• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.487-494
• /
• 2019

본 논문에서는 토양에 침투하는 미세먼지의 영향을 피하여 폐쇄된 공간에서 물과 배양액을 이용하는 IOT(Internet of Things) 기반의 수경재배 식물공장을 제작하고, PLC(Programmable Logic Controller) 제어 방법을 제안한다. 제작된 수경재배 식물공장은 터치스크린과 스마트폰을 통하여 산소의 농도, 양액의 농도, 온도, 습도의 정도를 모니터링 하고, 히터 및 쿨러제어, 환풍기 및 제습장치 제어, LED의 파장 등을 사용하여 식물이 적정한 환경에서 성장할 수 있도록 제어한다.

• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.123-128
• /
• 2018

When the injection molding system molds some plastic products, defective product rate will be increased if plastic materials have some excessive moisture content. Therefore, it is very important to control the dehumidification and drying of plastic material. Since the moisture content of the plastic material may change from time to time depending on the material and the molding process, it is necessary to observe the change in real time and maintain a constant moisture content. To solve these problems, I proposed a smart factory system model for plastic molding in this paper. In addition, I designed the interface module to be installed in the dehumidifying dryer which is the core of this process. In addition to this, performance tests were conducted to check the effectiveness and the results were verified as valid.

• 전자통신동향분석
• /
• 제36권1호
• /
• pp.64-70
• /
• 2021

The future society will be changed through an artificial intelligence (AI) based intelligent revolution. To prepare for the future and strengthen industrial competitiveness, countries around the world are implementing various policies and strategies to utilize AI in the manufacturing industry, which is the basis of the national economy. Manufacturing AI technology should ensure accuracy and reliability in industry and should be explainable, unlike general-purpose AI that targets human intelligence. This paper presents the future shape of the "autonomous factory" through the convergence of manufacturing and AI. In addition, it examines technological issues and research status to realize the autonomous factory during the stages of recognition, planning, execution, and control of manufacturing work.

• Journal of information and communication convergence engineering
• /
• 제20권1호
• /
• pp.65-72
• /
• 2022

With the mark of the fourth industrial revolution, the smart factory is evolving into a new future manufacturing plant. As a human-machine-interactive tool, augmented reality (AR) helps workers acquire the proficiency needed in smart factories. The valuable data displayed on the AR device must be delivered intuitively to users. Current AR applications used in smart factories lack user movement calibration, and visual fiducial markers for position correction are detected only nearby. This paper demonstrates a marker-based object detection using perspective projection to adjust augmented content while maintaining the user's original perspective with displacement. A new angle, location, and scaling values for the AR content can be calculated by comparing equivalent marker positions in two images. Two experiments were conducted to verify the implementation of the algorithm and its practicality in the smart factory. The markers were well-detected in both experiments, and the applicability in smart factories was verified by presenting appropriate displacement values for AR contents according to various movements.

• 한국멀티미디어학회논문지
• /
• 제25권8호
• /
• pp.1085-1096
• /
• 2022

The manufacturing industry is continuously pursuing advanced technology and smartization as it converges with innovative technology. Improvement of manufacturing productivity is achieved by monitoring, analyzing, and controlling the facilities and processes of the manufacturing site in real time through a network. In this paper, we proposed a new OPC-UA based digital twin model for smart factory facilities. A testbed system for USB flash drive packaging facility was implemented based on the proposed digital twin model and OPC-UA data communication scheme. Through OPC-UA based digital twin model, equipment and process status information is transmitted and received from PLC to monitoring and control 3D digital models and physical models in real time. The usefulness of the developed digital twin testbed system was evaluated through usability test.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2021년도 추계학술대회
• /
• pp.41-44
• /
• 2021

In this paper, we propose an efficient reference-based compression artifact reduction network for 360-degree images in an equi-rectangular projection (ERP) domain. In our insight, conventional image restoration methods cannot be applied straightforwardly to 360-degree images due to the spherical distortion. To address this problem, we propose an adaptive disparity estimator using a deformable convolution to exploit correlation among 360-degree images. With the help of the proposed convolution, the disparity estimator establishes the spatial correspondence successfully between the ERPs and extract matched textures to be used for image restoration. The experimental results demonstrate that the proposed algorithm provides reliable high-quality textures from the reference and improves the quality of the restored image as compared to the state-of-the-art single image restoration methods.

