• Applied Biological Chemistry
• /
• 제27권
• /
• pp.68-79
• /
• 1984

An increased population and rapidly expanding industrial development have led to enormous amounts of various domestic and industrial wastes. The proper disposal of ever-increasing wastes is a growing global problem. Land treatment is one of the rational approaches that are environmentally safe and economically practical. It has long been practised in many sites. Recycling of industrial wastes on agricultural land can provide better possible means for maintaining environmental quality and utilizing waste-resources. Even though industrial wastes are beneficial as soil amendment and fertilizer, they have some limitation on land application because of wide variability as well as physicochemical problem in their composition. A direct application of solid and liquid wastes on land is being practised in Korea and some experimental results are presented. The direct application of fermentation waste on rice resulted in a 6 percent yield increase. Another organic residue from glutamic acid fermentation is widely used not only as a direct application as a liquid fertilizer but also for a raw material of organic compound fertilizer. These wastes are much promising as sources of plant nutrients, since they have large amounts of nutrients, especially nitrogen with few toxic metals. On the other hand, fertilizers developed from inorganic industrial wastes include calcium silicate, calcium sulfate and ammonium sulfate. The calcium silicate fertilizer simply produced from slag, by-product of iron and steel manufacturing plant is one of the most successful example of the conversion of wastes to fertilizer and slag production capacity totals to over three million MT/year. About 200,000 MT of calcium silicate fertilizer is currently applied in the paddy rice every year. Calcium sulfate, a waste from the wet phosphoric acid process is to some extent used as a filler of compound fertilizers but quite large quantites are directly applied for the reclamation of tidal flat.

• 구강회복응용과학지
• /
• 제39권4호
• /
• pp.222-228
• /
• 2023

교모는 치아 간의 접촉으로 인하여 치아 경조직이 소실되는 것으로, 심한 경우 상아질이 노출되어 선택적인 부식과 치아의 과도한 마모가 동반되는데, 이를 cupping이라고 부른다. 이러한 병소를 치료하지 않고 방치할 경우 병소의 크기가 점차 커지게 되어 지지되지 않는 법랑질이 파절되고, 결과적으로 심미성과 저작 기능이 저하된다. 본 증례보고에서는 심한 교모로 인해 cupping과 법랑질 파절이 동반된 환자에서 유기필러가 함유되어 부드러운 성질을 지닌 레진을 이용하여 직접수복을 실시하였다. 6년 후의 경과관찰에서 교합면의 충전은 대부분 탈락하였으나 협측의 충전은 비교적 온전하게 남아 있음을 관찰할 수 있었고, 이런 형태의 레진이 교합력이 크게 가해지는 부위보다는 교합력이 비교적 약하게 가해지는 부위에 적합한 재료임을 확인할 수 있었다.

• Advances in materials Research
• /
• 제2권1호
• /
• pp.37-49
• /
• 2013

The transition metal salt doped solid polymer electrolyte [TSPE] were prepared with HPMC as a host polymer. The virgin and doped films were prepared by solution-casting method and investigated using wide angle X-ray scattering method. Micro structural parameters like lattice strain (g%), stacking/twin faults, the average number of unit cells counted in a direction perpendicular to the Bragg's plane (hkl) spacing of (hkl) planes dhkl, crystallite size Ds, distortion width, standard deviation were determined by whole pattern powder fitting (WPPF) method, which is an extension of single order method. It is found that the crystallite size decreases with the increase in the content of $FeCl_3$. This decrease is due to increase in localized breaking of polymer network which also accounts for the amorphous nature of the material. The filler inorganic salt $FeCl_3$ acts as plasticizer. FTIR study also confirms and justifies the interaction between the polymer and in-organic salt in the matrix. Physical properties like mechanical stability and Ac conductivity in these films are in conformity with the X-ray results.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.73-80
• /
• 2007

Nanocomposites are used as a new class of polymer system and many researchers have been interested in the clay nanocomposite because of its good mechanical properties, heat resistance, flame retardancy, and barrier property. Modified layered silicates as fillers are dispersed at a nanometer-level within a polymer matrix and then new extraordinary properties are observed. In this study, polypropylene/clay nanocomposites were prepared in a twin screw extruder by the melt compounding method. In order to increase the compatibility of PP with the clay, the MAPP was used as a compatibilizer. And organic modified clays were used as a nanometric filler during the melt extrusion. Through the analysis of SAXS, WAXS, the dispersion of clay was investigated. These nanocomposites compared with a neat polypropylene/talc composite have high modulus, low toughness, and reduced shrinkage at the stable dispersion.

