• Structural Engineering and Mechanics
• /
• 제40권5호
• /
• pp.595-616
• /
• 2011

Impact experiments have been carried out on concrete slabs. The first group was traditionally manufactured, densely reinforced concrete targets, and the next were ordinary Portland and calcium aluminate cement based HPSFRC (High performance steel fiber reinforced concrete) and SIFCON (Slurry infiltrated concrete) targets. All specimens were hit by anti-armor tungsten projectiles at a muzzle velocity of over 4 Mach causing destructive perforation. In Part I of this article, production and experimental procedures are described. The first group of specimens were ordinary CEM I 42.5 R cement based targets including only dense reinforcement. In the second and third groups, specimens were produced using CEM I 42.5 R cement and Calcium Aluminate Cement (CAC40) with ordinary reinforcement and steel fibers 2 percent in volume. In the fourth group, SIFCON specimens including 12 percent of steel fibers without reinforcement were tested. A high-speed camera was used to capture impact and residual velocities of the projectile. Sample tests were performed to obtain mechanical properties of the materials. In the companion Part II of this study, numerical investigations and simulations performed will be presented. Few studies exist that examine high-velocity impact effects on CAC40 based HPSFRC targets, so this investigation gives an insight for comparison of their behavior with Portland cement based and SIFCON specimens.

• 한국건축시공학회지
• /
• 제22권1호
• /
• pp.35-43
• /
• 2022

High Sulfated Calcium Silicate cement(HSCSC) 콘크리트의 성능을 보통포틀랜드시멘트(OPC), 고로슬래그시멘트(S/C)와 비교 검토하고자 하였다. 콘크리트 압축강도 실험결과 초기 3일 재령에서의 High Sulfated Calcium Silicate cement 콘크리트 압축강도 발현율이 보통포틀랜드시멘트 콘크리트의 73.6% 수준으로 다소 적게 확인되었으나, 28일 재령에서 High Sulfated Calcium Silicate cement의 강도 발현율이 상승하여 보통포틀랜드시멘트 대비 약 107.0% 수준으로 소폭 상승하는 것을 확인할 수 있었다. 또한, 콘크리트의 염소이온침투저항성 실험결과 재령 28일의 경우 보통포틀랜드시멘트 대비 고로슬래그시멘트, High Sulfated Calcium Silicate cement 순서로 각각 73.4%, 93.0% 감소하였으며, 재령 56일의 경우 79.1%, 98.3% 감소하여, 우수한 염소이온 침투 저항성능을 확인하였다. 특이사항으로는 보통포틀랜드시멘트, 고로슬래그시멘트 보다 High Sulfated Calcium Silicate cement의 재령 경과에 따른 통과 전하량 감소율이 더 높은 것을 확인할 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.33-39
• /
• 1999

This study was conducted to confirm the effect of bypass dust on the hydration and mechanical properties of the cement pastes and mortar obtained from ordinary Portland cement (OPC), OPC-slag and OPC-fly ash system. The rate of heat evolution is accelerated with the content of By-pass Dust(BD). total heat evolution increased because alkali-chlorides activated the hydration of blended cement. Compressive strength and bound water content show maximum value at 5wt% By-pass Dust(BD) on each curing time in ordinary Portland cement and slag blended cement. Ca(OH)2 content of Ordinary Portland Cement increased as the content of BD and curing time. In blended cement, the formation of Ca(OH)2 is active at early hydration stage. By pozzolanic reaction, the content of Ca(OH)2 is decreased as curing time goes by. According to the BD content stable chlorides complex of Friedel's salt (C3A·CaCl2·10H2O) is created. Due to the hydration activation effect of chlorides and alkali we observed Type II C-S-H, which developed into densest microstructure.

• 한국세라믹학회지
• /
• 제44권9호
• /
• pp.477-482
• /
• 2007

The effect of the mixing ratio of compounds in a slag-OPC-Gypsum system on the physical properties of Slag cement is investigated in this study. $Na_2SO_4$ was used as an alkali activator. Blast furnace slag cement was prepared from a mixture of blast furnace slag, ordinary Portland cement and anhydride gypsum. The fluidity and the compressive strength according to the ratio of each mixture were analyzed in statistical analyses in order to discover the parameters influencing the fluidity and compressive strength. The results showed that the hydration of blast furnace slag took place with the addition of $Na_2SO_4$ and that column-crystalline ettringite was created as the main hydration product of the blast furnace slag. In addition, it was found that the compressive strength of blast furnace slag cement tends to increase when the ordinary Portland cement content is higher up to three days. However, it is known that the compressive strength tends to increase as the blast furnace slag content becomes higher with increases in the level of OPC after 28 days. As a result of this analysis, it is believed that the ordinary Portland cement content influences the initial compressive strength of blast furnace slag cement, and that in later days this is highly influenced by the slag content.

• 콘크리트학회논문집
• /
• 제16권4호
• /
• pp.557-564
• /
• 2004

This paper introduces a study carried out to investigate sodium sulfate attack caused by various reactive products. Experiments were performed on mortar and paste specimens made with ordinary Portland cement (OPC) conforming to KS L 5201 Type I. The water-cement ratios were varied from 0.35 to 0.55. It was found from the laboratory study that the water-cement ratio may be a key to control the deterioration of OPC matrix during sodium sulfate attack. Furthermore, X-ray diffraction (XRD) confirmed that ettringite, gypsum and thaumasite were the main products formed by sodium sulfate attack. These findings were well supported by thermal analysis through differential scanning calorimetry (DSC), and confirmed the long-term understanding that deterioration mechanism by sodium sulfate attack is a complicated process. Most importantly, deterioration due to sodium sulfate attack is characterized as the drastic reduction in compressive strength as well as the expansion (especially in cement matrix with a higher water-cement ratio).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.449-456
• /
• 2000

