• Journal of Microbiology and Biotechnology
• /
• v.23 no.3
• /
• pp.289-296
• /
• 2013

Cryptomonads are unicellular, biflagellate algae. Generally, cryptomonad cells cannot be preserved well because of their fragile nature, and an improved methodology should be developed to identify cryptomonads from natural habitats. In this study, we tried using several cytological fixatives, including glutaraldehyde, formaldehyde, and their combinations to preserve field samples collected from various waters, and the currently used fixative, Lugol's solution was tested for comparison. Results showed that among the fixatives tested, glutaraldehyde preserved the samples best, and the optimal concentration of glutaraldehyde was 2%. The cell morphology was well preserved by glutaraldehyde. Cells kept their original color, volume, and shape, and important taxonomic features such as furrow/gullet complex, ejectosomes, as well as flagella could be observed clearly, whereas these organelles frequently disappeared in Lugol's solution preserved samples. The osmotic adjustments and buffers tested could not preserve cell density significantly higher. Statistical calculation showed the cell density in the samples preserved by 2% glutaraldehyde remained stable after 43 days of the fixation procedure. In addition, DNA was extracted from glutaraldehyde preserved samples by grinding with liquid nitrogen and the 18S rDNA sequence was amplified by PCR. The sequence was virtually identical to the reference sequence, and phylogenetic analyses showed very close relationship between it and sequences from the same organism. To sum up, the present study demonstrated that 2% unbuffered glutaraldehyde, without osmotic adjustments, can preserve cryptomonads cells for identification, in terms of both light microscopy and phylogenetic analyses based on DNA sequences.

• Korean Journal of Materials Research
• /
• v.32 no.4
• /
• pp.230-236
• /
• 2022

The formation behavior of a passive state film on the surface of STS304 in electrolytic solution was analyzed to determine its metallic ion composition. The properties of passive state films vary depending on the Fe and Cr ions in the electrolytic solution. It was observed that the passive state film surface became flat and glossy as the concentration of Fe and Cr ions in the electrolytic solution increased. The corrosion resistance property of the passive state film was proportional to the amount of Fe and Cr in the electrolytic solution. An initial passive state film with high Fe concentration was formed on the surface of STS304 during early electrolytic polishing. Osmotic pressure of Fe ions occurs between the passive state film and electrolytic solution due to the Fe ion concentration gradient. The Fe in the passive state film is dissolved into the electrolyte, and Cr fills up the Fe ion vacancies. As a result, a good corrosion-resistant floating film was formed. The more Fe ions in the electrolytic solution, the faster the film is formed, and as a result, a flat passive state film containing a large amount of Cr can be formed.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.26 no.1
• /
• pp.16-21
• /
• 2024

Green manure crops have a variety of benefits, including improving soil fertility, removing soil salinity, enhancing soil aeration and moisture regulation, reducing the use of chemical fertilizers, reducing nitrous oxide emissions, reducing herbicide use through weed-suppressive effects, promoting agricultural ecosystem protection and carbon dioxide absorption capacity. To find ways to increase the germination rate of legumes and green manure crop seeds, which are imported in large quantities every year. It was carried out that two seed priming methods, osmotic priming and heat treatment, and compared their effects. Heat treatment was treated for 10 minutes at 40℃ or 60℃, followed by rinsing with water. Osmotic priming was applied for 30 seconds in a saline solution with a specific gravity of 1.13. Overall, there was no significant difference in the final germination rate, but it was found that osmotic priming and heat treatment affected the germination speed. However, applying heat treatment and osmotic priming simultaneously did not affect the germination characteristics. Therefore, it is suggested that heat treatment and osmotic priming can increase the germination speed of soybean and green manure crops.

