• Electronics and Telecommunications Trends
• /
• v.39 no.1
• /
• pp.48-61
• /
• 2024

The integration of high-capacity terrestrial networks with non-terrestrial communication using satellites has become essential to support seamless low-latency services based on artificial intelligence and big data. Tunable light sources have been instrumental in resolving the complexity of channel management in wavelength division multiplexing (WDM) systems, contributing to increased network flexibility and serving as optical sources for long-distance coherent systems. Recently, these light sources have been applied to beam-steering devices in laser communication and sensing applications across ground, aerial, and satellite transport. We examine the utilization and requirements of tunable lasers in WDM networks and describe the relevant development status. In addition, performance requirements and development directions for tunable lasers used in optical interference systems and beam-steering devices are reviewed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.2948-2963
• /
• 2015

In the field of computer vision, visual surveillance systems have recently become an important research topic. Growth in this area is being driven by both the increase in the availability of inexpensive computing devices and image sensors as well as the general inefficiency of manual surveillance and monitoring. In particular, the ultimate goal for many visual surveillance systems is to provide automatic activity recognition for events at a given site. A higher level of understanding of these activities requires certain lower-level computer vision tasks to be performed. So in this paper, we propose an intelligent activity recognition model that uses a structure learning method and a classification method. The structure learning method is provided as a K2-learning algorithm that generates Bayesian networks of causal relationships between sensors for a given activity. The statistical characteristics of the sensor values and the topological characteristics of the generated graphs are learned for each activity, and then a neural network is designed to classify the current activity according to the features extracted from the multiple sensor values that have been collected. Finally, the proposed method is implemented and tested by using PETS2013 benchmark data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1257-1262
• /
• 2001

In recent years there has been a lot of interest in carrying IP over WDM networks in an efficient manner. The benefits here include larger bandwidth capacities, better network scalability, and more efficient operation. W based approach, termed "lambda-labeling" is presented for direct If over WDM integration. In this paper, we study on architecture approach method consider of optical Internet evolution that based on MPLamdaS conception of IETF. Label stack conception collect electronic LSP of optical LSP. This paper is proposed method of co-operation between MPLS domain and MPLambdaS domain. Additionally, proposed architecture of Edge Optical LSR.tical LSR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.6
• /
• pp.357-364
• /
• 2014

In this paper deals with PON Remote monitoring solution using Reflecting Filter. The current FTTH-PON can not be monitored in real time that Optical cable fault and Quality degradation of Splitter. To solve this problem, Monitoring can make Feeder Network and Splitter that Reflecting filter development using the basic structure of Fiber Bragg grating. Reflecting Filter is Quality Monitoring System shall provide tools for user to view and analyze degradation of cables and splitter in particular predict any gradual component degradation(Optical cable bending, splice, connector, etc) before it becomes service impacting. The Reflecting Filter solution is splitter down and confirm the fault location of optical cable and it will send central control station can be monitored system an alarm to the OLT. In other words, wavelength side branches Mating existing communication affairs (Coupler) using the core of one optical wavelength for live monitoring two wavelengths and sends the subscriber side modem and aggregation switch device remotely using a reflective optical line filter monitoring the study of the system. this study can development of Reflecting filter improve the average processing time of Optical cable fault and efficient Maintenance of the network.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.9
• /
• pp.849-854
• /
• 2016

5G New Radio Access Technology(: RAT) is studied by many researchers because the current radio frequency is insufficient to accommodate the increased mobile communication data traffic. However, there are few researches to study on the issue whether the wired mobile network can accommodate the new RAT. Therefore, in the paper, the study on the issue whether the Radio over Fiber(: RoF) system can accommodate the new RATs such as millimeter wave communication, terahertz communication, and optical wireless communication. As a result of the study, only millimeter wave communication deserve to be considered in ten years and even RoF system may not support the increased bandwidth of the millimeter wave communication when beamforming is used.