Remediation grouting has been widely used for the rehabilitation of various civil works like hydraulic and traffic structures. Recently there were some cases of remediation grouting for repairing old dams in korea. So this study will describe the case of remediation grouting of the concrete dam base located east-northern part of Seoul. We use Lugeon Test and Borehole Image Processing System(BIPS) for estimating the effectiveness of remediation grouting of this project. As the results of this study, we could find the lots of joints between the old concrete body and the weathered rock base. So the about 30% quantity of total cement grouts was injected at the boundary surface between concrete and rock base. And Lugeon Test and BIPS could be compared relatively because BIPS results could be presented quantitatively as well as qualitative analysis. Finally, we could find microfine cement was very effectively injected to the fine fissured concrete body compared with ordinary portland cement, but there was little injectability differences beteween microfine cement and ordinary portland cement at the large cracks or cavities were developed rock base.

• 한국세라믹학회지
• /
• 제33권3호
• /
• pp.307-312
• /
• 1996

In following addition of 0.3, -0.6, 0.8, 1.0 and 5 weight percent MgSiF66H2O studies have been made of the setting and hardening characteristics of ordinary portland cement. MgSiF66H2O retarded the setting time of ordinary portland cement and extended the induction pariod of the hydration. In ordinary portland cement the setting characteristics were drastically altered especially at high MgSiF66H2O contents. Evidence was also obtained by the formation of a KSiF6 which was very fine particle. The results wee as follows. 1. Slump was slightly decreased when MgSiF66H2O added. 2. Setting time was retarded depending on the amount of retarding agent 2 to 8 hours 3. Compressive strength was almost same or some increased in comparision with opc. 4. When MgSiF66H2O was added to cement paste K2SiF6 were formed It was fine-sized distributed uniformly in cement grain and caused retardation of cement setting.

• 한국구조물진단유지관리공학회 논문집
• /
• 제4권1호
• /
• pp.131-138
• /
• 2000

In this study, physical and engineering properties of ordinary portland cement and microcement were investigated to verify reinforcing effect of underpinning of open caisson foundation by using microcement grouting. Laboratory injection tests such as infiltration and injection in case of seepage for the stream bed soil at ${\bigcirc}{\bigcirc}$ Great Bridge in Seoul were carried out. Field injection tests to reinforce open caisson foundation at ${\bigcirc}{\bigcirc}$ Great Bridge were performed and the ability of application by microcement grouting was evaluated. From the test results, physical and engineering properties of microcement are better than those of ordinary portland cement. Also, the ability of infiltration and solidity in case of seepage is better than that of ordinary portland cement. Therefore, it is concluded that microcement is an excellent material to reinforce open caisson foundation of the existing bridge structure under the water and can be used as underpinning material of general foundations.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권5호
• /
• pp.117-124
• /
• 2017

${\alpha}$형 반수석고는 생산방법이 복잡하고, 대량 연속 생산이 곤란하며, 재료 단가가 높기 때문에 건설재료로써 활용범위가 크지 않았으나, 최근 화력발전소의 배연탈황석고를 활용하여 경제적으로 ${\alpha}$형 반수석고를 제조하는 기술이 실용화되고 있다. 이에 본 연구에서는 응결 시작 시간이 빠르고 재령 초기 팽창변형이 발생하는 ${\alpha}$형 반수석고의 특징에 주목하여, ${\alpha}$형 반수석고를 10, 20, 30 wt.% 치환한 보통포틀랜드시멘트 및 고로슬래그시멘트 모르타르를 제조한 후 응결 및 압축강도 특성, 건조수축을 검토하였다. 실험 결과, ${\alpha}$형 반수석고의 치환율이 증가할수록 보통포틀랜드시멘트 모르타르 및 고로슬래그시멘트 모르타르의 초결시간이 빨라지는 경향을 확인할 수 있었다. 또한, 보통포틀랜드시멘트 모르타르와 고로슬래그시멘트 모르타르 모두 ${\alpha}$형 반수석고의 치환율이 증가할수록 압축강도가 저하되는 경향을 보였으며, 보통포틀랜드 시멘트보다 고로슬래그시멘트에서 ${\alpha}$형 반수석고의 압축강도 발현이 유리한 것으로 나타났다. 한편, ${\alpha}$형 반수석고를 치환한 모르타르의 경우 ${\alpha}$형 반수석고의 혼입에 의해 생성된 에트링가이트 침상결정의 성장압에 의해 초기재령에서 수축변형이 저감되는 것을 확인할 수 있었으며, 초기 재령에서 수축변형의 억제 효과는 분명하지만, 재령이 지남에 따라 ${\alpha}$형 반수석고를 치환하지 않은 조건과 변형의 차이는 다시 감소하는 경향을 보였다. 따라서 ${\alpha}$형 반수석고를 모르타르에 적용할 경우 강도는 다소 저하하지만, 응결 촉진 및 수축변형 억제에 큰 효과가 있기 때문에 건설재료로써 활용 가치가 높을 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.704-709
• /
• 2000

This study is to test effects of sulfate attack on deterioration of cement mortar. Four tests have been carried out with four types of mortars mixed by ordinary portland cement and sulfate-resistant portland cement containing blast-furnace slag and fly-ash. It was immersed in sulfate solution for 7, 28, 91, and 180 days. from the test results, sulfate attack resistance of cement mortar was improved by admixtures (blast-furnace slag and fly-ash), sulfate-resistance portland cement mortar showed high resistance than ordinarily portland cement at compressive strength, and similar the resistance of sulfate attack with ordinarily portland cement mortar with admixtures.