• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권1호
• /
• pp.151-161
• /
• 2014

In this study, an experimental investigation has been made of the applicability of outer-layer vertical blades to real ship model. After first devised by Hutchins and Choi (2003), the outer-layer vertical blades demonstrated its effectiveness in reducing total drag of flat plate (Park et al., 2011) with maximum drag reduction of 9.6%. With a view to assessing the effect in the flow around a ship, the arrays of outer-layer vertical blades have been installed onto the side bottom and flat bottom of a 300k KVLCC model. A series of towing tank test has been carried out to investigate resistance (CTM) reduction efficiency and improvement of stern wake distribution with varying geometric parameters of the blades array. The installation of vertical blades led to the CTM reduction of 2.15~2.76% near the service speed. The nominal wake fraction was affected marginally by the blades array and the axial velocity distribution tended to be more uniform by the blades array.

• 한국실내디자인학회논문집
• /
• 제18권6호
• /
• pp.176-183
• /
• 2009

This study was intended to define the spatial concept of the boundary structure of the architectural space as well as evaluate the Hyangdan which well represents the features of Korean traditional building in such a way of reviewing the building structure of Korean traditional residential space. The boundary is categorized into visible boundary and invisible boundary which was also functionally classified into the features of isolating, passing, mediating and overlapping. The major elements comprising the boundary structure was analyzed by the characteristic of the pattern so as to define them as the concept of surrounding, duality, hierarchism, continuity and overlapping. Based on such concepts, a boundary structural characteristics of Hyangdan were reevaluated and outlined as follows. The surrounding feature was seen through the outer side of the structure surrounded, two courtyards and eaves, and a duality showing both the closure of main house and openness of detached house was seen through the characteristics of surrounding structure. And the continuous activities toward the inner room and the empty space to link them in a systematic way and repeatedly aligned rooms reveal the overlapping as continuous and transitional space. And finally, an elevated stylobate demonstrates the hierarchical features of the structure.

• 한국소음진동공학회논문집
• /
• 제12권4호
• /
• pp.280-286
• /
• 2002

It has been long suspected that the transition region may give rise to local pressure fluctuations and radiated sound that are different from those created by the fully-developed turbulent boundary layer at equivalent Reynolds number. Experimental investigation described in this paper concerns the characteristics of pressure fluctuations at the transition. Flush-mounted microphones and hot wires are used to measure the pressure fluctuations and local flow velocities within the boundary layer in the low noise wind tunnel. From this experiment we could observe the spatial and temporal development process of T-S wave using Wigner-Ville method and find the relations between the characteristic frequency of T-S wave and free stream velocity and the boundary layer thickness based on nondimensional pressure spectra scaled on outer variables.

• 천문학회지
• /
• 제35권2호
• /
• pp.75-85
• /
• 2002

We present N-body simulations of globular clusters including gravitational field of the Galaxy, in order to study effects of tidal field systematically on the shape of outer parts of globular clusters using NBODY6. The Galaxy is assumed to be composed of central bulge and outer halo. We mvestigate the cluster of multi-mass models with a power-law initial mass function (IMF) starting with different initial masses, initial number of particles, different slopes of the IMF and different orbits of the cluster. We have examined the general evolution of the clusters, the shape of outer parts of the clusters, density profiles and the direction of tidal tails. The density profiles appear to become somewhat shallower just outside the tidal boundary consistent with some observed data. The position angle of the tidal tall depends on the location in the Galaxy as well as the direction of the motion of. clusters. We found that the clusters become more elongated at the apogalacticon than at the pengalacticon. The tidal tails may be used to trace the orbital paths of globular clusters.

• 대한기계학회논문집B
• /
• 제21권4호
• /
• pp.551-561
• /
• 1997

Mixed convection of air in a horizontal concentric cylindrical annulus is investigated numerically. Isothermal boundary conditions are prescribed at the inner and outer cylinders, with the inner cylinder being warmer. The forced flow is induced by the outer cylinder which is rotating slowly with constant angular velocity with its axis at the center of the annulus. The effect of the forced flow on the flow pattern and heat transfer of natural convection is investigated for the annulus of (inner-cylinder radius/gap width) = 1. There appear two eddies, one eddy or no eddy according to the Rayleigh and Reynolds numbers. Map of the three flow regimes is constructed on the Ra-Re plane. (author). 28 refs., 9 figs., 2 tabs.

• Composites Research
• /
• 제16권1호
• /
• pp.34-41
• /
• 2003

두꺼운 필라멘트 와인딩 복합재료의 경화 공정의 최적화를 위만 모델이 제안되었다. 스마트 경화는 중심 축 부분과 바깥 쪽의 온도 조건을 같게 하는 방법과 중심 푹 쪽의 온도가 약간 높게 조절하여 경화 반응이 안쪽부터 시작될 수 있도록 하는 방법의 두 가지로 제안되었으며, 이는 잔류응력을 줄이기 위함이다.

