DOI QR코드

DOI QR Code

High-velocity impact of large caliber tungsten projectiles on ordinary Portland and calcium aluminate cement based HPSFRC and SIFCON slabs -Part I: experimental investigations

  • Korucu, H. (Turkish Naval Forces Command) ;
  • Gulkan, P. (Department of Civil Engineering, Cankaya University)
  • 투고 : 2011.03.03
  • 심사 : 2011.08.18
  • 발행 : 2011.12.10

초록

Impact experiments have been carried out on concrete slabs. The first group was traditionally manufactured, densely reinforced concrete targets, and the next were ordinary Portland and calcium aluminate cement based HPSFRC (High performance steel fiber reinforced concrete) and SIFCON (Slurry infiltrated concrete) targets. All specimens were hit by anti-armor tungsten projectiles at a muzzle velocity of over 4 Mach causing destructive perforation. In Part I of this article, production and experimental procedures are described. The first group of specimens were ordinary CEM I 42.5 R cement based targets including only dense reinforcement. In the second and third groups, specimens were produced using CEM I 42.5 R cement and Calcium Aluminate Cement (CAC40) with ordinary reinforcement and steel fibers 2 percent in volume. In the fourth group, SIFCON specimens including 12 percent of steel fibers without reinforcement were tested. A high-speed camera was used to capture impact and residual velocities of the projectile. Sample tests were performed to obtain mechanical properties of the materials. In the companion Part II of this study, numerical investigations and simulations performed will be presented. Few studies exist that examine high-velocity impact effects on CAC40 based HPSFRC targets, so this investigation gives an insight for comparison of their behavior with Portland cement based and SIFCON specimens.

