• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.280-285
• /
• 2007

Based on the multimode fiber taper, a mode size converter for effective optical beam coupling between laser and optical fiber or between the two different optical fibers has been proposed and demonstrated. The device has a multimode input end and a single mode output end. The influence of various parameters, including device structure and launching conditions, on the coupling efficiency has been theoretically analyzed. The theoretical results revealed that the gaussian beam can be coupled into a single mode fiber without considerable insertion loss. The proposed multimode fiber taper has been fabricated using heating and pulling equipment incorporating two micro-torches. Experimental results showed that an optical beam with $50\;{\mu}m$ of large beam size was effectively coupled into single mode fiber through the multimode fiber taper. The insertion loss of the device was 1.3 dB.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.50-55
• /
• 2007

Using the Selective Area Growth (SAG) technology of Metal Organic Chemical Vapor Deposition (MOCVD), we successfully integrated an active device and passive devices on the same substrate. In other words, we integrated a Semiconductor Optical Amplifier (SOA) as an active device and an S-bend waveguide and a Multi Mode Interference (MMI) waveguide as passive devices. The SOA is successfully integrated with passive devices on the same substrate. The Cross-Gain Modulation (XGM) characteristic of the integrated SOA and the loss of an MMI and an S-bend waveguide were measured. Measured XGM characteristics of the SOA showed an extinction ratio of 8.82 dB. The total loss of the MMI and S-bend waveguide was 18 dB.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1729-1733
• /
• 2007

In this paper, we have carried out some tests for analyzing the effects of optical fiber characteristics and piping structures in designing a Customer Cabling System with optical fibers. In this tests, the loss characteristics due to the number of curvatures and the radius of curvature with bending to establish an optical fiber have analyzed particularly. We can confirm that the test results satisfy the current technical regulations in both cases of the number of curvatures and the radius of curvatures. Also, in particular, since there is no loss in an optical cable under the current radius of curvature, that is 30mm, the radius criteria of curvature needs to be revised. These tests results will be so useful to revise and establish a customer cabling system for FTTH.

• Journal of Intelligence and Information Systems
• /
• v.29 no.2
• /
• pp.115-127
• /
• 2023

Video stabilization is one of the camera technologies that the importance is gradually increasing as the personal media market has recently become huge. For deep learning-based video stabilization, existing methods collect pairs of video datas before and after stabilization, but it takes a lot of time and effort to create synchronized datas. Recently, to solve this problem, unsupervised learning method using only unstable video data has been proposed. In this paper, we propose a network structure that learns the stabilized trajectory only with the unstable video image without the pair of unstable and stable video pair using the Convolutional Auto Encoder structure, one of the unsupervised learning methods. Optical flow data is used as network input and output, and optical flow data was mapped into grid units to simplify the network and minimize noise. In addition, to generate a stabilized trajectory with an unsupervised learning method, we define the loss function that smoothing the input optical flow data. And through comparison of the results, we confirmed that the network is learned as intended by the loss function.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12A
• /
• pp.1279-1284
• /
• 2004

In this paper, we propose a novel and simple optical technique for the detection of subcarrier-multiplexed(SCM) labels using optical interleavers. Optical-baseband packet signals with suppressed subcarriers appear at the through-pass port of the optical interleaver and SCM labels with suppressed optical carrier exit from the optical SCM extraction port. Since it does not require optical circulators, this structure shows less insertion loss than the previously proposed optical label detectors. The periodic nature of the interleaver transfer function makes it possible to detect multiple SCM channels simultaneously from an incoming wavelength-multiplexed signal stream. Detection of a 155-Mb/s ASK modulated 9.79-GHz subcarrier using a 10-GHz SCM optical label detector has been performed successfully and verified through optical spectra and bi t-error-rate measurements.