• Journal of the Optical Society of Korea
• /
• v.19 no.4
• /
• pp.334-339
• /
• 2015

Terabit-per-second (Tb/s) transmission capacity for the next generation of long-haul communication networks can be achieved using multicarrier optical super-channel technology. In an elastic orthogonal frequency division multiplexing (OFDM) super-channel transmission system, demultiplexing a portion of an entire spectrum in the form of a subband with minimum power is critically required. A major obstacle to achieving this goal is the analog-to-digital converter (ADC), which is power-hungry and extremely expensive. Without a proper ADC that can work with low power, it is unrealistic to design a 100G coherent receiver suitable for a commercially deployable optical network. Discrete Fourier transform (DFT) is often seen as a primary technique for understanding partial demultiplexing, which can be attained either optically or electronically. If fairly comparable performance can be achieved with an all-optical DFT circuit, then a solution independent of data rate and modulation format can be obtained. In this paper, we investigate two distinct OFDM super-channel receiver models, based on electronic and all-optical DFT-technologies, for partial carrier demultiplexing in a multi-Tb/s transmission system. The performance comparison of the receivers is discussed in terms of bit-error-rate (BER) performance.

• Journal of Korea Multimedia Society
• /
• v.22 no.12
• /
• pp.1457-1465
• /
• 2019

3D convolution is to stack multiple consecutive frames to form a cube, and then apply the 3D convolution kernel in the cube. In this structure, each feature map of the convolutional layer is connected to multiple adjacent sequential frames in the previous layer, thus capturing the motion information. However, due to the changes of pedestrian posture, motion and position, the convolution at the same place is inappropriate, and when the 3D convolution kernel is convoluted in the time domain, only time domain features of three consecutive frames can be extracted, which is not a good enough to get action information. This paper proposes an action recognition method based on feature fusion of 3D convolutional neural network. Based on the VGG16 network model, sending a pre-acquired optical flow image for learning, then get the time domain features, and then the feature of the time domain is extracted from the features extracted by the 3D convolutional neural network. Finally, the behavior classification is done by the SVM classifier.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1238-1244
• /
• 2001

Earlier efforts on optical access concentrated on the design of PONs for the collection and distribution portion of the access network. In these networks the optical hardware in the RN is very simple, but a multiple access protocol is needed for upstream traffic control. On the other hand, the role of communications is already well established in the office environment. With the advent of cheap, affordable broadband communications and the increasing complexity of consumer electronics, it seems natural to extend the network into the home. As the application of Home Area Network is ever increasing, we therefore consider connectivity between access network and home network which generates various traffic to design MAC protocol over residential network. Global-FIFO is quite simple and allows dynamic upstream bandwidth assignment on the basis of a request-and-permit mechanism. It has good bandwidth efficiency and being cell-based, it does not consider the various traffic from home network. In this paper, we design and analyze the new MAC resource assignment algorithm called MQ-FIFO (Multiple Queue-FIFO) that provides good performance under the environment of ATM-PON and Home Network.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1555-1560
• /
• 2012

Recently, it has been increasing attention on health care that can provide remote medical service to an aging population, people with disabilities and people having a medical checkup periodically due to increasing people's average life span. Home health care system should provide reasonable cost, on-line basic health status monitoring, embedded basic medical helper function and intuitive interface. In this paper, we developed a prototype of 3G networked pulse measurement system that can detect pulse signal information from subject's fingertip using the optical sensor. The prototype had been analyzed in terms of abnormalities, feeling, timing and pulse counting accuracy. Finally we evaluated its suitability.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.525-532
• /
• 2007

Recently, broadband access networks have been competitively deployed all over the world with the development of various multimedia services for such a network. ETRI(Electronics and Telecommunications Research Institute) built the FTTH(Fiber-to-the-Home) service center to develop a next-generation equipment and a high-quality service/platform as well as to promote domestic industry in the field of optical communication. The FTTH service center has a variety of test equipments such as FTTH standard testbed for a BMT(Bench Mark Test), a network operation center, and IPTV service equipments. Also, ETRI deployed a new type of commercial optical access networks cooperating with ISP(Internet service provider). In this paper, we analyzed the quality degradation appeared in QoE(Quality of Experience), when IP data broadcasted from the FTTH service center is transmitted to subscribers through the commercial optical access network. Moreover, we proposed a noble solution to address this problem.