• 공업화학
• /
• 제16권5호
• /
• pp.684-688
• /
• 2005

산도가 각기 다른 양성자산(HF, HCI, HBr, HI, $H_2SO_4$)의 수용액내에서 아닐린을 중합하였다. 이때 산도(pH)와 상대이온(counter ion)의 반응성에 따른 반응속도에 관하여 조사하였다. 반응속도에 대한 양성자산의 영향을 조사하기 위하여, open-circuit potential을 측정하였다. 그 결과 HF 수용액내에서 중합속도가 가장 느리게 나타났고, HI 수용액내에서는 중합반응이 진행되지 않았으며, 이러한 결과들을 산도(pH)와 산화력과의 관계로 설명하였다. 양성자산의 종류에 따라 dimer들의 생성비율도 각기 다르게 나타났으며, 이러한 결과들을 상대이온(음이온)의 친핵성도 (nucleophilicity), 용매화효과 및 이동도의 영향으로 설명하였다.

• 폴리머
• /
• 제30권4호
• /
• pp.357-361
• /
• 2006

생체 내에서 생성되는 알파 리포산은 산화방지, 혈당량 조절뿐만 아니라 식욕 억제, 비만 억제 효과 등을 가지고 있다. 약물로도 이용되고 있는 이 물질은 두 개의 황을 함유하고 있는 오각형 고리구조를 가지고 있어, 열과 자외선에 의해서 쉽게 개환되고 나아가 고분자로 중합될 수 있어서 약물로서 투여했을 경우 생체 이용률이 낮아지는 문제가 보고되어 있다. 본 연구는 개환에 따른 고분자화를 위한 다양한 조건을 조사하였다. 리포산은 녹는점이 지나야만 개환이 발생하였지만 그 이상의 온도에서는 온도의존성이 없었다. $70^{\circ}C$에서 개환율은 시간에 비례하였고 농도에 반비례하였다. 1시간 동안, $70^{\circ}C$ 아세트산에서 자외선과 함께 개환된 경우 개환율은 가장 높은 70% 였다. 이렇게 개환된 알파 리포산들은 대부분이 이황 고분자로 변했고, 개환율이 커질수록 고분자의 분자량 도 증가하였다.

• 한국잠사곤충학회지
• /
• 제41권3호
• /
• pp.185-195
• /
• 1999

This study was carried out to improve the skin care property of the polyester fabric by finishing with sericin. It was known that skin care function, anti-oxidation, anti-tyrosinase activity and anti-elastase activity can be achieved from sericin finish. But, the moisture regain of the finished fabric was measured simply, because the major cause of the discomfort from polyester fabric has been anounced to be wetness. The effects of various treatment conditions on the properties of the finished fabric were measured, and obtained results were as follows: 1. The moisture regain at 40$^{\circ}C$ 90% RH were increased with the sericin uptake increasing. while it was not significant for the effects on the moisture regain depending on the treatment conditions like the degree of polymerization and treatment concentration of the binder. The moisture release of the fabric having sericin uptake 1%, 2% was faster than non treated fabric. The change of the moisture regain of the finished fabric from 40$^{\circ}C$ 90% RH to room temperature was 4∼5 times higher than that of knitted cotton fabric. 2. The frictional static charge was decreased with the degree of polymerization of the binder increasing. While the sericin uptake and treatment concentration of the binder were not significant. 3. The whiteness value of the fabric was slightly decreased by finishing with sericin and binder. In that cases, W values of the finished fabrics were above 90 while that depending on the degree of polymerization of the binder was not significant. 4. The major cause of the yellowness of the finished fabric was proved to be catalyst. The yellowness of the finished fabric with sulfur containing catalyst was lower than that with amine group containing catalyst. 5. The effects of the treatment concentrations of the cross-linking agent, catalyst and drying time on the wash durability were not significant.

• 한국표면공학회지
• /
• 제53권5호
• /
• pp.201-206
• /
• 2020

A SiOxCy(-H) thin film was synthesized by atmospheric pressure dielectric barrier discharge(APDBD), and a SiO₂-like layer was formed on the surface of the film by oxidation treatment using oxygen plasma. Hexamethylcyclotrisiloxane was used as a precursor for the SiOxCy(-H) synthesis, and He gas was used for stabilizing APDBD. Oxygen permeability was evaluated by forming an oxidized SiOxCy(-H) thin film on a PET film. When the single-layer oxidized SiOxCy(-H) film was coated on the PET, the oxygen gas permeability decreased by 46% compared with bare PET. In case of three-layer oxidized SiOxCy(-H) film, the oxygen gas permeability decreased by 73%. The oxygen permeability was affected by the thickness of the SiO₂-like layer formed by oxidation treatment rather than the thickness of the SiOxCy(-H) film. The excellent corrosion resistance was demonstrated by coating an oxidized SiOxCy(-H) thin film on the silver-coated aluminum PCB for light emitting diode (LED).

