• Journal of the Korean institute of surface engineering
• /
• v.35 no.3
• /
• pp.121-126
• /
• 2002

WC/C multilayered films were deposited by arc ion plating and magnetron sputter hybrid system with various $C_2$H$_2$ flow rates and bias voltages. The coatings have been characterized with respect to their chemical composition (Glow Discharge Optical Emission Spectroscopy), hardness(Knoop micro-hardness), residual stress(Laser beam bending) and friction coefficient(Ball on disc type wear test). Deposition rate, microhardness and residual stress of WC/C films were observed to increase with increasing the $C_2$$H_2$ flow rates. The highest hardness and residual stress were measured to be 26.5 GPa and 1.1GPa for, WC/C film deposited at substrate bias of -100V. WC/C multilayered film was obtained very low friction coefficient(~0.1).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.794-798
• /
• 2002

This paper deals with a moving coil type linear motor for fast access of the miniature ODD. This slim-line motor is composed of the mover supported by guide mechanism, the coil wound into it, and the yoke attached to the permanent magnet for stator. The driving force is generated by the PM of the stator and the current in the coils of the mover. Magnetic circuit analysis and Finite Element Method are applied to estimate the thrust force at air gap. In order to compare the force characteristics between two methods, various experiment results are applied to verify on a prototype. Also the flexible modes of the motor are predicted through the FEM and the structural components are modified to locate this on high frequency region.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.289-289
• /
• 2010

Translation Characteristics of Digital Decoder utilizing the analog parallel processing circuit technology is designed. The fast parallel viterbi decoder system acted by a replacement of the conventional digital viterbi Decoder has good propagation. we are applied proposed analog viterbi decoder to decode PR signal for DVD and analyze the specific circuit and signal characteristics.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.378.2-378
• /
• 2002

This paper deals with a moving coil type linear motor for fast access of the miniature ODD. This slim-line motor is composed of the mover supported by guide mechanism, the coil wound into it, and the yoke attached to the permanent magnet for stator. The driving force is generated by the PM of the stator and the current in the coil of the mover. Magnetic circuit analysis and Finite Element Method are applied to estimate force at air gap. (omitted)

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.162-167
• /
• 2006

Hot embossing lithography(HEL) has the production advantage of comparatively few process step, simple operation, a relatively low cost for embossing tools(Si), and high replication accuracy for small features. In this paper, we considered the nano-molding characteristic according to molding parameters(temperature, pressure, times, etc) and induced a optimal molding condition using HEL. High precision nano-patter master with various shapes were designed and manufactured using the DRIE(Deep Reactive ion Etching), LPCVD(Low Pressure Chemical Vapor Deposition) and thermal oxidation process, and we investigated the molding characteristic of DVD and Blu-ray nickel stamp. We induced flow behaviors of polymer, rheology by shapes and sizes of the pattern through various molding experiments. Finally, with achieving nano-structure molding with high aspect ratio, we will secure a basic technology about the molding of large-area nano-pattern media.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.218-223
• /
• 2002

광 디스크 드라이브에서의 서보 제어시스템에는 광 픽업에서 발생된 레이저 빔을 디스크 기록면의 데이터 트랙에 정확히 위치시키기 위한 제어 계를 갖고 있다. 광 디스크의 고배속화에 따른 외란의 주파수 대역의 증가에 따라 더욱 더 높은 샘플링 주파수로 레이저 빔의 위치 제어를 필요로 하게 되고, 여러 가지 알고리즘의 증가로 인해 DSP의 연산 부담은 증가하게 된다. 본 논문에서는 서보 제어에 필요한 알고리즘의 최적화된 하드웨어/소프트웨어 시스템을 구현하고 이를 이용한 실험 결과를 제시한다.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.745-752
• /
• 1996

Wear property of plasma spray coating in $Cr_2O_3$ powder manufatured of spray dry method on the aluminum substrate was inspected for the application of piston-ring of automotive enginel. The plama spray coatings were varied with feed rate and particle size. Used the ball-on disc type tribometer, wear volume, friction, surface rougness were investigated. The delamination of the coating layer were observed with SEM. Also the cross-section of wear track were investigated, using optical microscopy. As a result of experiment, wear mechanism was addressed in the various coating process.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.655-656
• /
• 2006

A parallel analog Viterbi decoder which decodes PR (1,2,2,1) signal of optical disc has been fabricated into chip. The proposed parallel analog Viterbi decoder implements the functions of the conventional digital Viterbi decoder utilizing the analog parallel processing circuits. In this paper, the analog parallel Viterbi decoding technology is applied for the PR signal. The benefit of analog processing is the low power consumption and the less silicon consumption. The test results of the fabricated chip are reported in this paper.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.651-654
• /
• 2009

Novel compounds with rod and disc mesogens were synthesized and characterized. The molecular structures were confirmed by FT-IR, $^1H$-NMR spectroscopy and elemental analysis. The optical properties of these molecules were investigated by UV-vis absorption spectroscopy and photo-luminescence spectroscopy. We found that they are a novel series of blue light-emitting molecules. The absorption spectra peaks of these compounds varied from 336 nm-341 nm, while the maximum emissions centered form 410 nm-450 nm in chloroform solution. However, unexpectedly we could not found their biaxiality and mesomorphic properties by POM, conoscopy and DSC method.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.6
• /
• pp.117-124
• /
• 2005

This study developes the vibration model to estimate the vibration energy of compact disc player's mainbase assembly which is supported by dampers and springs, and this model is verified by experiment. From frequency response function, we investigate the natural frequency and mode shape in the up/down direction for mainbase assembly. In order to determine the analysis frequency band, we investigate the excitation frequency of road from the vehicle test. As the characteristics of dampers and springs are changed, we carry out the sensitivity analysis of vibration energy for mainbase assembly which include optical pick-up and feeding system. And we found out that the properties of damper were dominant element in the vibration energy of mainbase assembly's CG(center of gravity).