• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.41-49
• /
• 2013

Objectives: The purpose of this study was to clarify the association between serum carcinoembryonic antigen (CEA) and type of work in the shipbuilding industry. Methods: 1,072 final study subjects were admitted to a general hospital from April through July 2010 for the purpose of medical examination. Data on general characteristics such as age, smoking history, alcohol history and exercise habits was gathered through structured self-administered questionnaires. Information on job factors was collected from a medical examination, by interview and through company personnel data. Serum CEA levels were measured after eight hours' fasting and were analyzed by a radioimmunoassay. Results: On univariate analysis, the mean serum CEA level was significantly higher among married (p=0.02), older age (p<0.01), longer work time (p<0.01), smokers (p<0.01), lower education (p<0.01), and indirect and direct exposure groups (p<0.01). On multiple regression analysis, serum CEA level was influenced by smoking (p=0.001), duration of work (p=0.019), and direct exposure group (p<0.001). However, among the direct exposure group, serum CEA level was not significantly different between welding, mounting, electro-device constructive work, grinding and cleaning, and painting. Conclusions: The goal of this research was to determine if there were differences between serum CEA levels according to occupational role among shipyard workers. The direct exposure group of shipyard workers had a relatively higher level of serum CEA than did the indirect exposure group and office workers, most likely due to occupational exposure.

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.3 s.35
• /
• pp.314-327
• /
• 1991

To evaluate the effects on health by exposure to mixed organic solvents, the author analyzed some labortory findings of blood (hemoglobin, hematocrit RBC, WBC, SGOT, SGPT) and urine (protein, blood, sugar) that were obtained from 722 workers (male:446, female:276) who worked in plywood, painting and shoes factories in Pusan area from January to December, 1990. The result were as follows ; 1. The mean values of each hematologic findings were all within normal limit but there were significant differences at hematocrit, RBC, WBC, SGOT in male and at WBC, SGPT in female at the comparison of the mean values and the distribution according to the normal criteria by type of work. 2. There were no differences in urinalysis(protein, blood, sugar) by type of work. 3. In stepwise multiple regression, analysis of hematologic findings on age, working duration and type of work, regression coefficients on age and type of work were relatively high in male and female sub1, respectively. As a result of this study, it is considered that the measurement of WBC with morphology is significant in hematologic findings and instead of spot urine and urinstix, 24 hours urine and quantitative analysis is required in urinalysis in screening test for healthy status of workers who deal with the organic solvents.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.95-103
• /
• 2021

I began to produce a series of works based upon the plastic element as a visual transmission -such as points, lines, sides, volumes and cubics, movements with in time, and space- which appeared in the optical art, that emerged in the 1950s and the early 1960. My works, which portray the natural scenes such as mountains, trees, and flowers that are commonly seen around us, are completed by drawing, erasing, filling with many points and overlapping. My works also ignore the scenography. All artistic activities must be based upon humanistic values and ultimately need to work for human being. The work with application of opt art did not use the perspective, but diverse colors. The work with application of opt art did not use the perspective, but diverse colors. The work tried to express more diverse impression rather than the emotion from the familiar perspective. We hope, therefore, my works give pleasure and satisfaction to these who come to see them.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.1 s.151
• /
• pp.48-54
• /
• 2007

Higher productivity and less cost during the manufacturing process of ships are required to maintain international competitiveness of modern shipbuilding industries. The integrated hull/ outfitting/ painting scheduling(IHOP) process is a final point, where logistics are finally being integrated and upcoming schedules are made. Therefore, more profits are expected from IHOP by effective management. In this thesis, IHOP is proposed in order to solve how to choose block erection date with IHOP scheduling logic. The result of IHOP scheduling is highly advised to utilize fabrication, outfitting shops. A standardized operation and load of resource will eventually be applied in long-term time span point of view for this will make it easy to enable capacity planning and workforce planning. It is also expected to eliminate inefficiency in overtime work and efficiently utilize manpower in short-term.

