Journal of the Korean Wood Science and Technology
- 제29권3호
- /
- Pages.14-20
- /
- 2001
- /
- 1017-0715(pISSN)
- /
- 2233-7180(eISSN)
Effect of a Metal-strap Thicknesses on the Bending Process
- Jung, In-Suk (Department Group of Forestry and Wood Sci. &Tech., College of Agriculture, Kyungpook National University) ;
- Kim, Jung-Whan (Department Group of Forestry and Wood Sci. &Tech., College of Agriculture, Kyungpook National University) ;
- Lee, Weon-Hee (Department Group of Forestry and Wood Sci. &Tech., College of Agriculture, Kyungpook National University) ;
- Chang, Jun-Pok (Division of Life Resource Science, Joongbu University) ;
- Bae, Hyun-Mi (Division of Architecture & Landscape Architecture, Mokpo National University)
- 투고 : 2001.06.04
- 심사 : 2001.08.24
- 발행 : 2001.09.30
초록
On the bending process, metal-strap plays an important role in dispersing the stress generated in wood. Therefore, the metal-strap has more influence on the property of bentwood materials. The effect of the metal-strap thickness for bentwood was examined. The effect of metal-strap on the bending properties of Korean red pine(Pinus densiflora Sieb. et Zucc.)was investigated in this research. The metal-strap thickness is divided into 4 kinds such as 1.0, 0.8, 0.6, 0.4 mm. The specimens were selected by grain such as annual ring angles, flat grain and half-edge grain specimens. As a result of this study, the bending ability of 1.0, 0.8 mm, thickness of half-edge grain specimens was better than flat grain specimens but the result of 0.6, 0.4 mm were reversed. The bending ability of half-edge grain was better than flat grain and the grade was higher. When the processed specimens were dried, the radius of curvature(ROC) was decreased became drying-stress was not perfectly dispersed. An optimum drying-condition would deminish this phenomenon.
키워드