• Journal of the Korean Data and Information Science Society
• /
• 제10권1호
• /
• pp.251-259
• /
• 1999

본 연구에서는 사출공장의 생산관리를 위한 정보시스템 구축사례를 소개한다. 제품의 효율적인 생산을 위해서는 영업과 수주에서부터 원청업체에 납품할 때까지의 전 생산과정과 관련된 정보를 체계적으로 관리하는 것이 필요하다. 이에 본 연구에서는 사출공장을 대상으로 수주, 생산, 납품, 재고 등과 관련된 전 정보를 체계적으로 관리하여, 생산 계획 및 현황의 관리와 이에 연계된 영업, 구매, 총무, 납품 등의 관리가 원활하고 효율적으로 이루어질 수 있도록 하는 통합 생산정보시스템을 구축한다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1991년도 춘계공동학술대회 발표논문 및 초록집; 전북대학교, 전주; 26-27 Apr. 1991
• /
• pp.51-65
• /
• 1991

This paper describes computer-integrated manufacturing (CIM) systems as strategic information systems for business which play an important role in accelerating the speed of business, and develops a measure showing a degree of business tendency to be CIM which enables the business to check on its present status as far as CIM is concerned. It is well known that the productivity of knowledge workers is lower than that of other workers. Nowadays, a great deal of effort goes into the productivity improvement of knowledge workers. In this respect, this paper also develops a quantitative model for the productivity of knowledge workers. Finally, this paper deals with following four steps which our small business should follow through its process of CIM: [Step 1] Using expert knowledge; [Step 2] Invention of technological information; [Step 3] Feedback of factory information to the management; and, [Step 4] Accelerating the speed of business.

• 품질경영학회지
• /
• 제19권1호
• /
• pp.141-150
• /
• 1991

This paper is aimed to construct a CIM(Computer Intergrated Manufacturing) model through optimal flexible manufacturing systems for factory automation in order to provide higher productivity. This paper provides a ease through an analytical method to construct flexible manufacturing systems for factory automation. The contents of this paper include forecasting of demands which analyze variation of demand using Winter's model, line balancing utilizing Lanked Positional Weight Method, and a case analysis through simulation by Monte Carlor Method. The result shows the manpower and net present value of investment have decreased 42% and 19.6%, respectively, and yearly net profit has increased 30%.

• 융합정보논문지
• /
• 제7권1호
• /
• pp.49-54
• /
• 2017

본 논문에서는 LED 식물공장과 연계하여 식물재배를 환경을 제공받고 사용자는 원격으로 식물재배에 참여함으로써 개인적인 취미생활을 영위할 수 있는 시스템을 제안한다. 제안 시스템은 아두이노를 기반으로 다양한 센서들을 통해 식물의 생장상황을 모니터링하고 식물생장에 필요한 재배환경을 원격으로 조정함으로써 식물재배 및 수확에 대한 대리만족을 느낄 수 있게 하였다. 한편, 식물공장은 유휴의 공간을 온라인으로 개인에게 유료 분양함으로써 일정한 소득원을 확보하게 되어 상호 이득이 되는 구조를 제안한다. 결론적으로 본 논문은 아두이노와 안드로이드 애플리케이션(앱)을 이용하여 원격 식물재배 위탁시스템의 시작품을 제작하여 보임으로써, 제안 시스템의 실현가능성을 보이고 향후 이를 이용한 LED 식물공장의 대중화 및 사업 영역확장에 기여 할 것이다.