• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.19
• /
• pp.39-46
• /
• 1975

The optimum plot size and shape for soybean yield trials were estimated by using two different soybean varieties, Kumkang-daelip and Clark. Long narrow shape plot was generaIly showed lower C.V. value as compared to the plots consisted of more row number with short row length. The results obtained in this experiment provided the optimum size and shape of plots for Clark as 1. 4m x 6m, and for Kumkang-dailip as 1.4m $\times$ 9m, respectively.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.315-319
• /
• 1997

In this study, the optimum analytical conditions for determination of distribution of propylene oxide in a nonionic surfactant and separation of fatty alcohols were investigated by Reversed Phase High Performance Liquid Chromatography. To analyse the distribution of propylene oxide (PO) and carbon chain length of a fatty alcohol, we derivatized samples for the purpose of using a UV detector. Also, we studied the influences of columns and mobile phase composition to obtain the optimum separation conditions. In our experiment, Waters Symmetry $C_8(3.9{\times}150mm)$ column was used. And the optimum condition were obtained by gradient elution with methanol and water as the mobile phase. In the plot of log k' vs composition of water in the binary phase, the linerality was very good. We ploted the calibration curve to conform the quality of fatty alcohol, a good linerality was obtained.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.72-82
• /
• 2005

The objective of this paper is to describe the optimization of design parameters in a large-sized commercial bus heater system by using CFD(computational fluid dynamics) analysis and Taguchi method. In order to obtain the best combination of each control factor which results in a desired performance of heater system, the parameter design of the Taguchi method is adopted for the robust design considering the dynamic characteristic. The research activity may be divided into four phases. The first one is analyzing the problem, i.e., ascertaining the influential factors. In the second phase the levels were set in such a way that their variation would significantly influence the response. In the third phase the experimental runs were designed. In the final phase the planned runs were carried out numerically to evaluate the optimal combination of factors which is able to provide the best response. In this study, eight factors were considered for the analysis: one with two level and seven with three level combinations comprising the $L_{18}(2^1{\times}3^7)$ orthogonal array. The results of this study can be summarized as follows ; (i)The optimum condition of control factor is a set of <$A_2\;B_1\;C_3\;D_3\;E_1\;F_2\;G_3\;H_2$> where A is shape of the outer fin, B is pitch of the outer fin, C is height of the outer fin, D is the inner fin number, E is the inner fin height, F is length of the flame guide, G is diameter of the heating element and H is clearance between air guide and heating element. (ii)The heat capacity of heated discharge air under the optimum condition satisfies the equation y=0.6M w here M is a signal factor. (iii)The warm-up rate improves about three times, more largely as com pared with the current condition, which results in about 9.2minutes reduction.

• Geotechnical Engineering
• /
• v.13 no.4
• /
• pp.55-66
• /
• 1997

In order to investigate the influence of installation angle of reticulated root piles(RRP) on their lateral load capacities, model tests of lateral loads on RRP with various installation angles $0^{\circ}\;, 5^{\circ}\;, 10^{\circ}\;, 15^{\circ}\;, 20^{\circ}\;,and 25^{\circ}$ are carried out. One set of RRP consists of 12 piles which are installed in circular patterns forming two concentric circles, each of which has 6 piles. Each pile made of a steel bar of 5mm in diameter and 350mm in length, is coated with sand until the bar has the diameter of 6.5mm. According to the test results, RRP's response is travily influenced by the displacement level. At low displacement level(1m), lateral load capacity increases as the installation angle is increased. However, the value of the optimum installation angle decreases as the displacement level is increased. In fact, it is found to be $17.5^{\circ}$ at 6mm lateral displacement. The ratios of the lateral resistances for the optimum installation angles to those for the vertical RRP decrease as the lateral displacements are increased. Thus the effect of slant ins angle of RRP is expected to be reduced at higher level of lateral displacement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.661-669
• /
• 1999

A probe card is one of the most important pan of test systems as testing IC(integrated circuit) chips. This work was related to bump-type silicon vertical probe card which enabled simultaneous tests for multiple semiconductor chips. The probe consists of silicon cantilever with bump tip. In order to obtain optimum size of the cantilever, the dimensions were determined by FEM(finite element method) analysis. The probe was fabricated by RIE(reactive ion etching), isotropic etching, and bulk-micromachining using SDB(silicon direct bonding) wafer. The optimum height of the bump of the probe detemimed by FEM simulation was 30um. The optimum thickness, width, and length of the cantilever were 20 $\mum$, 100 $\mum$,and 400 $\mum$,respectively. Contact resistance of the fabricated probe card measured at contact resistance testing was less than $2\Omega$. It was also confirmed that its life time was more than 20,000 contacts because there was no change of contact resistance after 20,000 contacts.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.1 s.23
• /
• pp.71-78
• /
• 2007

Stainless steel is very famous for using of industrials structure and joint elements. Stainless steel wire drawing is one of the most ancient crafts. But there's not any standard size of tapered die during tile drawing. This paper was studied die angle and dimension of whole die by using AFDEX drawing simulator. Stress, metal flow and strain rate was analyzed by AFDEX tools during the wire drawing. So optimum data of during dies was taken from them. Simulation data was correspond with experimental data. The results of the optimum dies are shown that (1) Reduction angle is $13.8^{\circ}$ (2) Bark relief angle is $20^{\circ}$ (3) Bearing length is 0.7975mm (4) Bearing dia is 0.2393mm The research of the optimum result when the make dies is connected an enterprise. After researching, I hope that indirection effect creation make development situation of the manufactural technical, practical application of the other die size by the detail data, utility factor and economical efficiency.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.1
• /
• pp.41-44
• /
• 2006

