• Korean Journal of Materials Research
• /
• v.24 no.1
• /
• pp.6-12
• /
• 2014

In the present work, $WO_3$ and $WO_3-TiO_2$ were prepared by the chemical deposition method. Structural variations, surface state and elemental compositions were investigated for preparation of $WO_3-TiO_2$ sonocatalyst. X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and transmission electron microscopy (TEM) were employed for characterization of these new photocatalysts. A rhodamine B (Rh.B) solution under ultrasonic irradiation was used to determine the catalytic activity. Excellent catalytic degradation of an Rh.B solution was observed using the $WO_3-TiO_2$ composites under ultrasonic irradiation. Sonocatalytic degradation is a novel technology of treating wastewater. During the ultrasonic treatment of aqueous solutions sonoluminescence, cavitaties and "hot spot" occurred, leading to the dissociation of water molecules. In case of a $WO_3$ coupled system, a semiconductor coupled with two components has a beneficial role in improving charge separation and enhancing $TiO_2$ response to ultrasonic radiations. In case of the addition of $WO_3$ as new matter, the excited electrons from the $WO_3$ particles are quickly transferred to $TiO_2$ particle, as the conduction band of $WO_3$ is 0.74 eV which is -0.5 eV more than that of $TiO_2$. This transfer of charge should enhance the oxidation of the adsorbed organic substrate. The result shows that the photocatalytic performance of $TiO_2$ nanoparticles was improved by loading $WO_3$.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.211-216
• /
• 2004

Mono-and diacylglycerol-enriched oil was produced from corn oil through enzymatic glycerolysis using 1,3-specific immobilized lipase in solvent-free system and stirred-tank batch reactor. HPLC analysis revealed enriched oil was respectively composed of: 45.05, 16.27, 23.05, and 14.98% triacylglycerol, 1,3-diacylglycerol, 1,2-diacylglycerol, and monoacylglycerol; 13.21, 0.15, 2.02, 34.36, 49.12, and 1.14 mol% palmitic, palmitoleic, stearic, oleic, linoleic, and linolenic acids; and 0.014, 0.029, 0.010 and 0.053% ${\alpha},\;{\gamma},\;{\delta}-$, and total tocopherols. Physiochemical and melting properties of enriched oil were evaluated. Oxidative stability study revealed enriched oil showed higher peroxide and p-anisidine values than corn oil. Rosemary extracts (100 to 300 ppm) reduce oxidation.

• Journal of the Korean Ceramic Society
• /
• v.29 no.8
• /
• pp.601-608
• /
• 1992

We investigated the influence of several processes, including the preparation of slurry and preform and the heat-treatment of the preform, on the properties of composites to fabricate the carbon-fiber reinforced glass composites having good mechanical properties. Cerander was determined to be the best binder among Cerander, Rhoplex and Elvacite 2045 by the dipping test and the binder within a preform could be completely eliminatd by burning out the specimen under 10-6 Torr at 400$^{\circ}C$ for more than 1h. The fracture behavior of a composite was largely dependent on the uniformity of carbon-fiber distribution within the composite and the heat-treatment condition of the composite. The higher the glass content, the more difficult to obtain uniform distribution of carbon-fiber. As the hot-pressing temperature increased, the densification process of the composite and the formation of pore due to oxidation of carbon fiber occurred competitively. But, above 1000$^{\circ}C$ the latter played a predominant role. We could fabricated the densest 15 vol.% carbon-fiber-content glass composite having the highest toughness and flexural strength of 250 MPa by hot-pressing under 15 MPa at 900$^{\circ}C$ for 30 min.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.9
• /
• pp.423-429
• /
• 2002

RuOx thin films were fabricated by the method of liquid delivery MOCVD using Ru(C$_{8}$ $H_{13}$ $O_2$)$_3$ as the precursor and their thermal effects and conductivity were investigated. Ru films deposited at 25$0^{\circ}C$ were annealed at $650^{\circ}C$ for 1min with Ar, $N_2$ or N $H_3$ ambient. The changes of the micro-structure, the surface morphology and the electrical resistivity of the Ru films after annealing were studied. Ar gas was more effective than $N_2$ and N $H_3$ gases as an ambient gas for the post annealing of the Ru films, because of smaller resistivity and denser grains. The X-ray diffraction and X-ray photoelectron spectroscopy results indicate that the Ru $O_2$ phase and the silicidation are not observed regardless of the ambient gases. The minimum resistivity of the Ru film is found to have the value of 26.35 $\mu$Ω-cm in Ar ambient. Voids were formed at Ru/TiN interface of the Ru layer after annea1ing in $N_2$ ambient. The $N_2$ gas generated due to the oxidation of the TiN layer accumulated at the Ru/TiN interface, forming bubbles; consequently, the stacked film may peel off the Ru/TiN interface.e.

