• Journal of Environmental Science International
• /
• v.2 no.3
• /
• pp.193-199
• /
• 1993

This study has two objectives. One is developing the runoff model for Hoe-Dong Reservoir basin located at the upstream of Su-Young River in Pusan. To develop the runoff model, basic hydrological parameters - curve number to find effective rainfall, and storage coefficient, etc. - should be estimated. In this study, the effective rainfall was calculated by the SCS method, and the storage coefficient used in the Clark watershed routing was cited from the report of P.E.B. The other is the derivation of transfer function for Hoe-Dong Reservoir basin. The linear, discrete, input-output model which contained six parameters was selected, and the parameters were estimated by the least square method and the correlation function method, respectively. Throughout this study, rainfall and flood discharge data were based on the field observation in 1981.8.22 - 8.23 (typhoon Gladys). It was observed that the Clark watershed routing regenerated the flood hydrograph of typhoon Gladys very well, and this fact showed that the estimated hydrological parameters were relatively correct. Also, the calculated hydrograph by the linear, discrete, input-output model showed good agreement with the regenerated hydrograph at Hoe-Dong Dam site, so this model can be applicable to other small urban areas. Key Words : runoff, effective rainfall, SCS method, clark watershed iou상ng, hydrological parameters, parameter estimation, least square method, correlation function method, input-output model, typhoon gladys.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.19 no.2
• /
• pp.113-116
• /
• 2008

Baekgroud and Objectives: The study was purposed to evaluate the relationship between the voice change and the menstrual cycle by measuring the variation of subjective and objective parameters. Materials and Methods: Prospective study of 13 healthy women during 2 mentrual cycles. Their voices were recorded at follicular phase and then luteal phase of the menstrual cycle. We used both single vowel /a/ and sentences for evaluate acoustic parameters. Aerodynamic parameters were also evaluated. Voice handicap index (VHI), and the presence of premenstrual syndromes (PMS) were checked at each period. We used Wilcoxon's signed rank test to compare the parameters of two periods. Results: VHI were 5.1 at both periods (p=0.146) and 92.3% of women were diagnosable with PMS. There were no significant differences in acoustic parameters and aerodynamic parameters between the two periods. Conclusion: This study shows that not only the subjective but also the objective changes of the voice parameters did not exist during the menstrual cycle in women.

• Industrial Engineering and Management Systems
• /
• v.4 no.2
• /
• pp.184-191
• /
• 2005

In this article we study the feasibility of the Ant Colony Optimisation (ACO) algorithm for finding optimal Kanban allocations in Kanban systems represented by Stochastic Petri Net (SPN) models. Like other optimisation algorithms inspired by nature, such as Simulated Annealing/Genetic Algorithms, the ACO algorithm contains a large number of adjustable parameters. Thus we study the influence of the parameters on performance of ACO on the Kanban allocation problem, and identify the most important parameters.

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.305-307
• /
• 2012

This study was computationally explored how the fuel autoignition reactivity was affected by operating parameters such as fuel, pressure, intake temperatures, engine speed and EGR compositions for HCCI combustion. This is done for DME and CHEMKIN-PRO was used as a solver. At first, influence of the operating parameters and EGR compositions were showed. And then, in order to clarify the mechanism of them on autoignition reactivity, data-sets of kinetic were analyzed to investigate the elementary reaction path for heat release at transient tempeatures by using contribution matrix.

• Water for future
• /
• v.20 no.3
• /
• pp.229-235
• /
• 1987

The purpose of this study is to estimate the parameters of linear reservoir models in order to derive the Instantaneous unit hydrograph from a given small experimental watershed. The linear reservoir model is a conceptual model, consisting of cascade or parallel equal linear reservoirs, preceded by a linear channel which involved Nash, SLR(single linear reservoir) and 2-PLR(two-parallel linear Reservoir) model. the Nash model have two parameters N and K, single linear reseroir has one parameter $K_I$ and two-parallel linear reservoirs have two parameters $K_1,\;K_2$; where N denote the number of reservoirs and K is the storage coefficient of each reservoirs.

