• 제목/요약/키워드: pCAST2

검색결과 290건 처리시간 0.026초

포워드캐스트(ForwardCast) : P2P에서의 새로운 VoD 스트리밍 방법 (ForwardCast : A New VOD Streaming Method in P2P)

  • 윤수미;김상철;김중환
    • 정보처리학회논문지B
    • /
    • 제12B권7호
    • /
    • pp.783-788
    • /
    • 2005
  • 최근 P2P(Peer-to-Peer) 네트워크를 VOD(Video On Demand) 스트리밍에 적용하는 연구들이 활발히 발표되고 있다. VOD 스트리밍에 관한 기존 연구를 살펴보면, 클라이언트의 새로운 서비스 요청시, 초기 지연을 없애는 전송과 서비스 기각률을 최소화하는 것을 가장 중요한 목표로 삼고 있다. 본 논문은 이들 목표를 달성하기 위해서 P2P 기반의 멀티캐스팅 트리를 이용해서 효과적으로 비디오 스트리밍(streaming)을 제공하는 새로운 방법, 일명 포워드캐스트(ForwardCast)를 제안한다. 제안된 방법은, 새로운 클라이언트는 초기 지연없이(zero-delay) 비디오를 전달받고, 경우에 따라서는 데이터의 앞, 뒤 부분을 동시에 전송받기도 한다. 실험 결과, 포워드캐스트는 기존 연구에 비해서 서버 부하를 증가시키지 않으면서 기각률을 낮출 수 있었다.

P2P 구조에 기반한 인터넷 방송 시스템 설계 및 구현 (Design and Implementation of Internet Broadcasting System based on P2P Architecture)

  • 우문섭;김남윤;황기태
    • 한국통신학회논문지
    • /
    • 제32권12B호
    • /
    • pp.758-766
    • /
    • 2007
  • 클라이언트-서버 구조의 스트리밍 시스템은 서버의 가용 능력에 따라 클라이언트의 개수가 제한되는 단점을 가지고 있다. 본 논문에서는 인터넷 방송 시스템의 확장성과 안정성을 지원하기 위해 P2P에 기반한 모델을 제시한 후, 프로토타입 시스템을 구현한 사례를 소개한다. 본 논문에서 구현한 시스템인 OmniCast264는 실시간으로 H.264 비디오 스트림을 제공하는 인코딩 서버, 스트림을 네트워크에 분배하는 스트리ald 서버, 비디오의 재생 및 분배를 담당하는 피어 노드, 그리고 P2P 네트워크에 노드를 동적으로 배치시키는 프록시 서버로 구성된다. P2P에기반한 OmniCast264은 스트리밍 부하의 분산화, 실시간 재생, 에러 발생에 따른 강건함, 계층의 모듈화 등의 개념을 가지고 있기 때문에 대용량의 인터넷 방송에 적합하다고 할 수 있다. 마지막으로 12 대의 PC들을 병렬 및 직렬 구조의 P2P로 구성한 후, OmniCast264의 성능을 평가하여 실시간 재생이 가능함을 검증하였다.

CV 흑연주철의 기지조직변화가 절삭성에 미치는 영향 (The Effect of Matrix of Compact Vermicular Graphite Cast Iron on Machinability in Lathe Turning)

  • 안상욱;박종봉
    • 한국정밀공학회지
    • /
    • 제5권1호
    • /
    • pp.50-62
    • /
    • 1988
  • An experimental investigation of the machining characteristics of compact vermicular cast iron whose matrix were formulated under two kinds of annealing conditions has been conducted. The various characteristics of the machinability of CA cast iron depending upon its matrix and cutting condition have been obtained from the experiment. The results are as follow. As depth of cut increases, the shear stress slightly decreases in order $P_1, \P_2, \P_3$ which are classified by ferrite matrix of CV cast iron. As depth of cut increases, the normal stress increases, and annealing effect in heavy cutting is smaller than that in light cutting. The cutting energy slightly decreases, as depth of cut increases and the effect of annealing on cutting energy in light cutting is higher than that in heavy cutting. The cutting equation in this study are as follow. $P_1\:\2{\phi}\ + \1.49({\beta} - {\alpha} )=84^{\circ}$ $P_2\:\2{\phi}\ + \1.36({\beta} - {\alpha} )=82^{\circ}$ $P_3\:\2{\phi}\ + \1.34({\beta} - {\alpha} )=79^{\circ}$ Machining constants in this study for $P_1, P_2, P_3$give $74^{\circ} , 66^{\circ}, 61^{\circ}$ Tool wear increases as depth of cut increases, and decreases as ferrit matrix increases.

