• Journal of the Optical Society of Korea
• /
• 제16권1호
• /
• pp.6-12
• /
• 2012

We present the optical models and calculation results of thin-film organic solar cells (OSCs) at oblique incidence of light, using the transfer matrix method. The simple expression for the optical power dissipation is derived at oblique incidence for s- and p-polarized light. The spatial distribution of the electric field intensity, the optical power density, and the optical power dissipation are calculated in both s- and p-polarized light with respect to the incidence angle. We identify how the light absorption efficiency for p-polarized light becomes relatively larger than that for s-polarized light as the incidence angle increases.

• 전자공학회논문지
• /
• 제50권1호
• /
• pp.97-101
• /
• 2013

There is a growing need for optical communication systems that convert large volumes of data to optical signals and that accommodate and transmit the signals across long distances. Digital optical communication consists of a master unit (MU) and a slave unit (SU). The MU transmits data to SU using digital optical signals. However, digital optical units that are commercially available or are under development transmit data using two's complement representation. At low input levels, a large number of SSOs (simultaneous switching outputs) are required because of the high rate of bit switching in two's complement, which thereby increases the power noise. This problem reduces the overall system capability because a DSP (digital signal processor) chip (FPGA, CPLD, etc.) cannot be used efficiently and power noise increases. This paper proposes a change from two's complement to a more efficient method that produces less SSO noise and can be applied to existing digital optical units.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.259-260
• /
• 2007

In this paper, we propose a novel computational integral imaging reconstruction (CIIR) method using round-type mapping model. Proposed CIIP method can overcome problems of non-uniformly reconstructed images caused from the conventional method and improve the resoulution of 3-D images. To show the usefulness of the proposed method, both computational experiment and optical experiment are carried out and their results are presented.

• 한국광학회지
• /
• 제30권6호
• /
• pp.230-236
• /
• 2019

저렴한 retro-반사지와 미소 전자 기계 시스템(micro electro-mechanical system, MEMS) 거울을 이용한 실내용 무선 광 통신용 위치 탐색 및 자동 링크 정렬 방법을 제안하고 실험하였다. 직접적인 가시선(line of sight, LOS) 확보를 위하여 retro-반사지에서 돌아온 빛으로부터 수신단 위치를 파악하고 MEMS 거울을 통한 빔 조종으로 통신 링크를 자동 정렬하였다. 자동 정렬된 광 링크를 통하여 7 m 전송 거리에서 2.5 Gb/s NRZ 신호를 전송하여 비트 에러율 10^-12에서 수신 감도 -31.87 dBm의 성능을 가졌다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1350-1352
• /
• 1996

The purpose of image sequence coding is to reduce the spatio-temporal redundancies. For the spatial redundancies, we can use the transform coding such as DCT. In this paper, the optical flow method is applied to solve the problem of temporal redundancies. There are several estimation methods like block matching method and pel-recursive method. Block matching method is easy for a hardware implementation because of the computational simplicity. So, it is now used as the estimation method in MPEG-l, MPEG-2, and H.261. We compared the merits and demerits of the optical flow method and the block matching method in this paper.

• Journal of Mechanical Science and Technology
• /
• 제18권7호
• /
• pp.1236-1245
• /
• 2004

In this study, an optical imaging method was developed for the measurements of the sizes and velocities of droplets in sprays. Double-exposure single-frame spray images were captured by the imaging system. An image processing program was developed for the measurements of the sizes and positions of individual particles including separation of the overlapped particles and particle tracking and pairing at two time instants. To recognize and separate overlapping particles, the morphological method based on watershed segmentation as well as separation using the perimeter and convex hull of image was used consecutively. Better results in separation were obtained by utilization of both methods especially for the multiple or heavily-overlapped particles. The match probability method was adopted for particle tracking and pairing after identifying the positions of individual particles and it produced good matching results even for large particles like droplets in sprays. Therefore, the developed optical imaging method could provide a reliable way of analyzing the motion and size distribution of droplets produced by various sprays and atomization devices.

• 한국정밀공학회지
• /
• 제13권9호
• /
• pp.38-45
• /
• 1996

The optical triangulation method has been used as a non-contact measuring method of three dimensional object whape. But this measuring method has narrow measuring range, non-linearity on steep slope surface and shadow effect. In this study, we discussed a new optical measurement method to overcome these kinds of demerits. The advantage of this new method is that it is possible to measure precisely the object shape having the steep slope surface without shadow effect. As exper- imental results, maximum displacement error was 200 .mu. m over the whole measuring when the incident angle on the object surface was within 60 degree.

• 한국통신학회논문지
• /
• 제23권4호
• /
• pp.787-795
• /
• 1998

본 논문에서는 이동물체의 움직임 추정을 위한 옵티컬 플로우(Optical Flow: OF)의 계산에 필요한 그레디언트(Gradient)의 연산 속도를 개선하고. OF와 에지의 논리연산에 의하여 이동물체의 움직임 정계를 추정할 수 있으며 잡음이 있는 영상에서도 이동물체를 추정할 수 있는 방법을 제안한다. 이것은 저레벨에서 OF와 에지를 논리 연산하므로써 불확실한 배경에서 이동물체를 식별하고 물체를 추적하는 방법으로 기존의 이동물체 추정 알고리즘을 간소화시킨 것이다. 또한, 그레디언트 연산속도를 개선한 본 논문의 방법 I과 방법 II를 이용하여 그레이레 벨값의 변화가 있는 영상에 대하여 시뮬레이션을 행하였다. 그레디언트 연산에 걸리는 전체적인 시간을 평균한 결과 방법 I 은 기존의 방법보다 12% 연산속도가 개선되었고, 방법 II는 37% 연산속도가 개선되었다.

• 전자공학회논문지B
• /
• 제33B권3호
• /
• pp.109-119
• /
• 1996

We propsoed a multiplexed optical correlation filter method for an optical parallel addition based on symbolic substitution. In the proposed mthod, we used redundant binary number which was easy to minimize the number of the symbolic substitution rules. We chose MACE filter which had very low sidelobes and good correlation peak compared with SDF filter as the optical correlation recognition filter and encoded input numbers properly to increase the discrimination capability. In order to minimize the number of symbolic substitution rules, sixteen input patterns were divided into six groups of the same addition results and six filters for recognizing the input patterns were used. these filters were multiplexed in two MMACE filter planes and the corresponding substitution method was proposed. Through the computer simulation, we confirmed the proposed method was suitable to implement the optical parallel adder.

• Current Optics and Photonics
• /
• 제4권2호
• /
• pp.103-114
• /
• 2020

A new optical asymmetric cryptosystem is proposed by modifying the asymmetric RSA public-key protocol required in a cryptosystem. The proposed asymmetric public-key algorithm can be optically implemented by combining a two-step quadrature phase-shifting digital holographic encryption method with the modified RSA public-key algorithm; then two pairs of public-private keys are used to encrypt and decrypt the plaintext. Public keys and ciphertexts are digital holograms that are Fourier-transform holograms, and are recorded on CCDs with 256-gray-level quantized intensities in the optical architecture. The plaintext can only be decrypted by the private keys, which are acquired by the corresponding asymmetric public-key-generation algorithm. Schematically, the proposed optical architecture has the advantage of producing a complicated, asymmetric public-key cryptosystem that can enhance security strength compared to the conventional electronic RSA public-key cryptosystem. Numerical simulations are carried out to demonstrate the validity and effectiveness of the proposed method, by evaluating decryption performance and analysis. The proposed method shows feasibility for application to an asymmetric public-key cryptosystem.