• Journal of Korean Society for Quality Management
• /
• v.15 no.1
• /
• pp.20-32
• /
• 1987

Estimation for the parameters of a bivariate exponential (BVE) model of Marshall and Olkin (1967) is investigated for the cases of complete sampling and time-truncated parallel sampling. Maximum likelihood estimators, method of moment estimators and Bayes estimators for the parameters of a BVE model are obtained and compared with each other. A Monte Cario simulation study for a moderate sized samples indicates that the Bayes estimators of parameters perform better than their maximum likelihood and method of moment estimators.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.413-420
• /
• 1998

In this study, optimum design methodology for rail vehicle suspension characteristics is suggested. Three parameters, primary lateral/longitunal stiffness and secondary lateral stiffness, are selected as design parameters. critical speed, suspension stroke trade-off and derailment coefficient are selectee as performance constraints. The optimum parameters to maximize ride quality are evaluated under the constraints. Steady-state curiving model to be able to evaluate derailment coefficient is developed. The combined design procedure is developed to evaluate Three parameters at the same time.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.5
• /
• pp.784-790
• /
• 2021

Objective : The purpose of this study was to investigate the correlations among various radiological parameters used to determine cervical alignment from cervical spine radiographs (X-CS) and cervical spine computed tomography (CT-CS), both within and between modalities. Methods : This study included 168 patients (≤60 years old) without a definite whole spine deformity who underwent CT-CS and X-CS. We measured occipital slope (O-s), C1 slope, C2 slope, C7 slope, sella turcica - C7 sagittal vertical axis (StC7-SVA), spino-cranial angle, T1 slope, and C27-SVA. We calculated the O-C2 angle, O-C7 angle, and C2-7 angle from the measured parameters and conducted correlation analyses among multiple parameters. Results : The intrinsic correlation features among multiple cervical parameters were very similar for both X-CS and CT-CS. The two SVA parameters (C27-SVA and StC7-SVA) were mainly influenced by the upper cervical slope parameters (r=|0.13-0.74|) rather than the lower slope cervical parameters (r=|0.08-0.13|). The correlation between X-CS and CT-CS for each radiological parameter was statistically significant (r=0.26-0.44) except for O-s (r=0.10) and StC7-SVA (r=0.11). Conclusion : The correlation patterns within X-CS and CT-CS were very similar in this study. The correlation between X-ray and CT was statistically significant for most radiological parameters, and the correlation score increased when the horizontal gaze was consistently maintained. The lower cervical parameters were not statistically associated with translation-related parameters (C2-7 SVA and StC7-SVA). Therefore, the upper cervical segment may be a better predictor for determining head and neck translation.

• Phonetics and Speech Sciences
• /
• v.3 no.3
• /
• pp.19-26
• /
• 2011

Previous laboratory studies have shown that prosodic structures are encoded in the modulations of phonetic patterns of speech including suprasegmental as well as segmental features. Drawing on a prosodically annotated large-scale speech data from the Buckeye corpus of conversational speech of American English, the current study first evaluated the reliability of prosody annotation by a large number of ordinary listeners and later examined whether and how prosodic prominence influences the phonetic realization of multiple acoustic parameters in everyday conversational speech. The results showed that all the measures of acoustic parameters including pitch, loudness, duration, and spectral balance are increased when heard as prominent. These findings suggest that prosodic prominence enhances the phonetic characteristics of the acoustic parameters. The results also showed that the degree of phonetic enhancement vary depending on the types of the acoustic parameters. With respect to the formant structure, the findings from the present study more consistently support Sonority Expansion Hypothesis than Hyperarticulation Hypothesis, showing that the lexically stressed vowels are hyperarticulated only when hyperarticulation does not interfere with sonority expansion. Taken all into account, the present study showed that prosodic prominence modulates the phonetic realization of the acoustic parameters to the direction of the phonetic strengthening in everyday conversational speech and ordinary listeners are attentive to such phonetic variation associated with prosody in speech perception. However, the present study also showed that in everyday conversational speech there is no single dominant acoustic measure signaling prosodic prominence and listeners must attend to such small acoustic variation or integrate acoustic information from multiple acoustic parameters in prosody perception.

• Structural Engineering and Mechanics
• /
• v.90 no.5
• /
• pp.505-515
• /
• 2024

In this study, obtaining theoretical stress-strain curves and determining the parameters defining the equivalent rectangular stress block were aimed for 3 and 4-layered rectangular Reinforced Concrete (RC) cross-sections subjected to flexure. For these aims, the analytical stress-strain model proposed by Hognestad was chosen for the concrete grades (20 MPa≤fck≤60 MPa) used in this study. The tensile strength of the concrete was neglected and the thickness of the concrete layers in the compression zone of the concrete cross-section was taken as equal. In addition, while concrete strength was kept constant within each layer, concrete strengths belonging to separate layers were increased from the neutral axis towards the outer face of the compression zone of the concrete cross-section. After the equivalent rectangular stress block parameters were determined by numerical iterations, variations of these parameters depending on concrete strength in layers and layer numbers were obtained. Finally, some analytical equations have been proposed to predict the equivalent stress block parameters for the 3 and 4-layered RC cross-sections and validities of these proposed equations were shown by different metrics in this study.