• Elastomers and Composites
• /
• 제29권1호
• /
• pp.18-29
• /
• 1994

The purpose of this study is to investigate reinforced effect between silica treated by coupling agents and rubber matrix under the configuration chemical bonds, and the effect of silica particles coated by organic polymers using aluminum chloride as the catalyst. In vulcanization characteristies were tested by Curastometer. The M-series vulcanizates were reached to the fastest optimum cure $time(t_{90})$ and R-series vulcanizates with the same formula had the shorted optimum cure times. Tensile characteristics measuring with a tensile tester revealed that the M-series vulcanizate was the best in the physical properties, such as tensile strength. In 100% modulus, however, the S-series vulcanizates appeared to be better than the other vulcanizates. Also, hardness showed the following order : S-series>R-series>M-series with the order of elongation R-series>M-series>S-series. In SEM test, shapes of chemical treated silicas were observed. The dispersion of filler in the SBR composite appeard uniformly. In RDS test for the dynamic characteristics, G' indicates that S-3 shows the highest value with the next order M-3>R-3, and the order of damping values are as followe: M-3>M-3>R-3.

• Membrane and Water Treatment
• /
• 제6권4호
• /
• pp.309-321
• /
• 2015

We report in this study the synthesis of mixed matrix reverse osmosis membranes by interfacial polymerization (IP) of thin film nanocomposite (TFNC) on porous polysulfone supports (PS). This paper investigates the synthesis of ZnO nanoparticles (NPs) using the sol-gel processing technique and evaluates the performance of mixed matrix membranes reached by these aerogel NPs. Aqueous m-phenyl diamine (MPD) and organic trimesoyl chloride (TMC)-NPs mixture solutions were used in the IP process. The reaction of MPD and TMC at the interface of PS substrates resulted in the formation of the thin film composite (TFC). NPs of ZnO with a size of about 25 nm were used for the fabrication of the TFNC membranes. These membranes were characterized and evaluated in comparison with neat TFC ones. Their performances were evaluated based on the water permeability and salt rejection. Experimental results indicated that the NPs improved membrane performance under optimal concentration of NPs. By changing the content of the filler, better hydrophilicity was obtained; the contact angle was decreased from $74^{\circ}$ to $32^{\circ}$. Also, the permeate water flux was increased from 26 to 49 L/m2.h when the content of NPs is 0.1 (wt.%) with the maintaining of lower salt passage of 1%.

• Geomechanics and Engineering
• /
• 제29권1호
• /
• pp.13-23
• /
• 2022

Peat soil has the characteristics of high moisture content, large void ratio and low shear strength. In this study, unconfined compressive strength and SEM tests are conducted to investigate the effects of ultrahigh moisture content, cement content, organic content and pH value on the strength of solidified peat. As an increase in the cement content and curing period, the failure mode of solidified peat soil changes from ductile failure to brittle failure. The influence of moisture content on the strength of solidified peat is greater than the cement content. As cement content increases from 10% to 30%, strength of solidified peat at a curing age of 28 days increases by 161%~485%. By increasing water content by 100%, decreases of solidified peat at a curing age of 28 days is 42%~79%. Compared with the strength of solidified peat with a pH value of 5.5, the strength of peat with a pH value of 3.5 reduces by 10% ~ 46%, while the strength of peat with a pH value of 7.0 increases by 8% ~ 38%. It is recommended to use filler materials for stabilizing peat soil with moisture content greater than 200%. Because of small size of clay particles, clay added in the cement solidified peat can improve much higher strength that that of sand.