키워드

참고문헌

  1. ABAQUS Users' Manual (2007), Version 6.7, Simulia, Dassault Systemes, Providence, Rhode Island.
  2. Bekaert (2008), Product Data Sheets of RC-80/60-BN and RL-45/30-BN, www.bekaert.com.
  3. Beppu, M., Miwa, K., Itoh, M., Katayama, M. and Ohno, T. (2008), "Damage evaluation of concrete plates by high-velocity impact", Int. J. Impact Eng., 35(12), 1419-1426. https://doi.org/10.1016/j.ijimpeng.2008.07.021
  4. CEN/TC 51 N 645 (2000), Calcium Aluminate Cement. Report of CEN/TC 51 WG 6 TG1, Krakow, Poland.
  5. CEN/TC 51 N 802 (2004), prEN 14647 Calcium Aluminate Cement: Composition, Specifications and Conformity Criteria, Lisbon, Portugal.
  6. ConWep User's Guide (1993), Applications of TM 5-855-1, Fundamentals of Protective Design for Conventional Weapons, Department of the Army, Waterway Experiment Station, Corps of Engineers, Vicksburg, Mississippi.
  7. Dancygier, A.N. (2009), "Characteristics of high performance reinforced concrete barriers that resist nondeforming projectile impact", Struct. Eng. Mech., 32(5), 685-699. https://doi.org/10.12989/sem.2009.32.5.685
  8. Luo X., Sun W., and Chan S.Y.N. (2000), "Characteristics of high-performance steel fiber-reinforced concrete subject to high velocity impact", Cement Concrete Res., 30(6), 907-914. https://doi.org/10.1016/S0008-8846(00)00255-6
  9. MKEK (2010), Turkish Mechanical and Chemical Industry Corporation, http://www.mkek.gov.tr/ foUrunDetaylari.aspx?iKodUrun=273&iKodUrunKategorisi=120, March.
  10. Neville, A. (1975), High Alumina Cement Concrete, John Wiley & Sons, New York.
  11. Orphal, D.L., Franzen, R.R., Charters, A.C., Menna, T.L. and Piekutowski, A.J. (1997), "Penetration of confined boron carbide targets by tungsten long rods at impact velocities from 1.5 to 5.0 km/s", Int. J. Impact Eng., 19(1), 15-29. https://doi.org/10.1016/S0734-743X(96)00004-8
  12. Ozsahin, E. and Tolun, S. (2010), "Influence of surface coating on ballistic performance of aluminum plates subjected to high velocity impact loads", Mater. Design, 31(3), 1276-1283. https://doi.org/10.1016/j.matdes.2009.09.018
  13. PS3D Theory Manual and Verification Examples (2005), Numerics GmbH, Petershausen, Germany.
  14. Puente, J.L., Varas, D., Loya, J.A. and Zaera, R. (2009), "Analytical modeling of high velocity impacts of cylindrical projectiles on carbon/epoxy laminates", Compos. Part A-Appls., 40(8), 1223-1230. https://doi.org/10.1016/j.compositesa.2009.05.008
  15. Quek, S.T., Lin, V.W.J. and Maalej, M. (2010), "Development of functionally-graded cementitious panel against high-velocity small projectile impact", Int. J. Impact Eng., 37(8), 928-941. https://doi.org/10.1016/j.ijimpeng.2010.02.002
  16. Teng, T.L., Chu, Y.A., Chang, F.A., Shen, B.C. and Cheng, A.S. (2008), "Development and validation of numerical model of steel fiber reinforced concrete for high-velocity impact", Comp. Mater. Sci., 42(1), 90-99. https://doi.org/10.1016/j.commatsci.2007.06.013
  17. TM 5-855-1 (1998), Technical Manual-Design and Analysis of Hardened Structures to Conventional Weapons Effects, The Departments of Army, Air Force and Navy and the Defense Special Special Weapons Agency, Washington, D.C.
  18. TS 708 (1996), Steel Bars for Concrete, Turkish Standards Institution, Ankara, Turkey.
  19. Turkish Seismic Design Code (2007), Deprem Bolgelerinde Yapilacak Binalar Hakkinda Yonetmelik, Bayindirlk ve Iskan Bakanligi , Ankara.
  20. Vossoughi, F., Ostertag, P.O., Monterio, P.J.M. and Johnson, G.C. (2007), "Resistance of concrete protected by fabric to projectile impact", Cement Concrete Res., 37(1), 96-106. https://doi.org/10.1016/j.cemconres.2006.09.003
  21. Zhang, M.H., Shim, V.P.W., Lu, G. and Chew, C.W. (2005), "Resistance of high-strength concrete to projectile impact", Int. J. Impact Eng., 31(7), 825-841. https://doi.org/10.1016/j.ijimpeng.2004.04.009
  22. Zhang, Q., Wang, X., Huang, F., Chen, L. and Guo, X. (2009), "An experimental and numerical study of the dynamic response of a free-free aluminum beam under high velocity transverse impact", Int. J. Impact Eng., 36(12), 1385-1393. https://doi.org/10.1016/j.ijimpeng.2009.02.011
  23. Zukas, J.A., Nicholas, T., Swift, H.F., Greszczuk, L.B. and Curran, D.R. (1992), Impact Dynamics, Krieger Publishing Company, Malabar, FL.

피인용 문헌

  1. High-velocity impact of large caliber tungsten projectiles on ordinary Portland and calcium aluminate cement based HPSFRC and SIFCON slabs -Part II: numerical simulation and validation vol.40, pp.5, 2011, https://doi.org/10.12989/sem.2011.40.5.617
  2. Polypropylene fiber reinforced concrete plates under fluid impact. Part I: experiments vol.60, pp.2, 2016, https://doi.org/10.12989/sem.2016.60.2.211
  3. Hybrid-fibre-reinforced concrete containing multi-wall carbon nanotubes vol.173, pp.9, 2011, https://doi.org/10.1680/jstbu.18.00180
  4. Damage potential: A dimensionless parameter to characterize soft aircraft impact into robust targets vol.78, pp.1, 2021, https://doi.org/10.12989/sem.2021.78.1.031