• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.3 s.28
• /
• pp.277-284
• /
• 1988

The purpose of study was to measure to body Surface area and the rational rate of Korean adult's women. The subjects are 20 years old to 49 years old women (Their bust width ranges from 74.5 to 101.5 cm, the height from 144.6 to 163.3 cm, the weight from 44.2 to 74.0 kg, Rohrer Index from 1. 02 to 1. 89). As the experimental method, both the gypsum method, by which the shape of body can be copied as it is, and weighing method, from which planed body surface area can be measured with consistant thickness of polypropylene film used. The results were obtained as follows. 1. After dividing the Korean adult's women into four groups (single and married women in their twenties, those in their thirties, those in their fourties). The change of body surface area was reviewed in accordance with age groups. No great difference among age group was showed in whole body surface area. 2. average value of body surface area is 1, 514m^2 and the part of trunk shows the biggest difference to the age groups. 3. After dividing the middle of body into two groups, the relation of symmetry of each parts is reviewed with difference in body surface area. The results shows that the part of head & neck and lower limbs are symmetrical. The part of trunk and upper limbs are unsymmetrical. 4. Regional rates of each part of whole body surface area are follows. head $4.98\%$, each-lobes $0.46\%$, neck $2.01\%$, face$2.48\%$, upper trunk $19.64\%$, lower trunk $13.91\%$, upper armpits $1.76\%$, lower armpits $12.52\%$, hands $4.64\%$, thighs $18.89\%$, lower legs$13.10\%$, feet $6.01\%$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.1
• /
• pp.3-13
• /
• 1999

This study was performed for purpose of getting fundamental information requisite to wear velvet clothes that is more comfortable for the human body and also the environment. It was carried out in a human wearing test and thermal manikin test at the same time in a controlled-condition chamber. The experimental environment had a ambient temperature of 15$\pm$0.5$^{\circ}C$ with the relative humidity at 5$^{\circ}C$$\pm$5% and with air velocity at less that than 0.2m/sec. Velvet differ from common plain weaves in thermal properties because it's constructed in two parts one is ground part and the other part is pile part. In order to investigate the thermal resistance of velvet eight different combination of 4 velvet kinds and 2 lings kinds as experimental clothes. [(4 velvet kinds : Acetate cuprammoium Rayon Cotton Wool) (2 lining kinds : acetate viscose rayon)longrightarrow8 combination: Aa, Av, Ra, Rv, Ca, Cv, Wa, Wv: the simplified character] The results of this study can be summarized as follows : 1. For the regional thermal resistance the differences in eight clothes as well as differences in each part were significant. As a whole the breast part showed the highest thermal resistance and the leg part was higher than the shank part. The rank of the total thermal resistance was put at Wa>Wv>Ca>Cv>Aa>Av>Ra>Rv in this order. 2. Considered clothing microclimate microclimate temperature has a similar tendency to the total thermal resistance. It showed a significance in the differences of eight clothes and each parts. the belly part was highest in every combination. On the other hand for clothing humidity there was a significance between back and breast part only in the human wearing test. 3. It was indicated that CLO value was highly positively correlated with the clothings' weight and showed a high negative correlation with the air permeability.

• Cross-Cultural Studies
• /
• v.31
• /
• pp.241-262
• /
• 2013

In this study, we select and analyze the slang that is represented in Elistratov's "Dictionary of Russian slang". Through the above analysis, some conclusions were drawn as follows: First, as a social and psychological phenomenon appears universal in all languages, the study of slang generates strict criteria for the analysis. Unlike literary language, listed in the dictionary slang expressions can become obsolete for their short period of usage by native speakers. Therefore, in the following research of the actual data, we have to validate words targeted for analysis. Second, as the result of the analysis it is metaphor for the most part studied rather than metonymy. The semantic derivations as a result of metonymy are used very frequently in real life. But in this study we mainly analyze words, therefore the number of words was less in metonymy than was expected. Third, the basic types of metaphor are appeared as similarity by form, function, and location, and there are varieties of intervening of subjectivity in similarity of emotional impression. Fourth, the metonymy is divided into three cases: the part meaning the whole, the whole meaning the part, and some thing meaning the reality of where it exists. Fifth, not only literary language, but also slang as the 'transitional process' is the most active way of development of new meanings, and there are two methods to transfer main meaning to second meaning.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.77-81
• /
• 2014