• Journal of the Korean Society of Safety
• /
• v.16 no.1
• /
• pp.79-83
• /
• 2001

Posture of the upper limbs in field works is known to be an important risk factor associated with CTD(Cumulative Trauma Disorders). In particular, uncomfortable posture and highly repetitive works in shipbuilding industry(for instance, sand blasting, grinding and blast painting, etc) made workers exposed to a great risk of injuries. The purpose of this paper is to analyze recruitment pattern of the muscles according to posture(joint angle displacement) during grinding. In this study, EMG signals of pectoralis major, latissimus dorsi, and posterior deltoid muscle were measured and analyzed from FlexComp EMG solution. And subjective ratings of perceived exertion were made using Borg's CR-10 rating scale.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.7
• /
• pp.578-583
• /
• 2001

The bushing for high voltage and large and power should endure weight of itself and force of pushing from contact with circuit breaker. Like this, epoxy mold bushing has to be strong without fault. However, the external circumstances and internal factors was caused by partial discharge, flashover and dielectric breakdown. Therefore, to remove external factor of defect and to prevent the internal cracks and cavity generated from the contraction on interface of Cu-Epoxy, we should form semi-conductive layer on Cu bar by carbon. Then, the PD properties and the insulation qualities of epoxy mold type bushing was able to improved by roles of cushions for the direction of diameter and by effects fo natural sliding like as separated from conductor for the direction of length. So, in this work, we could prove the method of semi-conductive layer in making the long conductor.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1757-1762
• /
• 2003

For coping with various ship types easily, welding automation using CAD/CAM is demanded and and developed. In this paper we propose a dedicated CAM system which generates MACRO files to control robot manipulators. The paper contains CAD interface, virtual simulation, macro generation and job schedulling. At first, it defines and extracts weldline from CAD data, and generates proper MACRO programs. And it obtains optimum job schedules. This system removes the manual work, and consequently reduces the overall lead time. And it reduces costs and time for developing robot welding programs. This can be expanded to virtual factory simulation technology. Moreover, it is possible to apply this system for automation of Cutting and Painting

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.4
• /
• pp.383-389
• /
• 2020

Accidents on construction sites involving fires do not occur as often as accidents involving falls from height or collapses. However, once a fire accident occurs, there is a high risk of a large number of casualties. Fire on construction sites is affected by working conditions and the types of activities the construction workers are engaged in at the sites. This study aims to identify activities and working conditions at construction sites that are vulnerable to fire, and analyse how they correlate with each other and how they affect the causes and consequences of fire accidents at construction sties. I analysed 40 fire accident reports and listed the situations vulnerable to fire at construction sites considering direct causes, activities, and working conditions. The most dangerous combination of fire hazards can be the heating devices used during rest/sleep in the office/cabin/storage during cold weather. The next most hazardous combination can be sparks arising from painting, waterproofing, insulation, plumbing, or welding/melting work in an underground or confined space.

• Journal of the Korea Furniture Society
• /
• v.11 no.1
• /
• pp.37-44
• /
• 2000

This work was done to investigate problems of cashew coating in a wooden-art industry such as ritual vessels and to improve a curing property of cashew film. The main problem in the cashew coating industry was a small-scale business, insufficiency of facilities, lack of knowledge about cashew resin and painting, and lack of a technology of productivity improvement by accelerated drying time of cashew film. In present, cashew coating for ritual vessels mostly used the petroleum as a thinner. The time of set to touch of cashew film thinning with petroleum on glass plates was increased with the increasement of the thinning proportion, but retarded from 3 to 11 times compared to that of an exclusive thinner according to thinning level. The addition of 20% aceton to petroleum contributed to the high reduction rate up to about 60% at the thinning level of 100%, which was effective to accelerate the drying time of cashew film. Even though only the petroleum or the petroleum-aceton(20%) mixture was used as a thinner, it did not exhibit any distinguishable differences in crack and appearance of cashew-film coated on Frexinus rhynchophylla after 5 cycles of soak under the vacuum-drying treatment.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2008.05a
• /
• pp.46-49
• /
• 2008

This research does Complexity form, Interior epidermis cell re-organization, Object discovery that have correct numerical value concept by purpose. Research applied by Grid re-organization in form generation, Parameter variation of cell unit (morphor, tweener), Symbol, pattern of variation, self-organization cell substitution order. Representation through 3d digital modeler of polygon, Nurbs and street-sheet program(x,y,z coordinates & Network way of points) etc. of main work. Investigator specified numbers of U profiles*30, V point-20 that is 600 Paramaters individual in volume, and define circle radius of lighting in object, Projection size variously and tried difference. Transposition cell to point and Heightened brightness of color using pointillism of painting. Led lighting cell object is expressed being decoded by digital code.