• 터널과지하공간
• /
• 제19권6호
• /
• pp.498-506
• /
• 2009

복공식 압축공기 저장 터널의 라이닝은 고압의 공기압을 견뎌야 하므로 일반 도로터널 라이닝의 경우와는 다른 접근법에 의해 안정성 해석이 수행될 필요가 있다. 이에 따라 이 연구에서는 원통형 실린더의 탄성해 및 탄소성 해를 기반으로 하여 복공식 압축공기 저장터널에 설치되는 콘크리트 라이닝의 안정성 해석법이 제안되었다. 탄성해석의 경우 라이닝 내측 경계면의 항복개시조건을 라이닝 파괴기준으로 설정하였다. Mohr-Coulomb 항복기준을 적용한 탄소성 해석의 경우 최대 허용 항복 깊이까지 항복영역이 확대되는 조건을 파괴기준으로 설정하였다. 제안된 방법을 이용한 안정성해석 결과 라이닝의 내측 공기압과 배면하중의 상대적 크기가 라이닝의 안정성에 큰 영향을 미치는 것으로 나타났다. 상대적으로 추정이 힘든 배면하중의 정확한 예측이 라이닝 안정성 평가에서 매우 중요한 것으로 나타났다. 이에 따라 배면하중의 크기에 큰 영향을 주는 라이닝 설치시점 선택의 중요성이 강조되었다.

• 정보처리학회논문지B
• /
• 제17B권5호
• /
• pp.375-380
• /
• 2010

객체 윤곽을 추출하는 대부분의 기존 방법들은 단일객체의 윤곽검출에 대해 연구하였다. 그러나, 실 세계에서는 복수객체가 일반적이다. 본 논문에서 제안한 복수객체 윤곽추출 알고리즘은 2 단계로 구성된다. 첫 번째 단계는 외적 및 내적을 사용하여 초기에 복수객체를 포함한 윤곽을 고속으로 분리하고 연결하여 각각이 윤곽이 단일 개체만을 포함하는 방법을 제안한다. 두 번째 단계는 각각의 윤곽에 포함된 단일 객체의 윤곽을 추출하는 개선된 능동윤곽모델 알고리즘을 설명한다. 여러 실험영상에 대한 실험결과는 다른 방법과 비교하여 속도가 빠르며 정확하게 윤곽을 추출한다.

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1794-1804
• /
• 1993

The thermal stress intensity factors for interface cracks of Griffith and symmetric lip cusp types under vertical uniform heat flow in a finite body are calculated by boundary element method. The boundary conditions on the crack surfaces are insulated or fixed to constant temperature. The relationship between the stress intensity factors and the displacements on the nodal point of a crack tip element is derived. The numerical values of the thermal stress intensity factors for interface Griffith crack in an infinite body and for symmetric lip cusp crack in a finite and homogeneous body are compared with the previous solutions. The thermal stress intensity factors for symmetric lip cusp interface crack in a finite body are calculated with respect to various effective crack lengths, configuration parameters, material property ratios and the thermal boundary conditions on the crack surfaces. Under the same outer boundary conditions, there are no appreciable differences in the distribution of thermal stress intensity factors with respect to each material properties. But the effect of crack surface thermal boundary conditions on the thermal stress intensity factors is considerable.

• 대한조선학회지
• /
• 제22권3호
• /
• pp.9-18
• /
• 1985

The numerical calculation for solving boundary-value problem related to potential flows with a free surface is carried out by application of the localized finite element method. Only forced motion of 2-D body in infinitely deep fluid is considered, although this schemes is equally applicable to any first order time-harmonic problems of similar nature. The infinite domain of the fluid is separated into the inner flow field and the outer flow field with common inter-surface boundary. The finite element method is applied to obtain the solution in the inner flow field and the Green functions are utilized to represent the solution in the outer flow field. At the inter-surface boundary, the continuity of the value of potential and the normal derivative of the potential(i.e. matching condition) is conserved. The present method has better computational efficiency than the previous LFEM and the integral equation method of Frank. This enhanced computational efficiency is presumably due to the fact that the present method gives a symmetric coefficient matrix and requires less computational time in calculating the influence coefficient matrix of Green function than the integral equation method. And the irregular frequency desen't exist because the uniqueness of the solution is assured by the such that the exact free surface condition is satisfied on the boundary of the localized finite element region(i.e. inner region). As an example of the above method, the hydrodynamic forces for the circular cylinder and the rectangular cylinders are calculated. In the computed results, the small number of singularity distribution segments($3{\sim}6$) give good result relative to Ursell's and Vugts'.