This study was conducted to investigate the optimum transplanting time of Ostericum koreanum Kit. cultivating under root apex propagation. Transplanting time per 10 days were from March 20th to May 1st. The results are follows : Soil chemical properties before experiment were well adapted upland including moderate fertility. Average temperatures during cropping seasons except March late were lower than normal years, but rainfall was abundant than that of normal years. The ratios of emergence and bolting were higher in the faster transplanting time. And also plant height, stem length and number of stem were well. Yield components of transplanted April 1st were well, and yield was 251 kg/10a. The yield was increased by 13% than that of March 20th. So optimum transplanting time is considered about April 1st.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.8
• /
• pp.2900-2922
• /
• 2021

In this paper, the power spectral density(PSD) for Multilevel Minimum Shift Keyed signal with modulation index h = 1/2 (M-ary MSK) are derived using the mathematical method of the Markov Chain model. At first, according to an essential requirement of the phase continuity characteristics of MSK signals, a complete model of the whole process of signal generation is built. Then, the derivations for autocorrelation functions are carried out precisely. After that, we verified the correctness and accuracy of the theoretical derivation by comparing the derived results with numerical simulations using MATLAB. We also divided the spectrum into four components according to the derivation. By analyzing these figures in the graphic, each component determines the characteristics of the spectrum. It is vital for enhanced spectral characteristics. To more visually represent the energy concentration of the main flap and the roll-down speed of the side flap, the specific out-of-band power of M-ary MSK is given. OMLCD(Optimum Maximum Likelihood Coherent Detection) of M-ary MSK is adopted to compare the signal received with prepared in advance in a code element T to go for the best. And M-ary MSK BER(Bit Error Rate) is compared with the same ary PSK (Phase Shift Keying) with M=2,4,6,8. The results show the detection method could improve performance by increasing the length of L(memory inherent) in the phase continuity.

• Korean Journal of Soil Science and Fertilizer
• /
• v.26 no.2
• /
• pp.85-92
• /
• 1993

This study was investigated on the morphological characteristics of rice grain as affected by three fertilizer application treatments. Of no-nitrogen, optimum nitrogen, and heavy nitrogen without potassium in three regions of Suweon (Mid-West Plain Zone), Ichon(Mid-Inland Plain Zone), and Kyehwado(South-charyung Mts. Plain Zone) with four varieties, i.e., three Tonsil types(Geumgangbyeo, Milyang 23, and Chilseongbyeo) and one japonica type(Chucheongbyeo, Akibare in Japanese name). The results obtained were as follows: The increase of nitrogen application caused an increase of grain length in rough rice and grain width in milled rice, resulting in a decrease of the width/thickness ratio in milled rice. The width and thickness of rice grain produced in Kyehwado were smaller than those in the other regions. Therefore, the ratio of length/width and length/thickness in rice grain produced in Kyehwado was larger. The one thousand grain weight of rice was heavier at the optimum nitrogen level than at the no-nitrogen and heavy nitrogen without potassium treatment levels. The weight percentage of hull in rough rice grain decreased in accordance with the increase of nitrogen application, while the weight percentage of bran in brown rice was constant. This suggested that for the normal development of rice grain a constant ratio of bran is needed. The morphological change of rice grain by fertilizer treatments and the change of region cultivated could not be distinguished from the native characteristics of the variety. Other grain characteristics were discussed in view of treatment and regional effects.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.1
• /
• pp.106-111
• /
• 2007

The current study was conducted to determine the optimum length of feed withdrawal for pre-harvest broilers. A total of three hundred broilers were sampled from an industrial population, and 30 chicks for each weight group (e.g., 1.5 and 2.5 kg) were randomly assigned to feed withdrawal treatments for 0, 3, 6, 9 and 12 h. Weight loss, yield, muscle pH, objective meat color and weights of gastro intestinal contents, crop, gizzard, provenriculus, small intestine, caecum, and rectum were determined. Live weight loss was significantly (p<0.05) increased as length of feed withdrawal extended. A significant (p<0.05) carcass yield for both 1.5 and 2.5 kg groups coincided after 9 and 6 h feed withdrawal, respectively. Net weights of intestinal contents for crop and gizzard were significantly (p<0.05) reduced by 6 h, and the reduction for proventriculus and small intestine occurred from 3 h. A noticeable effect of feed withdrawal on pH for breast muscle at 3 h postmortem occurred only when chicks were fasted for 3 h of which pH (6.05) was significantly (p<0.05) higher than that for other groups including the control (5.74). There was a linear tendency of higher lightness (Hunter L* value) numerically for chicks fasted for longer periods. The highest coefficient of determinations of regression models to estimate weight loss as a function of fasting period and body weights were achieved, when the models included both linear and quadratic terms for fasting period, and linear term for both 1.5 ($R^2=0.76$) and 2.5 kg ($R^2=0.78$) body weight groups. Given the practical aspect, approximately 1.5 kg of body weight is dominant, weight loss could be predicted by the following function; live weight $loss=26.6-0.28{\times}(fasting period)^2+12.34{\times}pasting\;period-0.012{\times}body\;weight$, $R^2=0.76$. Current data implied that the optimum fasting time for pre-slaughter chicks varied depending on slaughter weight; 6 and 9-h fasting were recommendable for 2.5 and 1.5 kg chicks, with little effect on objective meat color.