• Journal of Korean Society of Rural Planning
• /
• v.19 no.1
• /
• pp.23-32
• /
• 2013

In the traditional subsistence farming era in Korea, most of small farmer's housing plots in the rural villages had their boundary barriers of which materials being the natural ones provided from nearby places. However, during the rapid industrialization period from 1960s, a traditional type of boundary barriers in the rural villages had been replaced mostly by low-cost factory-made ones, which means absolute loss of their amenity values as a linear part of villagescape. In spite of many study efforts on boundary barriers of traditional rural houses, detailed historical dating on them after 1960s have not tried up to now, which provoked to try this study. Through the direct and in-depth interviews to rural villagers sampled from 21 case villages, it was found that original boundary barriers structure in most of farm houses was made of natural materials like stone, soil, trees and bamboo, but, replaced by cement block structures mostly during Saemaeul Project period. However, although being relatively minority, traditional ones have been preserved up to now mainly in remote mountainous and seashore villages, but was in very low condition. In the overall view, for more than half a century, boundary barriers of farm houses had been left without public or private improvement efforts. In order to enhance their amenity values, more research works should be carried out on positive reassessment of the traditional ones harmonized with multifunctionalities for modern village life.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.4
• /
• pp.865-871
• /
• 2005

The Wenbing tiaobian(온병조변) is the first systematic disease monograph on warm factor disease(온병), written by Wu Jutong(오국통). It was most influenced by the Linzheng zhinan yian(임증지남의안), which was a book of gathering medical case records of Ye tianshi(엽천사). Therefore, there are plenty of quotations from this book in the Wenbing tiaobian. This study investigates the quotations from Linzheng zhinan yian, especially focusing on the way of transformation and correction of the original medical case records on the warm factor disease. The results are as follows: About 104 of 265 provisions in the Wenbing tiaobian were directly quoted from the Linzheng zhinan yian. The provisions quoted from Ye's case records were rearranged according to the categories of the triple burners pattern differentiation(삼초변증) and the causes of warm factor disease. And eve case record was transformed into more general descriptive form in order to put it into the book. For example, the specific figures, and some patients' peculiar symptoms, causes, sex and disease names were omitted. On the other hand, the tongue moss, pulse shape and some symptoms, which were necessary for differentiating patterns, were added. In the case of the formula, some formulas originated from Ye's case records were named newly. And the dose of each herb consisting a formula was determined, and therapeutic principle, taking method and detailed explanation was added to every formula.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.5
• /
• pp.1137-1141
• /
• 2005

This paper is written in order to investigate how Lee Je-Ma changed traditional Zhu Xi's philosophical view on Way(Tao; 道) Virtue(De: 德) Nature(Xing;性) and Imperative(Ming; 命), which was general concepts of his contemporary age, to practical philosophy and created new medical theories of Sasang(4 symbols) science from it. Lee emphasized the true thing which is able to be done in one's living not the concepts of Sasang. So he induced the concepts of Way and Virtue from the easy and simple way(易簡之道) in the Classic of Changes(I'Ching) for the purpose of practice by anyone. Because Nature and Imperative are derived from Way and Virtue in the context logically, human life is virtual in itself, so the substance of Nature and Imperative became equal with Way and Virtue. Herein the names and concepts of original 'Sasang' were substituted to Business(事), Mind(心), Body(身), Thing(物) which is able to be directly related with human being in his daily life. And he explained variously about the responses of Mind and Body of individuals onto Business and Thing. So it could be applied in medical aspects like emotional, symptomatical, characteristic features. Conclusively man is virtual being, so Nature and Imperative in the level of Human being are based on Way and Virtue in the level of Heaven. For that reason the new concepts of Sasang Business. Mind. Body Thing or Heaven. Human. Nature and Imperative were proposed.

• Journal of Korean Society on Water Environment
• /
• v.33 no.6
• /
• pp.769-779
• /
• 2017

Nutrient (i.e., nitrogen and phosphorus) budgets are required under a 'Livestock Excreta Survey'. A nutrient budget is one of the agri-environmental indicators that calculates the difference between the inputs and outputs of the amount of nutrients within a certain boundary and for a certain time period (e.g., 1 year). In this study, a nutrients budget model was developed to effectively determine the surplus of nutrients within a region in Korea. The C# program language was used in order to facilitate the deployment of a graphical user interface (GUI) and to enhance compatibility. Also, the model was developed on Windows OS, which is the commonly used operating system in Korea. The model was based on the OECD/Eurostat nutrient budget method, and it was modified to consider manure composting procedures as well. There are key features of the nutrient budget model, including directly use of the original data sets from various input and output sources, and a collectively exchange of the address in different formats. The model can quickly show the results of various spatial and temporal resolutions with the same data, as well as perform a sensitivity analysis with coefficients and easily compareresults using tables and graphs. Further, it would be necessary to study the extension of the scope of utilization, such as the application of various nutrient budget methods. It would also be helpful to investigate both pre and postprocessing information such as linking input data through online systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.7
• /
• pp.821-826
• /
• 2011

CAE-based structural optimization techniques are applied for the design of a lightweight crane. The boom of the crane is designed by shape optimization with the shape of the cross section of the boom as the design variable. The design objective is mass minimization, and the static strength and dynamic stiffness of the system are set as the design constraints. Hyperworks, a commercial analysis and optimization software, is used for shape and topology optimization. In order to consistently change the shape of the elements of the boom with respect to the change in the shape of its cross section, the morphing function in Hyperworks is used. The support of the boom of the original model is simplified to model the design domain for topology optimization, which is discretized by using three-dimensional solid elements. The final result after shape and topology optimization is 19% and 17% reduction in the masses of the boom and support, respectively, without a deterioration in the system stiffness.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.5
• /
• pp.85-91
• /
• 2020