  • PDF

고인(高燐), 고규소(高硅素) 구상흑연주철(球狀黑鉛鑄鐵)의 기계적(機械的) 성질(性質)에 관(關)한 연구(硏究) (A Study on the Mechanical Properties of High-P, High-Si Ductile Cast Iron)

  • 김하영
    • 한국주조공학회지
    • /
    • 제8권3호
    • /
    • pp.296-309
    • /
    • 1988
  • In this study the mechanical properties of ferritic ductile cast iron in as-cast are discussed by metallographic considering the effect of phosphorus content(about 0 - 0.8wt.%). In ferritic S.G. cast iron containing about 4.2wt.% Si, 0.5wt.% Ni, 0.02wt.%B, these samples are investigated for castability, microstructure, machinability, wear resistance, mechanical and thermal properties. The main results are summarized as follows. 1) The chill depth increased greatly with P addition up to about 0.6wt.% but the tensile strength and the elongation are decreased smoothly. 2) The size of S.G. and the amount of steadite increase with increasing P content. This means the tendency of increasing the number of S.G. 3) The maximum value of wear by mechanical fracture was appeared at the abrasion speed of 1.14m/sec and the plastic Flow layers are stretched longly on the wear surface with decreasing P content. 4) Although the coefficient of thermal expansion increased with P addition, the cast iron growth was slowing down extremely at 0.6w.% P or more.

  • PDF

P2P 구조에 기반한 인터넷 방송 시스템 설계 및 구현 (Design and Implementation of Internet Broadcasting System Based on P2P Architecture)

  • 우문섭;정원태;김남윤;황기태
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2007년도 춘계학술발표대회
    • /
    • pp.107-110
    • /
    • 2007
  • 클라이언트-서버 구조의 스트리밍 시스템은 서버의 가용 능력에 따라 클라이언트의 개수가 제한되는 단점을 가진다. 본 논문에서는 인터넷 방송 시스템의 확장성과 안정성을 지원하기 위해 P2P에 기반한 모델을 제시한 후, 프로토타입 시스템을 설계 및 구현하였다. 본 논문에서 구현한 시스템 OmniCast264는 H.264 비디오 스트림을 제공하는 인코딩서버와 스트리밍서버, 피어노드, 프록시 서버로 구성된다. OmniCast264는 스트리밍 부하의 분산화, 실시간성, 에러 발생에 따른 강건함, 계층의 모듈화등의 개념을 가지고 있기 때문에 대용량의 인터넷 방송에 적합하다고 할 수 있다. 마지막으로 PC들을 병렬 및 직렬 구조의 유형으로 나누어 P2P를 구성한 후, OmniCast264의 성능을 평가하여 실시간 재생이 가능함을 검증하였다.

  • PDF

한우(Bos taurus coreanae)의 CAST 유전자 내 변이지역 탐색 및 경제형질과의 연관성 분석 (Identification of Polymorphisms in CAST Gene Associated with Economic Traits in Hanwoo (Bos taurus coreanae))

  • 오재돈;이진아;이건우;박경도;조병욱;전광주;이학교;공홍식
    • 생명과학회지
    • /
    • 제20권10호
    • /
    • pp.1498-1504
    • /
    • 2010
  • Calpastatin (CAST)은 calpain의 억제제 역할을 하는 유전자이며 BTA7에 위치하고 있다. Calpain을 억제하는 CAST 유전자 내 다형성이 육질의 연도에 영향을 미치고 있는 것이 알려져 있다. 또한 여러 연구를 통해 calpain 시스템은 일반 골격근의 성장에 중요한 역할을 하는 것으로 보고되었다. 따라서 본 연구는 한우 집단의 CAST 유전자 내 변이 지역을 탐색하여 경제형질과의 연관성을 분석하기 위하여 실시하였다. CAST 유전자(Accession no. NC_007305) 단일염기변이지역을 탐색 결과 총 5개의 변이(109749T/C, 116151G/A, 109737G/A, 109823T/C, 109926G/A) 지역이 탐색 NCBI에 등록되어 있지 않은 새로운 변이로 본 연구를 통해 탐색되었다. 한우집단 내에서 탐색된 총 5개의 SNP를 대상으로 연관불균형(LD, Linkage disequilibrium) 분석을 수행하였다. 변이들 간의 연관불균형(LD) 정도가 가장 낮은 수준에 있는 2개의 변이지역(109926G/A와 116151G/A, $r^2$=0.038)을 대상으로 경제형질과의 연관성 분석을 실시한 결과 등심단면적(109926G/A, p<0.05)과 18개월령 체중(116151G/A, p<0.05)에서 유의적인 연관성이 검출 되었다. CAST유전자는 도축 후 숙성과정에서 고기의 연도를 증가시키는데 영향을 미칠 뿐만 아니라 가축의 성장에도 깊은 연관성이 있으며, 본 연구를 통해 CAST 유전자 내 변이는 성장 관련 형질과의 연관성이 유의적인 것으로 확인되었다.