Purpose : In the current whole brain Radiation Therapy, Optimold was used to immobilize the head. However, skin dose was increased about 22% due to the scattering radiation by the Optimold. Since the minimum dose causing cataracts was 2 Gy, it could be seen that the effects were large especially on the lens. Therefore, in the whole brain Radiation Therapy, it was to compare and to evaluate the lens absorbed dose according to the presence of Optimold in the eyeball part. Materials and Methods : In order to compare and to evaluate the lens absorbed dose according to the presence of Optimold in the eyeball part, the Optimold mask was made ??up to 5mm bolus on the part of the eye lens in the human model phantom (Anderson Rando Phantom, USA). In the practice treatment, to measure the lens dose, the simulation therapy was processed by placing the GafChromic EBT3 film under bolus, and after the treatment plan was set up through the treatment planning system (Pinnacle, PHILIPS, USA), the treatments were measured repeatedly three times in the same way. After removing the Optimold mask in the eyeball part, it was measured in the same way as above. After scanning the film and measuring the dose by using the Digital Flatbed Scanner (Expression 10000XL, EPSON, USA), the doses were compared and evaluated according to the presence of Optimold mask in the eyeball part. Results : When there was the Optimold mask in the eyeball part, it was measured at $10.2cGy{\pm}1.5$ in the simulation therapy, and at $24.8cGy{\pm}2.7$ in the treatment, and when the Optimold mask was removed in the eye part, it was measured at $12.9cGy{\pm}2.2$ in the simulation therapy, and at $17.6cGy{\pm}1.5$ in the treatment. Conclusion : In case of removing the Optimold mask in the eyeball part, the dose was increased approximately 3 cGy in the simulation therapy and was reduced approximately 7 cGy in the treatment in comparison to the case that the Optimold mask was not removed. During the whole treatment, since the lens absorbed dose was reduced about 27%, the chance to cause cataracts and side effects was considered to be reduced due to decrease of the absorbed dose to the eye lens which had the high sensitivity on the radiation.

• The korean journal of orthodontics
• /
• v.9 no.1
• /
• pp.39-65
• /
• 1979

The purpose of this study was to investigate the pattern of irregularities of teeth in various malocclusion groups. The subjects consist of 803 out-patients (355 males, and 448 females) in department of Orthodontics of S.N.U. Hospital, Yonsei University, and Kyunghi University Hospital. The results were as follows. 1. The proportions of subjects on the basis of Angle's Classification were 39.2% (42.2% male, and 57.8% fomale) in class I malocclusion, 29.0% (44.6% male, and 55.4% female) in class II. div. 1., 3.5%(46.4% male, and 53.6% female) in class II. div. 2., 28.3%(46.3% male, and 53.7% female) in class III. 2. Considering all the subjects, the percentage of teeth crowding was 67.8% (45.0% male, and 55.0% female). In class I malocclusion, the percentage of Crowding was 70.8%(43.5% male, and 56.5% female) with higher frequency in upper anterior teeth than in lower anterior. 3. The percentage of Maxillary anterior diastema was 25.6% (45.6% male, and 54.4% female) on the whole. In class II. div. 1. malocclusion, the percentage was 28.8% (46.3% male, and 53.7% female) and in class III, the percentage was 19.8% (46.7% male, and 53.3% female). Thus, frequency of maxillary anterior distema, was comparatively higher in class II. div. 1. than in class III. 4. The percentage of high canine was 25.1% (53.2% male, and 46.8% female) on the whole, and was 86.0% male and 76.6% female in right side, 73.0% male and 72.3% female in left side. In calss II. div. 2., the percentage was 53.6% (46.7% male, and 53.3% female ). In class II. div. 1., the percentage was 16.7% (46.2% male, and 53.8%) with higher frequency in class II. div.2. 5. The percentage of deep overbite was 23.0% (43. 2% male, and 56.8% female) on the whole. Ia class 11. div. 2., and in clas sll. div. 1., its were 89.3%(48.0% male and 52.0% female), 54.5% (40.9% male, and 59.1% female) respectively. This result can be considered as one of the characterics of Angle's class 11 malocclusion group. 6. The percentage of spacing was 23.0% (36.8% male, and 63.2% female) on the whole, In class II. div. 1., and in class II. div. 2., its were 26.1% (44.3% male, and 55. 7% female), 7.1% (50.0% male, and 50.0% female) respectively. 7. The percentage of open bite was 14.3% (42.6% male, and 57.4% female) on the whole with higher rate on the anterior part. It rated 17.6%(50. 0% male, and 50.0% female) in class III, but none in class II. div. 2. 8. The percentage of crossbite was 22.5% (55.8% male, and 44.2% female) on the whole, with higher frequency on the anterior part than on the posterior part. In Angle's class III, it rated as much as 55.1% (57.6% male, and 42.4% female). 9. The percentage of edge-to-edge bite was 20.4% (47.6% male, and 52.4% female) with higher frequency on anterior part than on posterior part. 10. The percentage of irregularities of teeth in various malocclusion groups, was 21.5% (24.8% maxillary, and 18.1% mandible) in crowding, 20.8% (23.5% maxillary, and 18.0% mandible) in rotation, 10.7% (10.6% maxillary, and 10.8% mandible) in cross bite, 9.5% (11.8% maxillary, and 7.3% mandible) in spacing, 8.5% (8.5% maxillary, and 8.5% mandible) in edge-to-edge bite, 8.1% (8.3% maxillary, 7.8% mandible) in open bite. Crowding teeth, spacing teeth, and rotating teeh were more prevalent in anterior part than in posterior part. Cross bite teeth and edge-to-edge bite teeth were more prevalent in class III malocclusion than in another.

