and stirring speed. Particle stabilized direct foaming technique was used and the $Al_2O_3$ particles were partially hydrophobized upon the adsorption of valeric acid on particles surface. The foam stability was drastically improved when these particles were irreversibly adsorbed at the air/water interface. However, there is still considerable ambiguity with regard to the effect of process parameters on the microstructure of particle-stabilized foam. In this study, the $Al_2O_3$ foam with open and closed-cell structure, cell size ranging from $20{\mu}m$ to $300{\mu}m$ having single strut wall and porosity from 75% to 93% were successfully fabricated by sintering at $1600^{\circ}C$ for 2 h in air.

• 한국자동차공학회논문집
• /
• 제22권7호
• /
• pp.8-15
• /
• 2014

In order to satisfy stringent future emission regulation in diesel engines, systematic approaches to mitigate the harmful exhaust emissions were developed, such as engine hardware, fuel injection equipment, engine control, and after-treatment system. In this study, to improve the nano-particle and NOx emissions from a state-of-the-arts diesel engine, effect of various EGR and fuel injection pressure with combustion analysis were evaluated. Size-resolved nano-particle and NOx emissions showed trade-off characteristics with various EGR rate and increment of fuel injection pressure.

• 한국재료학회지
• /
• 제12권11호
• /
• pp.850-855
• /
• 2002

Silica powders were prepared from $SiCl_4$-$H_2$O system by chemical vapor deposition process, and investigated on size control of the products with reaction conditions. The products were amorphous and nearly spherical particles with 130nm~50nm in size. The size distribution became narrow with the increase of [$H_2$O]/[SiCl$_4$] concentration ratio. The particle size decreased with the increase of reaction temperature, [$H_2$O]/[SiCl$_4$] concentration ratio and total flow rate. The specific surface area measured by BET method was about three times larger than that of electron microscope method.

• 자원리싸이클링
• /
• 제28권6호
• /
• pp.46-53
• /
• 2019

본 연구에서는 국내에 적절한 환경처리 없이 방치되어 있는 중석광미를 활용하여, 중석 광미 입도별 시멘트 모르타르 제조 후 수열합성온도별 물리적 특성을 확인하였다. 시멘트 모르타르 혼합 시 물-시멘트비는 75 %로, 모래-시멘트비는 400 %로 고정하였으며, 광미는 모래(모래 중량 대비 0 ~ 50 % )를 치환하여 사용하였다. 저비소 및 고비소 광미의 입경은 9.3 ~ 53.0 ㎛로 제어하였고 수열합성온도는 승온 속도 2 ℃로 고정하여 60 ~ 180 ℃에서 6시간 동안 유지하였다. 수열합성 온도가 증가에 따라 압축강도는 상승하였으며, 60분 분쇄 저비소 및 고비소 광미를 30 % 혼합 시 압축강도는 각각 55.2 MPa 및 54.5 MPa로, 비교시편 보다 300 % 이상 향상되는 결과를 도출하였다.