• Journal of the Korean Wood Science and Technology
• /
• 제31권6호
• /
• pp.31-39
• /
• 2003

The enzymatic isolation of residual lignins obtained from spruce and beech pulps (obtained by sulfite, kraft, ASAM and soda/AQ/MeOH pulping processes) and their characterization was described in previous publications. Here, the residual lignins have been submitted to potassium permanganate oxidation (KMnO₄ degradation), and 9 aromatic carboxylic acids (3 of them are dimeric) were identified after methylation with diazomethane by GC/MS. The analytical challenge during qantification by the internal standard methods was the partly high protein content of the samples, which resulted in elevated anisic acid yields in the degradation mixture of sulfite residual lignins. The results are compared with the KMnO₄ degradation of the corresponding MWLs and discussed in terms of S/G ratios and degrees of condensation. The latter was calculated as a quotient between the aromatic carboxylic acids derived from condensed and non-condensed lignin structures. Typical degradation patterns for the various processes have been observed. Among other parameter, the relative compositions between iso-hemipinic acid (which is for condensation in pos. 5 of the aromatic ring) and meta-hemipinic acid and 3,4,5-trimethoxyphthalic acid (both are for condensation in pos. 6 of the aromatic ring) was found to be process specific. Kraft and soda/AQ/MeOH residual lignins yielded higher amounts of iso-hemipinic acid. In contrast, the relative yields of meta-hemipinic acid and 3,4,5-trimethoxyphthalic acid (the latter in beech lignins) are higher in sulfite and particularly in ASAM residual lignin. In case of beech residual lignins the amount of acids originated from non-condensed syringyl type lignin units was surprisingly high. The condensation degree of residual lignins was shown to be generally higher than that of MWLs. This was especially true for the G units. ASAM residual lignin exhibited very high S/G ratios and degrees of polymerization. Causality between condensation degree and total yield of degradation products was demonstrated.

• 폴리머
• /
• 제38권6호
• /
• pp.827-831
• /
• 2014

라디칼 고분자화 반응 후 산화법을 이용하여 나이트록실 라디칼 고분자를 제조하였다. 두 가지 방법으로 산화된 라디칼 고분자의 라디칼 농도를 electroparamagnetic resonance spectroscopy(EPR) 법과 UV-visible absorption (UV-vis) 방법을 통하여 측정하고 이를 통해 과산화수소수-$Na_2WO_4$ 법으로 산화하였을 때 라디칼 농도가 97.6% 정도 높게 얻어짐을 확인하였다. 또한 UV-vis 법은 정량적인 분석이 어려우나 대략적인 라디칼 형성 정도를 평가하는데 유용함을 확인하였다. 제조된 유기라디칼 고분를 리튬이온전지 양극재로 적용한 결과 우수한 용량, 초기효율, 높은 속도 특성을 가짐을 알수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제28권10호
• /
• pp.1777-1780
• /
• 2007

The synthesis of well-defined dendrons based on aliphatic polyether dendritic cores and glassy polystyrene peripheries is described. The synthetic route involves a combination of living anionic polymerization and a stepwise convergent method consisting of iterative Williamson etherification and hydroboration/oxidation reactions. On the basis of molecular weight, as characterized by gel permeation chromatography (GPC), the first generation dendron (Generation-1) shows a random coil conformation like a linear polystyrene, while higher generations (Generation-2 and 3) reveal globular forms in solution.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.973-974
• /
• 2004

We report the fabrication of flexible plastic ITO substrates and the measurement of oxidant permeation through the substrates. The plastic ITO substrates are composed of multiple organic and inorganic thin films. The organic thin films are deposited by vapor polymerization and the inorganic films are deposited by ion beam sputtering. In order to estimate the oxidant permeation rate, the pure Ca film is formed on the substrates and the amount of CaO produced by the oxidation of Ca is measured.

• Carbon letters
• /
• 제13권3호
• /
• pp.157-160
• /
• 2012

In this work, iron oxide ($Fe_3O_4$) nanoparticles were deposited on multi-walled carbon nanotubes (MWNTs) by a simple chemical coprecipitation method and $Fe_3O_4$-decorated MWNTs (Fe-MWNTs)/polypyrrole (PPy) nanocomposites (Fe-MWNTs/PPy) were prepared by oxidation polymerization. The effect of the PPy on the electrochemical properties of the Fe-MWNTs was investigated. The structures characteristics and surface properties of MWNTs, Fe-MWNTs, and Fe-MWNTs/PPy were characterized by X-ray diffraction and X-ray photoelectron spectroscopy, respectively. The electrochemical performances of MWNTs, Fe-MWNTs, and Fe-MWNTs/PPy were determined by cyclic voltammetry and galvanostatic charge/discharge characteristics in a 1.0 M sodium sulfite electrolyte. The results showed that the Fe-MWNTs/PPy electrode had typical pseudo-capacitive behavior and a specific capacitance significantly greater than that of the Fe-MWNT electrode, indicating an enhanced electrochemical performance of the Fe-MWNTs/PPy due to their high electrical properties.

• Korea-Australia Rheology Journal
• /
• 제16권4호
• /
• pp.193-199
• /
• 2004

Poly(o-ethoxy)aniline (PEOA)/organoclay nanocomposite was prepared via a solvent intercalation using chloroform as a cosolvent with organically modified montmorillonite (OMMT) clay. The PEOA initially synthesized from a chemical oxidation polymerization in an acidic condition at pH = 1 was intercalated into interlayers of the clay with $25\;wt{\%}$ clay content. Electrical conductivity of the PEOA/OMMT nano­composite was found to be controlled via the intercalating process. The synthesized PEOA/OMMT nano­composite was characterized via an XRD and a TGA, and then adopted as an electrorheological (ER) material. The PEOA/OMMT synthesized with controllable electrical conductivity without a dedoping pro­cess was found to show typical ER characteristics possessing a yield stress from both steady state and dynamic measurements under an applied electric field.