• Reproductive and Developmental Biology
• /
• v.37 no.4
• /
• pp.213-217
• /
• 2013

The objective of this study was to investigate the effect of bacterial contamination on elapsed time after preservation on boar semen. Known numbers of Escherichia coli (E. coli) were inoculated to freshly ejaculated semen and sperm parameters such as viability, motility, agglutination, acrosome integrity and hypo-osmotic swelling test were performed during 7 days of liquid preservation. Semen samples were prepared using antibiotic free BTS extender and 4 different levels of E. coli were treated to semen with following concentrations; 3,000, 5,000, 7,000, 10,000 CFU/ml of sperms. Semen samples were preserved at $17^{\circ}C$ for 7 days in semen storage until analyzed. Aliquots were subjected to measure the sperm viability, motility and agglutination using computer assisted sperm analysis (CASA) system, acrosome integrity was performed using chlortetracycline (CTC) staining method and hypo-osmotic swelling test was performed using hypotonic solution from day 1 (day of semen collection) to 7. Detrimental effects on sperm motility and viability were observed 3 days after preservation at the level of 5,000 CFU/ml (p<0.05). Percentage of sperm abnormality was higher (p<0.05) in over 5,000 CFU/ml groups. Sperm agglutination rate was also significantly higher (p<0.05) in groups of 5,000 and 7,000 CFU/ml. The rate of acrosome reacted sperm was higher as preservation time goes in all the samples but the pattern was clearly higher among E. coli contaminated groups (p<0.05). The sperm membrane integrity in terms of hypo-osmotic test, E. coli affects little compared to other sperm parameters. The deleterious effects observed due to the bacterial contamination in semen suggest that importance of hygiene protocol to minimize the bacterial contamination during semen collection and processing.

• Food Engineering Progress
• /
• v.13 no.1
• /
• pp.24-31
• /
• 2009

The structural and physicochemical properties of dried aloe vera gel by DIS (dewatering impregnation soaking) process under optimum conditions were investigated. FT-IR spectra for dried samples of DIS aloes showed the typical patterns of standard aloe polysaccharide, and surface structures by SEM (scanning electron microscopy) were similar to a gel-like structure. In case of physicochemical properties of dried aloe samples by DIS process, solubilities and swelling powers of control (not osmotic treated aloe), DIS (S) and DIS (G), samples treated by osmotic solution of 60% sucrose/0.25% NaCl and 50% glucose/0.5% NaCl, were 48.3-57.3% and 8.3-11.7%, respectively, showing no significant differences among samples, but swelling power of DIS (PEG), sample treated by using 50% polyethylene glycol as an osmotic agent was about 5 times higher that of control. Also, water holding capacities of control, DIS (S) and DIS (G) were similar to each other, but that of DIS (PEG) was about 5 times higher that of control. Oil holding capacities of control and DIS aloes maintained the 50.9-86.4% levels of water holding capacities showing no significant differences among samples. Rehydration ratio of DIS (PEG) aloes were significantly dependent on the temperature of rehydrated solvent (water), and rehydration ratio of not-fileted aloe was about two folds higher than that of fileted aloe.

• Korean Journal of Plant Resources
• /
• v.11 no.1
• /
• pp.93-100
• /
• 1998

This study was to investigate the dry weight, the amount of Na+ and K+ water potential and leaf photosynthesis rate in plants for determining the salt tolerance mechanism in rice cultivars on soil and solution culture with NaCl. The results obtained in this study are summarized as follows ; In general, rice cultivars, cv. Tetep and Jinbu, having high salt tolerance in ID(identified on dry matter production level) showed the higher salt tolerance in RGR (relative growth rate), compared with rice cultivars(cv. Nonglim 41ho, Dunraebyeo and Sobackbyeo) having low salt tolerance. The contents of Na in rice differed depending on culivars and plant parts. Tetep contained 2.9times higher amounts of Na+ than leaf blade and root part. High salt tolerance cultivar Obongbyeo showed a larger decrease in osmotic potential than low salt tolerance cultivar Dunraebyeo suggesting that osmotic adjustment was developed under salt stress conditions in a salt tolerant cultivar . In order to know the IY(identified on grain yeild level using rice cultivars having different salt tolerance the capacity of photosyntheiss was investigated. The capapcity of photosynthesis in cv. Tetep and Obongbyeo having high salt tolerance was much higher that in cv.Dunraebyeo and Nonglim 41 having low salt tolerance.