• Applied Biological Chemistry
• /
• v.38 no.3
• /
• pp.263-268
• /
• 1995

A study was undertaken to compare degradation patterns of carbofuran in soils between submerged and upland moisture conditions [$3-^{14}C$]Carbofuran was treated in each soils at the rate of 1.0 mg/kg (87.8 kBq $^{14}C/50g$ soil) and the time-course analysis for distribution of radioactivity and degradation products were conducted. Differences in the pathway and rate of carbofuran degradation in soils were observed between submerged and upland moisture conditiona major degradation being hydrolysis at 7-C position and oxidation at 3-C position, respectively. Carbofuran showed less persistence in soils of higher moisture contents A significant portion, $24{\sim}39%$ of the total radioactivity, resided in soils as nonextractable residues at 60 days after treatment The nonextractable radioactivity was mainly located in soil organic matter, fulvic acid, humic acid and humin factions Gel filtration chromatography confirmed the incorporation of carbofuran and its degradation products into the organic matter.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.5
• /
• pp.322-331
• /
• 2017

Hydrogen evolution reaction(HER) was studied over $Ni_4Cr$ nanofibers(NFs) prepared by electrospinning method and oxidation/reduction heat treatment for alkaline water electrolysis. The physicochemical and electrochemical properties such as average diameter, lattice parameter, HER activity of synthesized $Ni_4Cr$ NFs could be modified by proper electrospinning process condition and reduction temperature. It was shown that $Ni_4Cr$ NFs had average diameter from 151 to 273 nm. Also, it exhibited the overpotential between 0.419 V and 0.526 V at $1mA/cm^2$ and Tafel slope of -334.75 mV to -444.55 mV per decade in 1 M KOH solution. These results indicate that $Ni_4Cr$ NFs with reduction heat treatment at $600^{\circ}C$ show thinnest diameter and highest HER activity among the other catalysts.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.101-101
• /
• 2010

ZnO shows a direct band gap of 3.37eV, large exciton binding energy (~60 meV), high oxidation ability, high sensitivity to many gases, and low cost, and it has been used in various applications such as transparent electrodes, light emitting diodes (LEDs), gas sensors and photocatalysts. Among these applications ZnO as photocatalyst has considerably attracted attention over the past few years because of its high activities in removing organic contaminants generated from industrial activities. In this research, ZnO nanoparticles were synthesized by spray-pyrolysis method using the zinc acetate dihydrate as starting material at synthesis temperature of $900^{\circ}C$ with concentration varied from 0.01 to 1.0M. The physical and chemical properties of the synthesized ZnO nanoparticles were examined by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Fourier Transformation Infrared (FT-IR), and UV-vis spectroscopy. The Miller indices of XRD patterns indicate that the synthesized ZnO nanoparticles showed a hexagonal wurtzite structure. With increased precursor concentration, a primary, secondary particle sizes of ZnO nanoparticles increased by 0.8 to $1.5{\mu}m$ and 15 to 35nm, and their crystallinity was improved. Methyleneblue (MB) solution ($1{\mu}M$) as a test comtaminant was prepared for evaluating the photocatalytic activities of ZnO nanoparticles synthesized in different precursor concentration. The results show that the photocatalytic efficiency of ZnO nanoparticles was gradually enhanced by increased precursor concentration.

• Journal of Microbiology
• /
• v.43 no.4
• /
• pp.325-330
• /
• 2005

Rhodococcus sp. strain YU6 was isolated from soil for the ability to grow on o-xylene as the sole carbon and energy source. Unlike most other o-xylene-degrading bacteria, YU6 is able to grow on p-xylene. Numerous growth substrate range experiments, in addition to the ring-cleavage enzyme assay data, suggest that YU6 initially metabolizes 0- and p-xylene by direct aromatic ring oxidation. This leads to the formation of dimethylcatechols, which was further degraded largely through meta-cleavage path-way. The gene encoding meta-cleavage dioxygenase enzyme was PCR cloned from genomic YU6 DNA using previously known gene sequence data from the o-xylene-degrading Rhodococcus sp. strain DK17. Subsequent sequencing of the 918-bp PCR product revealed a $98\%$ identity to the gene, encoding meth-ylcatechol 2,3-dioxygenase from DK17. PFGE analysis followed by Southern hybridization with the catechol 2,3-dioxygenase gene demonstrated that the gene is located on an approximately 560-kb megaplasmid, designated pJY J1

• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.526-530
• /
• 2011

Furan-2,5-dicarboxylic acid (FDCA) was synthesized by $KMnO_4$ oxidation of 2,5-dihydroxymethylfuran(DHMF) derived from biomass. Polyesters were synthesized by esterification and polycondensation of FDCA with various diols(ethane-1,2-diol, propane-1,3-diol, butane-1,4-diol, hexane-1,6-diol, decane-1,10-diol). The composition of polyesters was characterized by using $^1H$ NMR. Thermal properties of the polyesters were characterized by DSC and TGA. Intrinsic viscosities(IV) of the polyesters were measured to be 0.78~1.2 dL/g comparable with IV of commercial poly(ethylene terephthalate)(PET). As the chain lengths of diols increased, Young's modulus and strength decreased and elongation-to-break generally increased. Young's modulus and strength of the polyesters were measured to be 3551 MPa and 103 MPa, respectively, comparable with commercial PET.

• Korean Journal of Microbiology
• /
• v.53 no.4
• /
• pp.309-315
• /
• 2017

Most of acidophiles are found in the various low pH environments and affect to metal cycle through oxidation and reduction reactions. The present study was carried out above 50 strains as acidophiles isolated from acidic soils of exhausted mine and Jeju Gotjawal. Finally, total 19 strains obtained and were tentatively identified based on comparative similarity analysis for 16S rRNA gene sequence and physiological characterizations. These isolates belonged to Gammaproteobacteria (6 strains), Actinobacteria (5 strains), Betaproteobacteria (4 strains), Alphaproteobacteria (2 strains), and Bacilli (2 strains). We observed that these isolates can grow under low pH culture condition. This case study for analysis physiological characterizations of indigenous microorganisms in acidic soil might provide basic information on useful application.