• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.8
• /
• pp.761-766
• /
• 2010

This study was aimed to propose La(III)-zeolite composite which can effectively and simultaneously remove ammonia and phosphate in confined water bodies such as lakes and ponds. The optimum ratio of La(III):zeolite for the simultaneous removal of ammonia and phosphate was 0.0048 La(III) g:1 zeolite g. The drying temperature of La(III)-zeolite composite severely affected phosphate adsorption showing optimum condition at room temperature. It was revealed that the optimum dosage of La(III)-zeolite composite was 4.052 g/L at adsorption time of 90 min. The presence of alkalinity in aqueous solution brought positive effect on phosphate adsorption. Detachment of La(III) from La(III)-zeolite composite, which was dried at room temperature, was not observed in aquous solution. It indicates that La(III)-zeolite composite could effectively block phosphate released from sediment.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.139-145
• /
• 1998

This study was performed to provide fundamental data on the optimum manufacture condition of oleoresin using citron peel. Oleoresin was extracted from freeze-dried or hot air dried citron peels using various solvents (hexane, ether, dichloromethane, acetone. and methanol), mixing ratio, extraction temperature, and time. As a result, optimum extraction conditions of oleoresin were: solvent mixing ratio 1:10 (w/v), extraction time 2 hours, and extraction temperature $60^{\circ}C$ when used methanol, and their dichloromethane 1:10 (w/v), 4 hours and $20^{\circ}C$, respectively. At optimum extraction conditions, the yield of oleoresin was shown that 35.79% at hot air drying samples, 32.04% at freeze-dried ones when extracted by methanol, but shown 5.86% and 6.16% when used dichloromethane respectively. The number of volatile components present in citron oleoresin were confirmed as thirty two in methnol extracion method and twenty nine in dichloromethane extraction method by GC and GC/MS, respectively. But, in the kinds and amounts of volatile flavor components, relatively greater numbers of volatiles were identified in freeze-dried sample extracted by dichloromethane compared with other methods. In freeze-dried sample extracted by dichloromethane, volatile components of citron oleoresin predominantly occupied by limonene and ${\gamma}-terpinene$ with about 85%. Other important compounds were shown hydrocarbons. such as ${\alpha}-pinene$, myrcene, terpinolene, ${\beta}-farnesene\;and,\;{\delta}-elemene$, and linalool as alcohols.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.1
• /
• pp.81-85
• /
• 1989

One of the most important cultural techniques of pearl millet (Pennisetum americanum (L.) Leeke) is to encourage rapid and uniform emergence of seedlings to establish good stand and to let them grow well. Thus the objectives of the study were to investigate the effects of pre-sowing seed soaking and planting depth on dormancy breaking, germination and emergence of the seedlings, and to estimate the optimum planting season of pearl millet in Suwon, Korea. The seeds with dormancy germinated 99 to 100 percent when soaked in the H$_2$O$_2$ 1％ solution for 24 hours and rinsed with pure water, but germinated only 38％ and 83％ when soaked in pure water for 24 hours just after harvest and drying, and one month later from the harvest time, respectively. The seeds of Australia inbred line did not germinate at the constant 10$^{\circ}C$, but germinated at the constant 11$^{\circ}C$. It also was possible to estimate the optimum planting season by applying minimum temperature 11$^{\circ}C$ for germination. The minimum air temperature reached from late April in Suwon, Korea in regular years but fluctuated from late April to early May in 1986 and 1987. Thus, the safe planting season was mid-May for rapid and uniform germination of pearl millet seed. The optimum depth of planting was 2∼4cm under the optimum soil moisture condition, and 4 to 6 cm under the drier soil moisture condition. Subcoleoptile internode(mesocotyle) length increased according to increased depth of planting. Seedling crown placement also became deeper due to deeper planting of the seeds. The subcoleoptile internode length and seedling crown depth were positively correlated with actual planting depth, indicating that deeper planting would be not good for appropriate adventitious root and tiller development.

