• Journal of Satellite, Information and Communications
• /
• v.11 no.1
• /
• pp.1-5
• /
• 2016

In this paper, High Power Pulsed Amplifier with wide-band characteristic is implemented for L-band Navigational Aid(NAVAID). Due to the characteristics of L-Band NAVAID, implemented SSPA is demanded characteristics of high RF power, high linearity and high efficiency. Therefore, in this paper, efficiency characteristic is improved by modified class F technique. And linearity characteristic is improved by balance structure using hybrid coupler, $2^{nd}$ & $3^{rd}$ harmonic trap and anti-phase technique using non-linear characteristics of drive amplifier. Implemented SSPA shows that bandwidth of 300MHz, RF Output power of 1.5KW and efficiency of 55%.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.739-742
• /
• 1999

This study is to increase capability of the DC/DC converter (for PCS) in miniaturizing, stabilizing by locating an inductor with the structure of multi layer on to the glass/ceramic circuit board. When the DC/DC converter is stimulated. the characteristic operation of PWM switching circuit, losses. output power to input power, stability, efficiency and interfaces inside of control circuit and convener circuit are to be distinguished. The process would make it able to develop the techniques of designing and manufacturing of the converter of next generation.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.128-133
• /
• 1994

This paper proposes a new TTL-to-CMOS converter which has low power dissipation. This converter has no static power dissipation for typical TTL output voltage levels. The simulatio result shows that the power dissipation is reduced to about 1/20 of conventional level converter using CMOS inverters. It also has hysteresis due to the positive feedback which makes the converter noise immune. The logic threshold voltages in the hysteresis characteristic can be optimized by changing the size ratios of the transistors.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.185-188
• /
• 2001

This paper proposes an error amplifier circuit using OTA(Operational Transconductance Amplifier) which is the main constituent element in pulse width modulation circuit. The proposed OTA error amplifier circuit is featured by simple circuit configuration, excellent high frequency characteristics and bias current controlled output. Through the experiment of pulse width modulation circuit, the validity of the operation of the OTA error amplifier circuit is verified.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.49-54
• /
• 2008

In cryptosystems based on finite fields, a modular multiplication operation is the most crucial part of finite field arithmetic. Also, in multipliers with resource constrained environments, bit-serial output structures are used in general. This paper proposes two efficient bit-serial output multipliers with the polynomial basis representation for irreducible trinomials. The proposed multipliers have lower time complexity compared to previous bit-serial output multipliers. One of two proposed multipliers requires the time delay of $(m+1){\cdot}MUL+(m+1){\cdot}ADD$ which is more efficient than so-called Interleaved Multiplier with the time delay of $m{\cdot}MUL+2m{\cdot}ADD$. Therefore, in elliptic curve cryptosystems and pairing based cryptosystems with small characteristics, the proposed multipliers can result in faster overall computation. For example, if the characteristic of the finite fields used in cryprosystems is small then the proposed multipliers are approximately two times faster than previous ones.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.5
• /
• pp.20-25
• /
• 1982

A realization method of the microwave oscillator is proposed by the inherently stable transistor with a cavily resonator feedback loop. The real Part of the output impedance of the inherently stable bipolar transistor can be made to be negative at the resonance frequency by the high-Q cavity feedback loop, and the oscillation condition can be obtained with the matching section of the load. In this work the microwave transistor oscillator is realized with a silicon bipolar transistor HXTR 2101 and a reentrani cavity, and characteristic of the output power 10m Watts at 2.33 GHz osc. frequency can be verified experimentally.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.6
• /
• pp.31-39
• /
• 1979

This paper dealt with a general the Qrem of frequency doubler. By summarizing the frequency doubler theorems, a new frequency doubter theorem can be derived. "In time invarient system, if the input waveform shows the half-wave symmetric characteristic and if the even function is the mapping from input into output, then the frequency of output is at least 2-times of input frequency." By the theorem, this paper propose a new wide band square wave frequency doublerusing negative resistance circuit.e circuit.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.185-192
• /
• 1998

This paper presentsa new currnet control method ofthe six-pulse cycloconverter which is used as a variable speed drive system of a large capacity ac mortor. For a high performance control as a vector control, it is necessary that the output current control ofthe power converter has a good characteristic in transient state. A new proposed current control method is that the output current of a cycloconverter is followed after the current reference directly as fast as possible under any condition. Simultion results for the proposed new current control method are shown and its validity of the proposed method is confired.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2006.06a
• /
• pp.85-88
• /
• 2006

Many control techniques have been proposed in order to improve the control performance of the discrete-time domain control system. In the position control system, the output of a controller is generally used as the input of a plant but the undesired noise is include in the output of a controller. In this paper, the neuro-network 2-DOF PID Controller is designed by a neural network and the gains of this controller are adjusted automatically by the back-propagation algorithm of the neural network when the response characteristic of system is changed under a condition.

• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.103-106
• /
• 2016

PWM buck converters usually use a type-III error amplifier. Since this amplifier has a big capacitor with slow slew rate, they can generate an unintended large overshoot/undershoot at the output when a large load current change occurs. They can also respond slowly by varying the reference voltage. In order to increase battery lifetime, power supplies require a various range of load current and output voltage. PWM buck converter also should have a characteristic of both fast load response and reference tracking. This paper surveys a few recent techniques for reducing the settling time, and discusses their merits and limitations.