Browse > Article

A Study on Smart Cure of Filament Wound Composite Flywheel  

이도훈 (서울대학교 기계항공공학부 대학원)
김선경 (서울대학교 기계항공공학부)
김동진 (한양대학교 기계설계공학과 대학원)
이우일 (서울대학교 기계항공공학부)
하성규 (한양대학교 기계산업공학부)
Publication Information
Composites Research / v.16, no.1, 2003 , pp. 34-41 More about this Journal
Abstract
A cure process control model was proposed to optimize the curing process of thick filament wound structure. There are two types of smart cure, one is that the boundary conditions of the hollow cylinder are same between inner surface and outer surface, and the other is that inner surface temperature is slightly higher than outer surface to initiate cure reaction from the inner side to the outer side to reduce residual stress.
Keywords
Citations & Related Records
연도 인용수 순위
  • Reference
1 Optimization of the curing Process of Filament Wound Composites /
[ A. C. Loos;S. Nagendra ] / 34th International SMAPE Symposium
2 Process-Induced stress and Deformation in Thick-Section Thermoset Composite Laminates /
[ T. A. Bogetti;J. W. Gillespie, Jr. ] / Journal of Composite Materials
3 /
[ S. W. Tsai;H. T. Hahn ] / Introduction to Composite Materials
4 Cure Kinetics and Viscosity of Fiberite 976 Resin /
[ M. R. Dusi;W. I. Lee;P. R. Ciriscioli;G. S. Springer ] / Journal of COmposite Materials
5 Optimal curing for Thermoset Matrix Composites : Thermochemical Considerations /
[ M. Li;Q. Zhu;P. H. Geubelle;C. L. Tucker ] / Polymer Composites
6 An Expert System for Autoclave curing of Composites /
[ P. R. Criscioli;G. S. Springer;W. I. Lee ] / Journal of Composite Materials