In order to calculate the Crop Water Stress Index (CWSI), it is necessary to collect weather data (air temperature, humidity, wind speed and solar radiation) and canopy temperature. However, it is not always available to have necessary data sets for CWSI calculation. Therefore, this study was aimed to develop an easy and simple CWSI equation (CWSI_EE) using only two data, air and canopy temperatures. Infrared sensors and weather sensors were installed on apple and peach trees and nearby a study area and every ten-minute data were collected from June to October in 2018 and 2019, respectively. A relationship between air-canopy temperature difference and CWSI was statistically analyzed and used to develop CWSI_EE using the three dimensional Gaussian model. The performance of CWSI_EE against original CWSI showed R² and NSE to 0.780 and 0.710 for apple trees and R² and NSE to 0.884 and 0.866 for peach trees. This study found that the level of crop water stress could be easily calculated using CWSI_EE with only air and canopy temperature data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.5
• /
• pp.424-432
• /
• 2011

Shape parameters and design variables for a centrifugal compressor impeller were investigated for optimizing a centrifugal compressor. In order to compare the performance of an optimized impeller with the performance of the original impeller, an already tested impeller was chosen and design variables for optimization were selected. The meridional shapes at the shroud and at the hub were re-designed using the Bezier curve. The camber-lines of the impeller blade at the hub and at the tip were also expressed by the Bezier curve. The shape curves for impeller could be expressed using 6-8 control points. Among them, eight control points which have strong effect to the shape can be selected as design variables for optimization. Therefore, any impeller which is expressed by data points for its shape can be optimized using few design variables.

• Textile Coloration and Finishing
• /
• v.6 no.3
• /
• pp.27-36
• /
• 1994

In order to produce a water repellent surface on polyester fabric, samples were treated in the atmosphere of $CF_4$ glow discharge plasma. The samples used in the study were ployester fabric and poyester film. The purpose of film treatment is for the comparison of hydrophobicity with fabric sample at same treatment condition. Radio frequency(13.56MHz) generator was used as electric source and its in put power is 100 Watt. Water repellency was evaluated by contact angle measurement. Result obtained are as follows. 1) Fiber interstice of original fabric was ana lysed as 0.43$\mu$m, and this value was sufficiently ideal for making water repellent fabric. 2) The most favorable setting position of substrate was the center area between two electrodes. 3) Fabric contact angle was higher than film contact angle at same treatment condition, and its difference was more than 50${\circ}$. And it was incapalbe of fabric contact angle measurement when the film contact angle was less than 90${\circ}$. because the fabric is susceptible to absorption of water by the capillary effect. 4) Fabric contact angle can not revealed the precise defferences of surface hydrophobicity, however, the film contact angle showed the real hydrophobic nature. 5) It was not sufficient method to evaluate the hydrophobicity of fabric surface by merely measure of the water contact angle. 6) It showed high water repellent nature at 0.06 torr of $CF_4$ plasma gas pressure and duration of 45 seconds treatment, and it can not be anticipated more improved nature if the pressure and duration of treatment time were increased.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.1
• /
• pp.1-12
• /
• 2013

Objectives : In order to make a proposal of a Korean standard dental hygiene curriculum, the job description of the National Health Personnel Licensing Examination Board was analyzed to prepare a job analysis matrix of dental hygienist to select required core competency. Methods : Data were analyzed to test the job validity of dental hygienist and categorize the duties of dental hygienist. A proposal of a standard dental hygiene curriculum was mapped out by making a comparative analysis of the courses necessary for American authorization of dental hygiene curriculum, existing proposals of Korean standard dental hygiene curriculum and the courses of the departments of dental hygiene offered by domestic three-year colleges and four-year universities. Results : Basic medicine courses were reinforced or newly offered to provide an opportunity for students to transfer to a domestic four-year university or to a foreign university. In the field of clinical dental hygiene and practice, preventive dentistry, prophylaxis and practice were integrated, and the names of the related courses were unified to give a chance for students to engage in comprehensive dental hygiene practice. There were different courses for dental clinical science at present. In this proposal, students should earn 125 credits in total. Conclusions : Standard dental hygiene curriculum proposal was required by three-year and four-year colleges across the nation. To make it happen, the original names of dental hygiene courses should be used, and the dental hygiene certification and evaluation institute that is under the umbrella of the Korean Dental Hygienists Association should lay out the standard of the KSDHEP to facilitate the utilization of the standard dental hygiene curriculum proposal.

• School Mathematics
• /
• v.10 no.3
• /
• pp.443-461
• /
• 2008

The purpose of this study was to provide teachers with suggestions on how to teach the unit of finding the area of plane figure by analyzing students' different solution methods. The solution methods were analyzed according to how the original area of the given figure was kept: partition, transformation, and elimination. The partition method was most used. With regard to transformation, students seemed to find it easy to use the area of rectangle. With regard to elimination, students were successful using elimination to find the area of a given figure but had difficulty in producing a formula from the method. The teacher played a key role to encourage students to employ different solution methods, and gave them opportunities to compare and contrast various methods. A cautionary note is that, with too much emphasis on 'variety', the mathematical efficiency may be lost in the process. It suggests that a teacher should be careful to establish appropriate sociomathe- matical norms with students in order that they can make their own judgment on which solution method is mathematically worth and efficient.