• Korean Journal of Optics and Photonics
• /
• v.3 no.4
• /
• pp.258-265
• /
• 1992

A low loss optical waveguide of $P_{2}O_{5}-SiO_{2}$on Si substrate is produced by using the chemical vapour deposition method of $SiO_2$ thin films used in Si technology. Propagation loss of the waveguide layer was 1.65 dB/cm as produced and reduced down to 0.1 dB/cm after heat treatment at $1100^{\circ}C$. By using laser lithography and reactive ion etching method $P_{2}O_{5}-SiO_{2}$ waveguide was produced and subsequently annealed at $1100^{\circ}C$.As a result of this annealing the shape of the waveguide core was changed from rectangular to semi-circular form, and the propagation loss was reduced as down to 0.03 dB/cm at 0.6328$\mu$m and 0.04dB/cm at 1.53$\mu$m. We think that the mechanism of the reduction in propagation loss during the heat treatment is the following: 1) The hydrogen bonding in waveguide layer, which causes absorption loss, is dissociated and diffused out. 2) The roughness of the interface and the micro-structure of the waveguide layer is removed. 3) The irregularities in the cross-sectional shape of the waveguide which was induced during the lithographic process were disappeared by flowing of the waveguide core.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.2
• /
• pp.68-75
• /
• 2022

In this study, in order to directly evaluate the prestress of the PSC structure, a new sensor module based on the measurement of the deformation of concrete was proposed using hetero-core optical fibers and performance tests were performed. In a hetero-core optical fiber, optical loss occurs when a specific part of the transmission path is bent, and the amount of optical loss changes linearly according to the magnitude of the curvature. In order to confirm the measurement performance of the sensor module and the applicability of the optical fiber, the sensor module was deformed and the light passing through the optical fiber was converted into wattage and measured. It can be seen that the light passing through the optical fiber has a linearity of 0.9333 in relation to the deformation while generating the maximum deformation of 0.5 mm at a rate of 0.12 mm/min in a cylindrical concrete specimen with a diameter of 15 cm and a height of 35 cm in which the sensor module is embedded. Based on the results of this experiment, it is judged that it is possible to directly evaluate the prestress of a PSC structure by embedding a sensor module using a hetero-core optical fiber in the structure and measuring the compression deformation in concrete. It is judged that it can be used as useful data for the development of a sheath tube integrated sensor module to be applied to be applied to the girder model experiment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.2 no.1
• /
• pp.40-45
• /
• 2007

The repeaterless system can be designed by applying EDFA technology in receiver, transmitter and optical cable in the case of connecting several hundred km from coast to coast, between continents or islands. Because of no repeater the repeaterless system do not need power system to feed laser diode in repeater for signal amplification and cooper tuber in submarine cable. So we can be configured more reliable and economical compared to repeater system. But lower loss optical fiber must be used to get enough signal amplitude without the amplification of repeater. This report consider long distance optical repeaterless system by reflecting the limitation factor of optical amplification.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.178-184
• /
• 1998

Optical fiber coupler is a crucial optical passive component for optical transmission systems. In this paper, we fabricate wavelength insensitive optical coupler(WIC), of two types for which the processing procedures are complicate and difficult. These couplers are fabricated by two optical fibers having either different fiber parameters or different cladding diameters. To clarify the validity, we measure the optical characteritics and compare to the data of theoretical simulation. The experiment results ref#eat that it has uniformity of about 1.0 dB and excess loss of less than 0.1 dB in the range of $1310{\pm}40nm\;and\;1550{\pm}40nm$.

• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.578-582
• /
• 2003

We propose a novel structure of wavelength selective optical add/drop module comprising two tap couplers and a fiber Bragg grating. The device has unique features including a simpler structure and a lower cost of implementation as compared with existing devices for the same operation. The module performance has been measured and analyzed experimentally. The implemented prototype module shows good performance with no-crosstalk power penalty in a 155 Mbps per channel wavelength-division-multiplexing transmission system but suffers from a relatively high loss of 3.5 ㏈ and 21 ㏈ for transmitted and dropped channels, respectively. While the dropped channel extinction ratio was more than 25 ㏈, the transmitted channel extinction ratio was more than 35 ㏈.