• Culinary science and hospitality research
• /
• v.20 no.6
• /
• pp.211-222
• /
• 2014

This study was performed to identify the quality characteristic of Platycodon grandiflorum for blanching(1, 2, 3 min), drying(5, 10, 15 min) conditions and thawing methods($4^{\circ}C$, $25^{\circ}C$, running water). The color, moisture contents, pH, hardness, viable cell count of blanched Platycodon grandiflorum were lower than those of native Platycodon grandiflorum. The sensory properties of blanched Platycodon grandiflorum for blanching and drying time showed the most highly evaluated in terms of texture. The optimum blanching and drying times selected for producing of frozen Platycodon grandiflorum were 1 min, 5 min. At this condition, the blanched Platycodon grandiflorum was frozen at $-40^{\circ}C$. After thawing of frozen Platycodon grandiflorum, the thawing time was the shortest in the case of thawing in running water, and drip loss was the lowest. The color, hardness and sensory properties did not significantly differ with different thawing methods. These results show that thawing in running water is the most suitable for frozen Platycodon grandiflorum.

• Journal of Biosystems Engineering
• /
• v.28 no.5
• /
• pp.411-420
• /
• 2003

Physical and cultural properties were investigated on the rice-seed pellets made by the pelleting machine(Yu, 2003) as the changes with mixing ratios of soil to rice seed of 6 : 1, 7 : 1, and 8 : I, and rotating speeds of forming rolls of 7, 10, and 13 rpm. Average weight, average diameter, and average sphericity of the pellets were 1.70 g, 12.0 ㎜, and 99.1 ％, respectively. Average number of seeds per pellet was more than 3, and almost all pellets had more than 3 seeds in the cases of mixing ratios of 6 : 1, and 7 : 1 at the forming rolls' speed of 7 rpm. Gradual drying was needed because rapid drying caused cracks on surface of the pellets. Compression strength of the pellets dried in shady room was in the range of 132 ∼ 152 N, which was enough for handling. Comparing with the previous pellets(Park, 2002), average number of seeds per pellet, ratio of pellets including more than 3 seeds, and compression strength increased due to the effects of pressure feed of pellet materials, and improvements of the forming rolls. Emergence ratio of the pellets made at the mixing ratio of 6 : 1 and the forming rolls' speed of 7 rpm, was 100 % on dry paddy and was 97 % on flooded paddy surface. Good growth characteristics, and yield except number of seedling stand and ratio of missing plant were shown in planting of the pellets made at the mixing ratio of 7 : 1 and the forming rolls' speed of 7 rpm on flooded paddy surface field. Considering the cultural results, the mixing ratio of 6 : 1, and the forming rolls' speed of 7 rpm seems to be optimum operating condition for the improved pelleting machine.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.26 no.1
• /
• pp.29-38
• /
• 2008

Print-through is one of the most important attributes of print quality and has long been a subject to study. However, some aspects of print through are still in need to be enlighten. In this paper, different kinds of evaluating methods for print through are compared using densitometry, brightness, and image analysis. Printing conditions including ink feed, drying condition, and emulsification rate are systematically changed to effect print-through both on uncoated and coated commercial papers. Also several inks from different makers are introduced and compared in terms of print-through propensity. From the results, densitometry is not a good indicator for print through on the papers in this study. Ink feed has a strong effect on print through, especially for uncoated paper and should be considered in a point of optimum ink feed level in real world. Contribution of faster ink(oil) absorption seems to be more competitive than that of ink(oil) evaporation resulting in severer print-through for hot drying process. It is shown that ink-water emulsification rate increases print through at mild level but easy to decrease it with lower density due to the increase of water contents in emulsion. It is believed that the effect of absorption overwhelms that of density drop at mild emulsification level. This study does not include the effect of ink attributes in detail but shows that distinctive differences in print through may be resulted from various ink-makers and is finalized with some suggestions.

• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.188-194
• /
• 1997

Wet gel with surface modification by TMCS was redispersed in EtOH and redispersed silica sol for coat-ing was prepared. After spin coating of redispersed sol was conducted on silicon substrate, processes of drying(8$0^{\circ}C$) and heat treatment(>25$0^{\circ}C$) were, followed at ambient pressure. The influence of heat treat-ment of properties of film was observed, changing temperature at heat treatment. The optimum redisp-ersion condition for stable silica sol was wet gel:EtOH=1g:110$m\ell$ and the concentration and viscosity of redispersed silica sol with average particle size of 30nm were 0.11 M, 2.0-2.2 cP respectively. Crack-free thin film with the refractive index of 1.14 and thickness of 400 nm was obtained through drying at 8$0^{\circ}C$ and subsequent heat treatment at 45$0^{\circ}C$ for 2 hrs respectively after spin coating of 1500rpm, 10 times.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.14-20
• /
• 2001

On the bending process, metal-strap plays an important role in dispersing the stress generated in wood. Therefore, the metal-strap has more influence on the property of bentwood materials. The effect of the metal-strap thickness for bentwood was examined. The effect of metal-strap on the bending properties of Korean red pine(Pinus densiflora Sieb. et Zucc.)was investigated in this research. The metal-strap thickness is divided into 4 kinds such as 1.0, 0.8, 0.6, 0.4 mm. The specimens were selected by grain such as annual ring angles, flat grain and half-edge grain specimens. As a result of this study, the bending ability of 1.0, 0.8 mm, thickness of half-edge grain specimens was better than flat grain specimens but the result of 0.6, 0.4 mm were reversed. The bending ability of half-edge grain was better than flat grain and the grade was higher. When the processed specimens were dried, the radius of curvature(ROC) was decreased became drying-stress was not perfectly dispersed. An optimum drying-condition would deminish this phenomenon.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.263-271
• /
• 2010

e-Printing is a new manufacturing technology for electronic products and is based on traditional printing technology. The electronic products require a large area to facilitate printing and to be economical. A gravure printing system that supports a roll to roll (R2R) manufacturing process can be used to reduce the cost and to achieve the required accuracy. Many factors such as drying method, drying temperature, tension,-printing velocity, ink viscosity, ink conductivity, pattern accuracy, and dot geometry influence the performance of printed electronics. These factors are closely interrelated. The optimum condition for printing must be determined to enhance the performance of the printed electronics. In this study, lines and areas are printed using a gravure printer with conductive ink under different conditions of the above mentioned factors. The results are analyzed to investigate the influence of various factors on the performance of the printed electronics.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.2
• /
• pp.47-56
• /
• 2008

The objective of this research is to evaluate the optimum recycling methods for the sewage sludge cakes at different microwave power-settings and for different periods of time. The dehydrated sewage sludge cakes used in this study was obtained from N wastewater treatment plan in the P City. The beginning drying processes were carried out in a microwave oven with 2,450 MHz frequency and power ranges of 1kW to 4 kW. The continuous conveyer drying system was also operated with 2,450 MHz frequency and power setting, ranging from of 1 kW to 6 kW. Initial moisture content of the sewage cake is 78~80%, and the moisture content decreased rapidly up to 0.2~2(wt%) within short periods due to breaking the cell walls. This study is also conducted to evaluate the characteristics of sewage sludge cakes with respect to important physical parameters effect on the thermal kinetics for evaporation water in the sludge which are operation times, moisture contents, drying rates, input amounts, flow rates and calorific values. It takes 60 minutes and 120 minutes to reach the critical moisture contents with power setting of 4 kW for 3kg/min and 6kg/min of the flow rates respectively. It takes 120 minutes and 110 minutes to reach the critical moisture contents with flow rates of 2.5 cm/min and sludge input of 6kg/min for the power settings of 4 kW and 6 kW respectively. The most effective value of the power for drying the sludge is 4 kW. Operation with 6kg/min and 4kW on 2cm of the sludge thickness can be effectively and inexpensively to reach the critical moisture contents, when you compare 2cm of the sludge thickness with 1cm and 3cm of the sludge thickness.