• Korean Journal of Optics and Photonics
• /
• v.21 no.1
• /
• pp.6-11
• /
• 2010

Fluorescent photopolymer film was prepared with composition containing acrylate monomer, binder, a visible light sensitive photo initiator, and fluorescent anthracene polymer. A fluorescent grating pattern was inscribed on the photopolymer film using a 2-beam coupling method. A 514 nm laser was coupled to generate a beam-interference pattern. A highly fluorescent diffractive line pattern was formed on the fluorescent photopolymer within 30 sec. of exposure. The fluorescence intensity was highly enhanced in the patterned area, possibly due to the change in the environment of the fluorescent polymers by the photo-polymerization of monomers. Under a photo-mask, a gap electrode pattern was formed of fluorescent gratings with a sub-micron scale, which was matched well to the calculated value ($2.5\;{\mu}m$ and $0.6\;{\mu}m$) based on the refractive index of the photopolymer and beam incident angle ($3.4^{\circ}$, $15^{\circ}$) to the photopolymer surface.

• Korean Journal of Optics and Photonics
• /
• v.33 no.1
• /
• pp.22-27
• /
• 2022

We fabricate a polarization-independent dielectric multilayer thin-film diffraction grating for a spectral-beam-combining (SBC) system with a simple grating structure and low aspect ratio. Due to the refractive index and thickness error of the manufactured thin films, the diffraction efficiency of the fabricated diffraction grating was lower than that of the design. The causes of the errors were analyzed, and it was confirmed through simulation that diffraction efficiency could be compensated through an additional coating on the manufactured diffraction grating. As a result of sputtering an additional Ta₂O₅ layer on a fabricated diffraction grating, the diffraction efficiency was corrected and a maximum 91.7% of polarization-independent diffraction efficiency was obtained.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.861-864
• /
• 2009

The authors have developed the display system which can be viewed from any direction. In this paper, we propose an omni-directional 3D display system for cooperative activity on a round table.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7A
• /
• pp.433-439
• /
• 2003

In this paper, we proposed a novel true time-delay (TTD) feeder for phased array antennas (PAAs) using fiber Bragg gratings (FBGs) and fibers coated with Cr/Au film. This structure requires less number of FBGs than the previously proposed FBG TTD feeders since one FBG is replaced with a metal film reflector in a strand of optical delay line connected to each antenna element and also provides the flexible wavelength selection since the metal film shows wide reflectance spectrum. A TTD for 10 GHz linear PAAs capable of steering beams in three different directions at 0$^{\circ}$and $\pm$30$^{\circ}$has been built. Experimental results on time delays are in good agreement with those calculated at all the steering angles. A 10 GHz linear array antenna with eight antenna elements red from the proposed TTD has been designed and the far-field radiation pattern or this antenna has been obtained by simulation.

• Korean Journal of Optics and Photonics
• /
• v.17 no.4
• /
• pp.317-322
• /
• 2006

A polymeric arrayed waveguide grating (AWG) has been proposed and demonstrated by exploiting the nanoimprint method. A PDMS(polydimethylsiloxane) stamp with device patterns engraved was developed out of a master mold made of quartz glass. The device was fabricated by transferring the pattern in the PDMS stamp to a spin-coated polymer film without using any etching process. The device had 8 output channels, while the center wavelengths of each output channel were positioned from 1543.7 nm to 1548.3 nm with the spacing of 0.8 nm. The achieved average channel crosstalk and the 3-dB bandwidth were about 10 dB and 0.8 nm respectively.

• Journal of the Korean Physical Society
• /
• v.73 no.11
• /
• pp.1698-1702
• /
• 2018

We simulate the light transmission through an extremely small nanoscale aperture having a 10 nm diameter punctured in a metal film positioned at the center of a plasmonic bull's eye grating. A considerable directive emission of transmitted light with a divergence angle of 5.7 degrees was observed at $10{\mu}m$ from the nanohole opening at the frequency of surface plasmon polariton excitation, an confirmed by measuring the distance dependent transmission amplitude. Observations of the electric field in cross-sectional, near-field, and far-field views near-field enhancement associated with the surface plasmon excitation, and the interference of the electric field light through the nanohole in the near-field region is responsible for such a considerable directive emission.

• Korean Journal of Optics and Photonics
• /
• v.9 no.5
• /
• pp.315-320
• /
• 1998

The characteristics and structures of photopolymer are analyzed in this paper, which recently have various applications in optical information processing and optical memory, Especially, Du Pont's photopolymer OmniDex 706 reflection film is used in many experiments of different exposures and incident angles, and analyzed by the diffraction pattern generated by glass plate's reflection beam. With the dark reaction of the monomer in photopolymerization, dynamic parameters are considered due to the variation of exposure time and diffusion time delay after exposure. The performance of diffraction efficiency is improved by 10%, when an exposure time is 6.25 sec, and a diffusion time delay is 2 minute.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.25-28
• /
• 2011

본 논문은 광학 격자 필름과 평행 렌즈를 이용하여 무안경 3D 디스플레이 시스템을 구현한 연구이다. 기존 패럴랙스 배리어 시스템에서는 시점에 따라 크로스토크가 발생하는 영역과 역 입체시 영역을 갖게 되는데 이는 시청자가 정확한 3D영상을 볼 수 없도록 한다. 이를 평행 렌즈를 이용하여 좌, 우안에 해당하는 영상을 평행하게 이동시켜 설계된 격자 필름의 위치에 맺힐 수 있게 하고 격자 필름으로 빛을 굴절시켜 각 눈에 해당하는 영상만 볼 수 있는 영역을 갖게 하였다. 제안하는 방법을 이용해 크로스토크를 회피하여 보다 정확한 3D영상을 볼 수 있도록 한다.

• Korean Journal of Optics and Photonics
• /
• v.3 no.3
• /
• pp.148-154
• /
• 1992

With nonhardening fixer, dichromated bleacher and alcohol drying, the diffraction efficiency of over 71o/c has been achie'{ed for holographic phase gratings in silver halide emulsion. The swollen emulsion of Agfa 8E75 HD film is identified by scanning electron microscope (SEM) after chemical processing. Dichromated bleacher and rapid dehydration using alcohol drying make a strong modulation so that diffraction efficiency is. increased over 20%. The principal characteristic parameters in coupled wave theory are investigated and new modified parameter values are presented by computer simulation. Controlling the emulsion thickness has an important role as a potential source for high diffraction efficiency.ciency.

• Journal of Software Assessment and Valuation
• /
• v.16 no.1
• /
• pp.55-63
• /
• 2020

Lasers for optical broadband communication systems should have excellent frequency selectivity and modal stability. DFB lasers have low lasing frequency shift during high speed current modulation. In this paper, when a refractive index grating and a gain grating are simultaneously present in a DFB laser having a wavelength of 1.55 ㎛, the dielectric film is coated so that reflection does not occur on the right mirror surface, so that ρ_r=0. For the first mode, which requires a minimum gain at the threshold, the beam distribution of the oscillation mode in the longitudinal direction and the radiated power ratio P_l/P_r were analyzed and compared for the cases of the phase of ρ_l=π and π/2. If the phase of ρ_l=π, in order to obtain a low threshold current and high frequency stability, κL should be greater than 8. In the case of the phase of ρ_l=π/2, for low threshold current, κL is necessary to be 1.0, where the oscillation frequency coincides with the lattice frequency. DFB lasers with an anti-reflection coated mirror have excellent mode selectivity than 1.55um DFB lasers with two mirror facets