• 멤브레인
• /
• 제25권5호
• /
• pp.373-384
• /
• 2015

지난 수십 년 동안, 고분자막은 기체 분리 분야에서 큰 역할을 해왔다. 온실가스의 주범인 이산화탄소를 분리하기 위해서는 더 높은 투과선택도와 장수명 및 대면적 등을 요구한다. 하지만 기존 고분자 분리막들은 투과도와 선택도의 역상관 관계 특징을 지니고 있으며, 무기물질은 투과성능이 우수하지만 가격이 비싸다는 단점이 있다. 최근 많은 연구가 진행되어온 혼합 매질 분리막은 고분자와 무기물질의 이점들을 혼합하여 기체 분리막의 차세대로서 큰 이목을 이끌고 있다. 혼합 매질 분리막은 대칭적인 구조 또는 비대칭적인 구조를 가지고 있으며, 투과량을 증가시키기 위해서는 비대칭적인 구조가 바람직하다. 혼합 매질 분리막에서 가장 중요한 변수로는 무기입자의 균일한 분산과 무기물과 고분자 사이의 좋은 계면을 형성하는 것이다. 최근에 새로운 분류의 다공성 결정성 물질인 금속 유기 구조체(MOF)는 이산화탄소 분리용 소재로써 많은 관심을 끌고 있다. MOF의 한 종류 중, zeolitic imidazolate frameworks (ZIF)는 가장 흔하게 사용되는 무기입자이며 이는 입자의 크기를 작게 만들 수 있으며, $CO_2$를 분리하기에 적절한 기공의 크기를 가지고 있기 때문이다. 이 밖에 혼합 매질 분리막에 사용되는 특정 물질들을 적용하기 위해서는 선택도와 크기, 호환성, 안정성 등을 동시에 최적화시켜야 한다. 이와 같이 본 총설에서는, 혼합 매질 분리막에 관련된 주요 연구내용과 이러한 연구를 수행하는 대표적인 전략들을 소개하였다.

• 보존과학회지
• /
• 제36권6호
• /
• pp.475-482
• /
• 2020

송진을 기반으로한 2액형의 주제를 합성하고 이를 이용하여 접착제와 메움제를 제조하였다. 접착제 주제는 Maleic anhydride modified rosin에 epichlorohydrin을 반응시켜 epoxide group 이 형성되도록 제조하고 경화제는 상온 경화형 triethylenetetramine을 사용하였다. 제조된 접착제는 주제와 경화제의 비는 100 : 20이었으며, 메움제는 Filler를 혼합하여 주제와 경화제 모두를 점토형으로 제조하였다. 제조된 원액 접착제와 메움제는 우수한 접착 강도(3.06 MPa)와 자외선 조사에서 매우 안정한 결과(△E^* ab 3.55, △b^* 3.17)를 나타내어 기존 시판 복원용 접착제들에 비하여 우수한 결과를 나타내었다. 또 경화 완료 후에 acetone과 toluene 등의 유기 용매에 용해되어 가역성을 갖는 재료로 볼 수 있어 복원으로 인하여 발생될 수 있는 문제점의 일부를 해결한 결과를 나타내었다. 제조된 접착제 및 메움제를 이용해 실제 목공예품에 적용하여 작업성, 안정성, 제거성 등에서 우수한 결과를 나타내었으며 이를 이용할 경우 다양한 분야의 적용 가능성을 확인할 수 있었다.

• 한국분말재료학회지
• /
• 제16권6호
• /
• pp.431-437
• /
• 2009

Various inorganic fillers improve the thermal conductivity and physical properties of organic products. Alumina has been used a representative filler in the heat radiation sheet for the heat radiation of electric device. The high filling rate of alumina increases the thermal conductivity and properties of products. We successfully developed the spherical alumina by flame fusion process using the oxygen burner with LPG fuel. In the high temperature flame (2500$\sim$3000$^{\circ}C$) of oxygen burner, sprayed powders were melting and then rotated by carrier gas. This surface melting and rotation process made spherical alumina. Especially effects of chemical composition and particle size of stating materials on the melting behavior of starting materials in the flame and spheroidization ratio were investigated. As a result, spheroidization ratio of boehmite and aluminum hydroxide with endothermic reaction of dehydration process was lower than that of the sintered alumina without dehydration reaction.