고 Si-P 첨가가 박육구상흑연주철의 미세 조직과 기계적 성질에 미치는 영향 (Effects of high Si-P Addition on Microstructure and Mechanical Properties of Thin Ductile Cast Iron)

  • 박용진;최양진;박인선;김영환;이효상
    • 한국주조공학회지
    • /
    • 제15권6호
    • /
    • pp.558-565
    • /
    • 1995
  • Effects of high Si-P addition on microstructure and mechanical properties of thin ductile cast iron have been investigated. The amount of silicon addition have fixed on 4.0wt% and the amounts of phosphorus addition and thickness of specimen have been varied from 0.05 to 0.8wt% and ${\phi}13mm$, ${\phi}10mm$ and ${\phi}6mm$, respectively. As the casting thickness decreased, the average diameter of spheroidal graphite was decreased and the hardness of the cast iron increased. By adding P, the average diameter of spheroidal graphite was increased and the count of the spheroidal graphite was decreased continuously. And the tensile strength and the elongation was decreased, and the hardness was increased. With the P added more than 0.2wt%, the abraded amount was decreased significantly. The addition of P improved the wear resistance and the hardness of thin ductile cast iron.

  • PDF

채소용 육묘 상토로서 지렁이분립의 이용 (Utilization of Earthworm Cast as a Component of Plant Growth Medium for Tomato)

  • 조익환;전하준;이주삼
    • 한국유기농업학회지
    • /
    • 제11권1호
    • /
    • pp.55-66
    • /
    • 2003
  • 본 연구에서는 음식물쓰레기와 축분의 vermicomposting 처리로 얻어지는 지렁이 분립을 이용하여 채소의 육묘상토 자재로서의 이용가능성을 조사하기 위해, 시판상토 100%, 지렁이분립 100%, 지렁이분립 50% + vermiculite 50%, 지렁이분립 50% + Perlite 50% 및 지렁이분립 40% + vermiculite 30% + perlite 30%의 각각 다른 지렁이분립 혼합비율이 토마토(Lycopersicum esculentum Mill.) 유묘의 생육에 미치는 영향을 조사하였다. 토마토 생육 2주째까지는 시판상토구가 전 처리구에서 초장, 엽수, 경경, 엽중, 경중, 지상부중, 근중 및 생물수량이 가장 높았지만, 이후부터는 지렁이 분립 100%구가 다른 처리구보다 유의하게 높았으며 (p<0.05), 시판상토구에 비해서도 양호한 생육을 나타내었다. 지렁이 분립과 Vermiculite를 혼합한 구는 시판상토구와 유사한 생육을 나타내었다. 한편 생물수량의 상대생장율(BYRGR), 지상부 무게의 상대생장율(RGR) 및 지하부무게의 상대생장율(RWGR)은 생육 4주 째까지 지렁이 분립 100% 구가 다른 처리구 보다 유의하게 높았다(P<0.05).

  • PDF

Mapping of the Porcine Calpastatin Gene and Association Study of Its Variance with Economic Traits in Pigs

  • Choi, B.H.;Lee, J.S.;Jang, G.W.;Lee, H.Y.;Lee, J.W.;Lee, K.T.;Chung, H.Y.;Park, H.S.;Oh, S.J.;Sun, S.S.;Myung, K.H.;Cheong, I.C.;Kim, T.H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제19권8호
    • /
    • pp.1085-1089
    • /
    • 2006
  • The objectives of this study were to confirm a location of the calpastatin (CAST) gene in chromosome 2 and to detect associations of genetic variations with economic traits in the porcine CAST gene as a candidate gene for growth and meat quality traits in pigs. Calpastatin is a specific endogenous inhibitor of calpains. The calpain protease system is ubiquitous, and is involved in numerous growth and metabolic processes. Three single nucleotide variations were identified within a 1.6 kb fragment of the porcine CAST gene and these polymorphisms were used for genetic linkage mapping. Linkage and QTL mapping were performed with the National Livestock Research Institute (NLRI) reference families using eight microsatellites and SNP makers in the CAST gene. The porcine CAST gene was mapped adjacent to the markers, SW395 and SW1695 on SSC2 with LOD scores of 15.32 and 8.50, respectively. According to the QTL mapping, a significant association was detected at 82 cM between SW395 and CAST-Hinf I for weight at the age of 30 weeks. In addition, an association study was performed with the $F_2$ animals of NLRI reference families for Hinf I, Msp I and Rsa I polymorphisms in the CAST gene. Two polymorphisms, CAST-Rsa I and CAST-Hinf I, showed significant correlation for growth traits at p<0.01 and p<0.05, respectively.

球狀黑鉛鑄鐵의 基地組織이 切削性에 미치는 影響 I (The Effect of Matric of Nodular Graphite Cast Iron on Machinability in Lathe Turning)

  • 성환태;안상욱
    • 대한기계학회논문집
    • /
    • 제11권1호
    • /
    • pp.74-81
    • /
    • 1987
  • 본 논문에서는 구상흑연주철을 어니일링하여 퍼라이트기지와 페라이트기지의 양을 조정하므로서 절삭성이 어느 정도 향상되는가를 실험검토하였다. 제일보에서는 퍼라이트기지가 페라이트기지로 변화할 때에 절삭비, 전단각 및 절삭저항에 어떠한 영 향을 주는가를 검토하였고, 본보에서는 기지조직의 변화가 전단응력 및 절삭에너지에 미치는 영향을 검토하였으며 각조직에 대한 절삭방정식과 절삭정수를 결정하였다.