• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 제5회 압출 및 인발가공 심포지엄
• /
• pp.7-14
• /
• 2002

To carry out the analysis of the extruding products, it is necessary to get the optimum computation of extruding force for the extrusion. The existing numerical models of the extrusion may be large different from the actual conditions. In this study, accurate theoretical analysis of the extrusion forming and optimum extruding force should be subjected. It is to develop the numerical models which describes the optimum extrusion force. Therefore, the results should improve accuracy of extrusion forming and cause the energy saving for the extrusion.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.237-241
• /
• 1998

This study is concerned with the optimum blank design which is able to minimize earing phenomena. A new analytic method is proposed to determine the optimum blank shape only using the tension test and standard deep drawing tests. Introducing a dimensionless parameter related to the earing and using a Fourier analysis, the optimum blank shape can be obtained by R-value and the tested results. The theoretical results by the proposed method are good agreement with the experimental results through several deep drawing tests using steel as working materials.

• 대한기계학회논문집A
• /
• 제30권3호
• /
• pp.302-309
• /
• 2006

Effective mixing plays a crucial role in microfluidics for biochemical applications. Owing to the small device scale and its entailing the low Reynolds number, the mixing in microchannels proceeds very slowly. In this work, we optimize the configuration of obstacles in the Y-channel mixer in order to attain maximum mixing efficiency. Before the optimum design, mixing characteristics are investigated using unstructured grid CFD method. Then, the analysis method is employed to construct the approximate analysis model to be used in the optimization procedure. The main optimization tool in the present work is sequential quadratic programming method. Using this approximate optimization procedure, we may obtain the optimum layout of obstacles in the Y-channel mixer in an efficient manner, which gives the maximum mixing efficiency.

• 한국공작기계학회논문집
• /
• 제11권3호
• /
• pp.45-50
• /
• 2002

This study is an investigation far the Am optimum design using FEA. We write out program which express ADS perfectly and reduce the required time far correcting of model to the minion in solution md manufacture result. We complete algorithm which can plan optimum forming of model by feedback error information in CAE. Then we contract model by feedbback date obtaining in solution process, repeat course following stress solution again iud do modeling rachet wheel for optimum forming. That is our aim. In cachet wheel, greatest equivalence strss originates in key groove comer and KS standard is proved the design far security.

• 무역상무연구
• /
• 제13권
• /
• pp.283-302
• /
• 2000

The firms aim to acquire services and costs advantage from logistics outsourcing strategy. But it is very important to select optimum service provider. A checklist of the criteria for the evaluation of service providers follows : service quality, low cost, logistics information system, service network, financial stability, investments in plant and equipment, management attitude and lookout for the future strategic fit, cultural and psychological barriers etc. Also, a 8-step implement of logistics outsourcing strategy will be of help for maximizing benefits of logistics outsourcing. It follows : 1-step : logistics environment analysis, 2-step : check service provider availability, 3-step : logistics outsourcing determinant analysis, 4-step : select of optimum service provider, 5-step : contract with optimum service provider, 6-step : identify of remaining barriers, 7-step : performance of logistics outsourcing, 8-step : evaluation.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권4호
• /
• pp.139-144
• /
• 1999

Based on the recent developments of the reliability-based structural analysis and design as well as the extending knowledge on the probabiliistic characteristics of load and resistances, the probability based design criteria have been successfully developed for many standards. Since the probabilistic characteristics depend highly on the local load and resistances, it is recognized to develop the design criterion compatible with domestic requirements. The existing optimum design methods, which are generally based on the structural theory and certain engineering experience, do not realistically consider the uncertainties of load and resistances and the basic reliability concepts. This study is directed to propose a optimum design based Expected Total Cost Minimization on P.S.C Box Girder Bridge system which could possibly replace optimum design based traditional provisions of the current code, based on the Neldel-Mead Method reliability theory.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권5호
• /
• pp.514-521
• /
• 2007

There has been considerable interest recently in the topic of renewable energy. This is primarily due to concerns about environmental impacts. Moreover, fluctuating and rising oil prices, increases in demand, supply uncertainties and other factors have led to increased calls for alternative energy sources. Small hydropower, especially using water supply system, attracts high attentions because of relatively lower cost and smaller space requirements to construct the plant. Moreover. newly developed positive displacement turbine has high acceptability for the system. Therefore, the purpose of this study is focused on the examination of the performance characteristics and proposition of a optimum design method of the turbine for the improvement of the performance. The results show that newly proposed optimum design method for the turbine has high accuracy of performance prediction and good applicability for the performance improvement of the turbine.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1163-1164
• /
• 2013

• Structural Engineering and Mechanics
• /
• 제63권5호
• /
• pp.607-615
• /
• 2017

This study presents optimum design of plane steel bridges considering corrosion effect by using teaching-learning based optimization (TLBO) method. Optimum solutions of three different bridge problems are linearly carried out including and excluding corrosion effect. The member cross sections are selected from a pre-specified list of 128 W profiles taken from American Institute of Steel Construction (AISC). A computer program is coded in MATLAB to carry out optimum design interacting with SAP2000 using OAPI (Open Application Programming Interface). The stress constraints are incorporated as indicated in AISC Allowable Stress Design (ASD) specifications and also displacement constraints are applied in optimum design. The results obtained from analysis show that the corrosion effect on steel profile surfaces causes a crucial increase on the minimum steel weight of bridges. Moreover, the results show that the method proposed is applicable and robust to reach the destination even for complex problems.

• 한국통신학회논문지
• /
• 제40권12호
• /
• pp.2324-2330
• /
• 2015

충격성 잡음하의 블라인드 신호처리 분야에서 최대 상호 코렌트로피 알고리듬 (MCC)이 MSE 기반의 알고리듬에 비해 우수한 성능을 보인다. 그러나 MCC 알고리듬에 대한 최적 가중치 조건들이나 충격성 잡음에 대한 내성과 관련된 특성들은 아직 충분히 연구되지 못한 상태이다. 이 논문에서는 MSE기반의 LMS 알고리듬과 비교를 통해 MCC의 최적 가중치의 성질을 분석하여 MCC 알고리듬의 최적 가중치가 MSE기반의 LMS 알고리듬과 같다는 보인다. 또한 MCC의 최적 가중치가 충격성 잡음 하에서도 동요 없이 안정을 유지하는 요인이 입력 크기 조정에 있다는 것을 시뮬레이션을 통해 입증하였다.