• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.23-33
• /
• 2012

We studied simultaneously the electronically written data affected in the use of thermal transfer discs and the recoding strategy between recoding drives for the stable long term preservation of optical discs which are commonly used in an electronic data storage device. The most important thing in the archiving preservation might be a choice of a device, however the use of thermal transfer recording discs is not good for long term data preservation because the thermal effect on the recoding data is critical which means that the data are recorded not under best condition but under bad condition. We inspect the strategies of recoding data from 12 brands of optical discs and drives of 7 brands and it turns out the recoding strategy is needed first for the long term preservation of electronic recording data. Thus, without affecting data quality and deformation of optical discs, the choice of optimal disc and drive in recoding data will be a solution for the long term preservation of recoding data.

• Transactions of the Society of Information Storage Systems
• /
• v.4 no.1
• /
• pp.23-28
• /
• 2008

In this paper we suggested the moving magnet type actuator for optical disc drive which has high frequency of flexible mode. Generally, moving magnet type actuator has the advantage for increase the frequency of flexible mode. But it has low driving sensitivity due to the weight of its moving part. To overcome this shortcoming, we designed the model with the closed electromagnetic circuit for tracking direction. In addition, we improved the driving sensitivity and frequency of flexible mode by using of DOE (design of experiment) procedure for EM circuit. Consequently, it is verified that final designed model satisfied with the desired specifications.

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.984-990
• /
• 1999

This paper presents the geometrical methodology to decouple the vibration modes of an elastically supported single rigid body in three-dimensional space. It is shown that the vibration modes can be decoupled by placing the center of elasticity at suitable locations and thereby yielding the plane(s) of symmetry for the given stiffness matrix. The developed methodology has been applied to the actuator supported by the 4-wire suspensions in optical discs, which has one plane of symmetry. For this numerical example, the axes of vibrations have been computed and illustrated with the natural frequencies. The forced response at the objective lens is represented and its geometrical interpretation has been explained as the mutual moment between the axis of vibration and the applied wrench times the line coordinates of the axis of vibration.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.12
• /
• pp.1997-2003
• /
• 2003

Recently, there have been many researches and developments in optical disc drive by high density of track and high access speed. Therefore, the optical pick-up should guarantee highly accurate dynamic characteristics for the wide bandwidth in order to cope with this trend. These demands for optical pick-up actuator can be solved by improvements of lens-holder through the following methods. The first way is the analysis of the sensitivity matrix of design variables for vibration modes after appropriate design parameters are selected like shapes and local dimensions of a lens-holder. The second way is the optimization of design variables by calculating sequential linear programming after the problem of extending bandwidth are converted to problem of minimizing adequate objective function. In the result, modified FE model is obtained through several iterations by finite difference scheme(FDS). While results of the first way show better convergence of the target frequency, the second result shows better reduction of mass increase.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1296-1299
• /
• 2002

We implemented a CD signal processor operated on a CAV 48-speed CD-ROM drive into a VLSI. The CD signal processor is a mixed mode monolithic IC including servo-processor, data recovery, data-processor, and I-bit DAC. For servo signal processing, we included a DSP core, while, for CAV mode playback, we adopted a PLL with a wide recovery range. Data processor (DP) was designed to meet the yellow book specification.［2］So, the DP block consists of EFM demodulator, C1/C2 ECC block, audio processor and a block transferring data to an ATAPI chip. A modified Euclid's algorithm was used as a key equation solver for the ECC block To achieve the high-speed decoding, the RS decoder is operated by a pipelined method. Audio playability is increased by playing a CD-DA disc at the speed of 12X or 16X. For this, subcode sync and data are processed in the same way as main data processing. The overall performance of IC is verified by measuring a transfer rate from the innermost area of disc to the outermost area. At 48-speed, the operating frequency is 210 ㎒, and this chip is fabricated by 0.35 um STD90 cell library of Samsung Electronics.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.794-798
• /
• 2002

This paper deals with a moving coil type linear motor for fast access of the miniature ODD. This slim-line motor is composed of the mover supported by guide mechanism, the coil wound into it, and the yoke attached to the permanent magnet for stator. The driving force is generated by the PM of the stator and the current in the coils of the mover. Magnetic circuit analysis and Finite Element Method are applied to estimate the thrust force at air gap. In order to compare the force characteristics between two methods, various experiment results are applied to verify on a prototype. Also the flexible modes of the motor are predicted through the FEM and the structural components are modified to locate this on high frequency region.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.378.2-378
• /
• 2002

This paper deals with a moving coil type linear motor for fast access of the miniature ODD. This slim-line motor is composed of the mover supported by guide mechanism, the coil wound into it, and the yoke attached to the permanent magnet for stator. The driving force is generated by the PM of the stator and the current in the coil of the mover. Magnetic circuit analysis and Finite Element Method are applied to estimate force at air gap. (omitted)

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.218-223
• /
• 2002

광 디스크 드라이브에서의 서보 제어시스템에는 광 픽업에서 발생된 레이저 빔을 디스크 기록면의 데이터 트랙에 정확히 위치시키기 위한 제어 계를 갖고 있다. 광 디스크의 고배속화에 따른 외란의 주파수 대역의 증가에 따라 더욱 더 높은 샘플링 주파수로 레이저 빔의 위치 제어를 필요로 하게 되고, 여러 가지 알고리즘의 증가로 인해 DSP의 연산 부담은 증가하게 된다. 본 논문에서는 서보 제어에 필요한 알고리즘의 최적화된 하드웨어/소프트웨어 시스템을 구현하고 이를 이용한 실험 결과를 제시한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.507-508
• /
• 2015

본 논문에서는 알 수 없는 주파수의 정현파외란(sinusoidal disturbance)을 가지는 선형시불변(linear time-invariant) 시스템에 대해 그 외란의 주파수 추정과 억제를 목표로 하는 알고리즘을 설계한다. 제시된 알고리즘은 주파수 추정을 위한 적응관측기(adaptive observer)와 외란 제거를 위한 출력조정기(output regulator)로 구성된다. 기존에 연구에 비하여 모델불확실성에 대한 강인성은 유지하면서 제어기의 초기값(initial value) 설정에 의존하지 않는 안정도 및 성능을 가진다. 제안된 알고리즘은 외란의 주파수를 완벽하게 추정하며, 그 정보를 바탕으로 외란 제거 성능을 보장할 수 있다. 또한, 실제 광디스크 시스템(optical disc drive systems)에 대한 시뮬레이션을 통하여 그 효과를 보여준다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.586-591
• /
• 2001

Dynamic analysis using impulse responses is formulated to estimate effect of slider rail shape on dynamic responses. Impulse responses are obtained on numerical nonlinear model including rigid motion of slider and fluid motion of air bearing under the slider. Dynamic characteristics of slider motion are evaluated by utilizing the decay ratio of impulse responses and modal frequencies from frequency response functions. The dynamic characteristics of the developed NFR(Near Field Recording) slider are checked by comparing those of HDD sider(Nutcracker). Also, sensitivities of slider position conditions and rotation speed on the dynamic characteristics are investigated. The researches show that the utilized method is a good indicator of designing the better slider.