• Journal of applied mathematics & informatics
• /
• v.29 no.5_6
• /
• pp.1583-1602
• /
• 2011

A special system of partial differential equations (PDEs) occur in a natural way while studying a class of irrotational inviscid fluid flow problems involving infinite channels. Certain aspects of solutions of such PDEs are analyzed in the context of flow problems involving multiple layers of fluids of different constant densities in a channel associated with arbitrary bottom topography. The whole analysis is divided into two parts-part A and part B. In part A the linearized theory is employed along with the standard Fourier analysis to understand such flow problems and physical quantities of interest are derived analytically. In part B, the same set of problems handled in part A are examined in the light of a weakly non-linear theory involving perturbation in terms of a small parameter and it is shown that the original problems can be cast into KdV type of nonlinear PDEs involving the bottom topography occurring in one of the coefficients of these equations. Special cases of bottom topography are worked out in detail and expressions for quantities of physical importance are derived.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.109-113
• /
• 2000

The piercing and blanking of thin sheet metal working with a pilot punch guide is specified division in press die design and making. In order to prevent the detects, the optimum design of the production part, strip process layout, die design, die making and try out etc. are necessary the analysis of effective factors. For example, theory and practice of metal shearing process and its phenomena, die structure, machine tool working for die making, die materials and its heat treatment, metal working in industrial and its know how etc. In this study, we analyzed whole of data base, theoretical back ground of metal working process, and then performed the progressive die tryout with the screw press. This study regards to the aim of small quantity of production part's press working by piloting for accurate guide of actual sheet metal strip. Part 1 of this study reveals with production part and strip process layout for the die design.

• Korean Journal of Pharmacognosy
• /
• v.42 no.2
• /
• pp.187-194
• /
• 2011

Aldose reductase (AR), the key enzyme in the polyol pathway, plays an important role in the development of the diabetic complications. None of Aldose reductase Inhibitor (ARI) has achieved worldwide use because of limited efficacy or undesirable side effects. Therefore, evaluating natural sources for ARI potential may lead to the development of safer and more effective agents against diabetic complications. Fifty two Chinese herbal medicines have been investigated for inhibitory activities on AR. Among them, twelve herbal medicines, Artemisia anomala (aerial part), Centella asiatica (aerial part), Scutellaria baicalensis (root), Senecio chrysanthermoides (whole plant), Gleditsia japonica (twig), Zizyphus jujube (twig, leaf), Citrus aurantium (fruit), Hydnocarpus anthelmintica (fruit), Potaninia mongolica (aerial part), Tribulus terrestris (fruit), Artemisia apiacea (aerial part) and Eclipta prostrate (aerial part) exhibited a significant inhibitory activity against AR. Particularly, Artemisia anomala, Centella asiatica and Scutellaria baicalensis showed four times more potent inhibitory activity than the positive control, 3,3-tetramethyleneglutaric acid (TMG).

• 한국기계연구소 소보
• /
• s.16
• /
• pp.127-136
• /
• 1986

Recently deck crane of multi purpose cargo vessel (MPCV) is designed to posi¬tion in side instead of in the center line of the upper deck with a view to reduce the transportation cost and shipbuilding cost by shortening the length of ship. In this paper, the crane post was at first designed according to the crane maker’s specification and parent ship and the structure is analysed with Finite Ele¬ment Method. Through the careful reviews on the result of analysis, the final design of crane post was modified. The crane post is designed as a cylindrical in upper part and hexagonal in lower part instead of cylindrical on the whole as before. The connecting part of crane post is designed with the form of mixture of the cylinderical and hexagonal. Since the center of cylindrical and hexagonal section are not on the same line, it is expected to have the stress concentration. So, in order to attenuate the concentrated stress on the connecting part, the upper and lower parts was stiffened by inserting plate to enlarge the area of welding. The structure of deck part includes the tank side floor which is depend on the lower structure of the crane post that would support the force of the crane post by placing with 1.5 frame interval of the vertical plate.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1774-1777
• /
• 1997

As factory automation is required, using the vision system is also essential. Especially, the pateh planning of parts with J-lead on PCB plays a import role of whole automation. Path planning is required because J-lead is scatteed compaed to L-lead on PCB. Therefore, in this paper, we propose path planning of part inspection with J-lead to use Hopfield Model(TSP : Traveling Salesman Problem). Then optical system suited to J-lead inspection is designed and the algorithm of J-lead solder joint and part inspection is proposed.