Journal of Korean Society of Environmental Engineers (대한환경공학회지)

Korean Society of Environmental Engineers (대한환경공학회)
권호 표지

Development of La(III)-zeolite Composite for the Simultaneous Removal of Ammonium Nitrogen and Phosphate in Confined Water Bodies

호소수내 암모니아성 질소 및 인 동시 제거를 위한 란탄-제올라이트 복합체 개발

  • Paek, Joo-Heon (Department of Environmental Engineering, Chungbuk National University) ;
  • Kim, Keum-Yong (Department of Environmental Engineering, Chungbuk National University) ;
  • Ryu, Hong-Duck (Department of Environmental Engineering, Chungbuk National University) ;
  • Lee, Sang-Ill (Department of Environmental Engineering, Chungbuk National University)
  • Received : 2010.02.26
  • Accepted : 2010.08.30
  • Published : 2010.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study was aimed to propose La(III)-zeolite composite which can effectively and simultaneously remove ammonia and phosphate in confined water bodies such as lakes and ponds. The optimum ratio of La(III):zeolite for the simultaneous removal of ammonia and phosphate was 0.0048 La(III) g:1 zeolite g. The drying temperature of La(III)-zeolite composite severely affected phosphate adsorption showing optimum condition at room temperature. It was revealed that the optimum dosage of La(III)-zeolite composite was 4.052 g/L at adsorption time of 90 min. The presence of alkalinity in aqueous solution brought positive effect on phosphate adsorption. Detachment of La(III) from La(III)-zeolite composite, which was dried at room temperature, was not observed in aquous solution. It indicates that La(III)-zeolite composite could effectively block phosphate released from sediment.

본 연구에서는 인 및 암모니아 흡착에 효과적인 La(III) 및 제올라이트를 적절히 결합하여 호소수 및 연못 등의 질소 및 인을 동시에 효과적으로 제거할 수 있는 La(III)-zeolite 복합체 개발을 목적으로 하였다. 연구 결과 La(III)-zeolite 복합체 제조 시 최적 결합 비는 0.0048 La(III) g:1 zeolite g 인 것으로 나타났다. 복합체 제조 시 건조 온도는 인 흡착에 결정적인 영향을 주는 것으로 나타났는데 상온 건조가 가장 적합한 것으로 관찰되었다. La(III)-zeolite 복합체 최적 주입량은 4.052 g/L로 나타났다. La(III)-zeolite 복합체 주입 시 최적 흡착 시간은 90 분으로 나타났다. 수용액상에서 알칼리도의 존재는 암모니아 및 인흡착에 긍정적인 영향을 주는 것으로 관찰되었다. 상온에서 건조시킨 La(III)-zeolite 복합체는 용액 내에서 La(III)의 탈리 현상이 관찰되지 않았으며, 이는 La(III)-zeolite 복합체가 인을 흡착하여 바닥에 가라앉은 후 바닥으로부터 용출되는 인을 효과적으로 차단 할 수 있음을 의미한다.

Keywords

References

  1. 허우명, 김범철, 조규송, "소양호 부영양화에 따른 N/P비의 변화와 남조류 Bloom," 한국육수학회지, 24(4), 283-288 (1991).
  2. 윤명희, 김소연, 왕창근, "부영양화 방지를 위한 정석탈인법의 응용성 제고 연구," 충남대학교 환경문제연구소, 20, 85-93(2002).
  3. 김창원, 윤봉일, "환경미생물학," 동화기술, p. 24(1992).
  4. 류재근, "호소 부영양화 방지기술의 현황과 전망," 대한환경위생공학회지, 7(1), 35-44(1992).
  5. Jenkins, D.and Tandoi, V. "The applied microbiology of enhanced biological phosphate removal accomplishments and needs," Water Res., 25(12), 1471-1478(1991). https://doi.org/10.1016/0043-1354(91)90177-R
  6. Ahamad M., Shaikch, H. and Dixit, S. G., "Removal of phosphate from waters by precipitation and high gradient magnetic separation," Water Res., 25(6), 845-852(1992).
  7. Firsching, F. H., "Solubility products of the trivalent Rare- Earth arsenates," J. Chem. Eng. Data, 37(4), 497-499(1992). https://doi.org/10.1021/je00008a028
  8. Rodd, M., Greenop, B., Goss, Z., Dougls, G. and Adeney, J., "Application of PhoslockTM, and innovatice phosphorus binding clay, to two Western Australian waterways: Preliminary findings," Hydrobiologia, The Interactions between Sediments and Water, 494, 237-243(2003).
  9. F. Haghseresht, Shaobin Wang, D. D. Do, "A novel lanthanum- modified bentonite, Phoslock, for phosphate removal from wastewaters," Appl. Clay Sci., 46(4), 369-375(2009). https://doi.org/10.1016/j.clay.2009.09.009
  10. Sherry, H. S. and Walton, H. F., "The ion exchange properties of zeolites," J. Phys. Chem., 71, 1457(1975)
  11. Pebalan, R. T. and Bertetti, F. P., "Cation-exchange properties of natural zeolites," Geochemical Society, 453-518(2001).
  12. Andrew, D. E., Lenore, S. C., Eugene, W. R. and Arnold, E. G., "Standard methods for the examination of water & wastewater," 21st Edition., APHA, AWWA, WEF(2005).
  13. Zhigalkina, I. A., Nikolaeva, T. D., Suponitskii, Yu. L. and Polyak, B. I., "Synthesis of lanthanum chromite using the sol-gel method," Glass and Ceramics, 55, Nos 5-6(1998).