• Economic and Environmental Geology
• /
• v.42 no.2
• /
• pp.107-120
• /
• 2009

Spacial variation in organic components and temporal variation in the origin was examined through the organic geochemical (TC, TN, TS, $CaCO_3$, TOC, C/N, and $\delta^{13}C$) and pyrolysis analysis (HI, OI, and Tmax) in the core sediments which were acquired in the continental shelf of the South Sea close to Seomjin River. Levels of TC, TN, and TS show relatively low and constant in the core SJ03 located close to the Seomjin River mouth, while those are increased a little with being varied with low amplitude in the core SJ02 and SJ04 acquired at the middle of inner shelf area. They fluctuated with high amplitude in the core SJ01 and SJ05 near to the outer boundary of inner shelf. The vertical characteristics of organic components in the core SJ01 acquired at the outer boundary show that the area has undergone distinctly the environmental change at 9.0 kyr B.P. After 9.0 kyr B.P., Levels of TC, TOC, TN, $CaCO_3$, $\delta^{13}C$, HI, and Tmax are rapidly increased, while C/N and or are significantly decreased. Even though the contents of organic components are not high, such a changes reflect that the terrigenous organic matters were predominant before 9.0 kyr B.P due to the influence of Seomjin River, but after then, the marine organic matters have dominated due to the inflow of the Tshusima current.

• Applied Microscopy
• /
• v.32 no.3
• /
• pp.213-222
• /
• 2002

Histology and ultrastructure of the mantle epidermis in the ark shell, Scapharca broughtonii are described using light and electron microscopy. The mantle of the ark shell is composed of outer epidermis, connective tissue and inner epidermis. Both epidermis are simple and consists of supporting cells, ciliated cells and secretory cells. Connective tissue is composed of mainly collagen and muscle fibers. The supporting cells in the inner epidermis are usually columnar and covered with microvilli. The ciliated cell have cilia and microvilli on the free surface, and numerous tubular mitochondria are observed in the apical cytoplasm. Secretory cells are mainly observed in the outer epidermis, and it can be divided into four types of A, B, C and D with morphological features of the secretory granules. Type A cells of mucous cell are found in the marginal and central mantle. And these cells contains numerous secretory granules of non-bounded and low electron density. Type B cells contains numerous rough endoplasmic reticula, well-developed Golgi complex and secretory granules of membrane-bounded and high electron density. Secretory granules of type C cells are divided into fibrous core layer and homogeneous peripheral layer. Type D cells are found in the outer epidermis of the central and umbonal mantle. And secretory granules of these cells are divided into homogeneous core layer and granular peripheral layer. This results suggest that the outer and inner epidermis of the mantle are related with shell formation and cleaning of the mantle cavity, respectively.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.195-197
• /
• 1993

In this paper, a planar vibratory gyroscope is designed and fabricated in macro model. Elementary experiment and test are done for micro model. This gyroscope has a double gimbal structure with an active dimension $80{\times}120{\times}1\;mm^3$. Outer gimbal vibration is generated by electromagnetic force using ferrite E-core wounded by coil. Inner gimbal vibration is detected by inductive sensor. It is demonstrated' that mechanical and electrical symmetries are important for improvement of vibratory gyroscope.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.277-280
• /
• 2001

The proposed clock generator lowers the operating frequency in a system core though it keeps data bandwidth high because it has a multiphase clocking architecture. Moreover. it has a dual loop which is comprised of an inner analog phase generation loop and outer digital phase control loop. It has both advantages of DLL's wide operating range and DLL's low jitter The proposed design has been demonstrated in terms of the concept and Hspice simulation. All circuits were designed using a 0.25${\mu}{\textrm}{m}$ CMOS process and simulated with 2.5 V power supply.