• Journal of the Korean Chemical Society
• /
• v.16 no.5
• /
• pp.304-313
• /
• 1972

This paper reports the improvements of the dialysis apparatus and operations since there are some problems to be improved in the dialysis method which is applied to determine the ionic and molecular weight of dissolved particles. The hook gauge was utilized in order to control the surface level of the dialysing solution and the solvent to be equal with the precision of 0.02 mm to minimize the osmotic and filtration effects. An accurate agitation velocity for both solutions was maintained and so was the same temperature for both solutions with ${\pm}0.01^{\circ}C$ precision. The dialysis membrane was fixed uniformly and flatly on one end of the dialysis cylinder by using a newly developed ring. The volume change of the dialysing solution during the dialysis was reduced to the range of -1.62 ~ +0.92%. Optimum duration of dialysis was searched from the relation between the osmotic and filtration effect and the pore size of the membrane.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.4
• /
• pp.317-324
• /
• 2018

SWRO-PRO hybrid desalination technology is recently getting more attention especially in large desalination markets such as USA, Middle East, Japan, Singapore, etc. because of its promising potential to recover a considerable amount of osmotic energy from brine (a high-concentration solution of salt, 60,000 - 80,000 mg/L) and also to minimize the impact of the discharged brine into a marine ecosystem. By the research and development of the core technologies of the SWRO-PRO desalination system in a national desalination research project (Global MVP) supported by Ministry of Land, Infrastructure, and Transport (MOLIT) and Korea Agency for Infrastructure Technology Advancement (KAIA), it is anticipated that around 25% of total energy consumption rate (generally 3 to $4kWh/m^3$) of the SWRO desalination can be reduced by recovering the brine's osmotic energy utilizing wastewater treatment effluent as a PRO feed solution and an isobaric pressure exchanger (PX, ERI) as a PRO energy converter. However, there are still several challenges needed to be overcome in order to ultimately commercialize the novel SWRO-PRO process. They include system optimization and integration, development of efficient PRO membrane and module, development of PRO membrane fouling control technology, development of design and operation technology for the system scaling-up, development of diverse business models, and so on. In this paper, the current status and progress of the pilot study of the newly developed SWRO-PRO hybrid desalination technology is discussed.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.4
• /
• pp.357-361
• /
• 2018

Forward osmosis (FO) process has been attracting attention for its potential applications such as industrial wastewater treatment, wastewater reclamation and seawater desalination. Particularly, in terms of fouling reversibility and operating energy consumption, the FO process is assumed to be preferable to the reverse osmosis (RO) process. Despite these advantages, there is a difficulty in the empirical step due to the lack of separation and recovery techniques of the draw solution. Therefore, rather than using FO alone, recent developments of the FO process have adapted a hybrid system without draw solution separation/recovery systems, such as the FO-RO osmotic dilution system. In this study, we investigated the performance of the hollow fiber FO module according to various operating conditions. The change of permeate flow rate according to the flow rates of the draw and feed solutions in the process operation is a factor that increases the permeate flow rate, one of the performance factors in the positive osmosis process. Our results reveal that flow rates of draw and feed solutions affect the membrane performance, such as the water flux and the reverse solute flux. Moreover, use of hydraulic pressure on the feed side was shown to yield slightly higher flux than the case without applied pressure. Thus, optimizing the operating conditions is important in the hollow fiber FO system.

• Korean Journal of Food Science and Technology
• /
• v.21 no.3
• /
• pp.430-434
• /
• 1989

The effect on pretreatments with sugar and blanching on the quality of dried carrot flake were investigated. The color of carrot flakes soaking in sugar solution for 2 mins $(60^{\circ}C,\;30 Brix)$ after water blanching $(100^{\circ}C,\;10 min)$ was similar to fresh carrots and the carrot flakes contained relatively high carotene and $Cu^{++}$ values. The osmotic dehydration with sugar solution $(80^{\circ}C,\;40\;Brix)$ prior to air drying reduced browning reaction and shrinkage. According to sensory test, no significant difference occured, after osmotic dehydration, among air drying. But there was a significant difference occured air drying after water blanching.