• Applied Microscopy
• /
• v.47 no.2
• /
• pp.70-74
• /
• 2017

In the case of genus Nothobranchius, Nothobranchiidae, the morphology of fertilized eggs and ultrastructures of fertilized egg envelopes have been reported in only two fishes. Therefore it is hard for sure to these morphological characteristics show genus specificity because of lower research samples. So, we studied the morphology of fertilized egg, and compared the ultrastructures of outer surface, micropyle, and section of fertilized egg envelopes under the light and electron microscopes from the other two species, Nothobranchius foerschi and Nothobranchius rachovii, Nothobranchiidae to find out whether these structures have the species specificity or not. Both fertilized eggs were spherical, demersal and adhesive, and have a large oil droplet. The adhesive whip-like structures were distributed on the outer surface of egg envelope, and a micropyle located on the animal pole. The fertilized egg envelope consisted of two distinct layers: an outer electron-dense layer with adhesive structures and an inner lamellae layer in both species. The external shapes of fertilized egg and ultrastuctures of outer surface, micropyle, and section of fertilized egg envelope have same structure including results before. Our data indicate that these morphological characteristics of fertilized egg and fertilized egg envelope show genus Nothobranchius specificity.

• The Journal of the Korean dental association
• /
• v.54 no.1
• /
• pp.21-26
• /
• 2016

The requirements for the successful treatment of all-ceramic restorations are not so different from the ones of conventional restorations. "The provisional restoration followed by an adequate tooth reduction" and "the accurately fitting prostheses with corresponding to final impression" can be the examples of them. Nevertheless, the one which all-ceramic restorations are distinguished from conventional restorations is the additional procedure of so called "bonding". In addition to the application of resin cement between "inner surface of restoration and outer surface of abutment", bonding technology can be also applied to the treatment process of "Post and Core" in particular if the abutments are non-vital teeth. Core build-up for all-ceramic crown is conducted with fiber post and tooth colored composite by considering the properties of the restorations transmitting light. I would like to share my clinical experience about "silica based ceramic and non silica based ceramic restoration.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.40-42
• /
• 2008

This integrated magnetic (IM) transformer is proposed for a phase shifted full bridge (PSFB) converter with zero voltage switching (ZVS). In a new IM transformer, the transformer is located on the center leg of E-core and the output inductor is wound on two outer legs. The proposed circuit is analyzed electrically and magnetically. An E-core is redesigned and implemented. The proposed IM transformer is experimentally compared with the conventional one through a 1.2kW prototype converter.

• Carbon letters
• /
• v.12 no.4
• /
• pp.218-222
• /
• 2011

Well-aligned multi-walled carbon nanotubes (MWCNTs) were successfully synthesized by catalytic chemical vapor deposition using a hydrogen sulfide ($H_2S$) additive onto Al/Fe thin film deposited on Si wafers. Transmission electron microscopy images indicated that the as-grown carbon products were thin MWCNTs with small outer diameters of less than 10 nm. $H_2S$ plays a key role in synthesizing thin MWCNTs with a large inside hollow core. The well-aligned thin MWCNTs showed a low turn-on voltage of about 1.1 V/${\mu}m$ at a current density of 0.1 ${\mu}A/cm^2$ and a high emission current of about 1.0 mA/$cm^2$ at a bias field of 2.3 V/${\mu}m$. We suggest a possible growth mechanism for the well-aligned thin MWCNTs with a large inside hollow core.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.2
• /
• pp.324-330
• /
• 2013

The dispersion of acoustic noise during the turn-on and turn-off switching of HEV(hybrid electric vehicle) relay was experimentally analyzed to identify the reason for the dispersion of noise level. An effective method was proposed to reduce the dispersion of noise level. First, a method to wrap the side of moving core with a tape was adopted to reduce the transverse vibration. It enabled the moving core to make a consistent motion and reduce the dispersion of noise level from switching operation of relay. Second, the dispersion of noise level from vibration transmission of parts such as the outer frame and yoke caulking part of relay were tested to find out main sources. From this result, it was identified that the yoke caulking part made inconsistent transient vibration and noise dispersion.

• Nuclear Engineering and Technology
• /
• v.31 no.4
• /
• pp.408-422
• /
• 1999

To reduce the fast neutron fluence which deteriorates the RPV integrity, additional shields were assumed to be installed at the outer core structures of the Kori Unit 1 reactor, and its reduction effects were examined. Full scope Monte Carlo simulation with MCNP4A code was made to estimate the fast neutron fluence at the RPV. An optimized design option was found from various choices in geometry and material for shield structure. It was expected that magnitude of fast neutron fluence would be reduced by 39% at the circumferential weld of the RPV, resulting in extension of plant lifetime by 4.6 EFPYs based on the criterion of PTS requirement It was investigated that the nuclear characteristics and thermal hydraulic factors at the internal core were only negligibly influenced by the installation of additional shield structure.