• Journal of Aerospace System Engineering
• /
• v.10 no.3
• /
• pp.44-51
• /
• 2016

This paper describes the operational concept of the Aegis ship's missile defense. Recently, North Korea conducted a fourth nuclear-weapon test that involved the launch of a long-range missile and the underwater launch of an SLBM. The ground-based BMD (Ballistic Missile Defense) system is very limited for the SLBM of a miniaturized nuclear warhead; therefore, it is necessary to build a reliable sea-based missile-defense system. The ROK Navy has, however, only utilized the Aegis ship that is designed with a search-and-tracking sensor but is without a ballistic-missile interception capability. Given this information, this work focuses on the operational concept of the Aegis BMD by comparing the BMD capabilities of the ROK with those of the U.S.

• International Journal of Automotive Technology
• /
• v.4 no.1
• /
• pp.21-30
• /
• 2003

In this paper a systematic test procedure for evaluation of road-induced noise of a vehicle and guidelines for each test are presented. Also, a practical application of the test procedure to a small SUV is presented. According to the test procedure, all the tests were performed to evaluate road-induced booming noise that is in low frequency range. First of all the information on characteristics of road-induced noise was obtained through baseline test. Coupling effects between body structure and acoustic cavity of a compartment were obtained by means of modal tests for a structure and an acoustic cavity. Local stiffness of joint areas between chassis system and car-body was determined by test for measurement of input point inertance. Noise sensitivities of body joints to operational forces were obtained through test for measurement of noise transfer functions. Operational deflection shapes made us analyze behaviors of chassis system under running condition and then find sources of noise due to resonance of the chassis system. Finally, Principal Component Analysis and Transfer Path Analysis were utilized to investigate main paths of road-induced noise. In order to evaluate road-induced booming noise exactly, all of tests mentioned above should be performed systematically.

• Journal of Applied Reliability
• /
• v.15 no.4
• /
• pp.222-232
• /
• 2015

Purpose : The purpose of this study is to analyse affecting factors of Test and Evaluation and to improve the institution of Test and Evaluation in the Domestic purchase program. Methods : The domestic acquisition program is currently small in terms of size, but it is gradually increasing every year. Still, the domestic purchase program has insufficient regulations and procedures compared to the other procurement methods including research & development. Various problems are likely to occur between test and evaluation group, and defense industries regarding the regulations during Test & Evaluation. Therefore, the regulations and methods need to be amended to upgrade the current domestic purchase program into an effective and flawless one. In this paper, six variables have been chosen by the help of experts working in Ministry of National Defense (MND), Joint Chiefs of Staff (JCS), Army Headquarters and DAPA. Results : The six variables are effectiveness of proposal evaluation, fairness of test and evaluation, sufficiency of operational capabilities, seasonal period of test and evaluation, fulfillment in Integrated Logistics Support (ILS) of the industries, and guaranteeing appropriate environment for related enterprises' participation. Conclusion : This paper can help defense industries to enhance their development capabilities, and to perform tests more fairly and effectively considering the key factors identified in this research.

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.2
• /
• pp.31-38
• /
• 2019

The systems engineering standard process is intended to be customized for a given project environment and system characteristics. This study describes the experience gained by applying systems engineering to government-funded projects. The characteristics of government funded project are lack of common development process among the participating organizations and mechanism to determine system requirements. This study describes the contents of the systems engineering activities, including development of operational concept, system requirements, verification requirements (test cases), test verification plan, and implementation of system test and lessons learned from these activities.

• International Journal of Reliability and Applications
• /
• v.17 no.1
• /
• pp.85-105
• /
• 2016

In this paper accelerated life testing is incorporated in quality control technique of acceptance sampling plan to induce early failures in high reliability products.Stress under accelerated condition can be applied in constant-stress, step-stress and progressive-stress or combination of such loadings. A ramp-stress results when stress is increased linearly (from zero) with time. In this paper optimum failure-censored ramp-stress accelerated life test sampling plan for log-logistic distribution has been formulated with cost considerations. The log-logistic distribution has been found appropriate for insulating materials. The optimal plans consist in finding optimum sample size, sample proportion allocated to each stress, and stress rate factor such that producer's and consumer's interests are safeguarded. Variance optimality criterion is used when expected cost per lot is not taken into consideration, and bilevel programming approach is used in cost optimization problems. The methods developed have been illustrated using some numerical examples, and sensitivity analyses carried out in the context of ramp-stress ALTSP based on variable SSP for proportion nonconforming.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1-6
• /
• 2007

A train is subject to a series of reliability-related tasks through its entire life cycle. Among them the reliability demonstration is required for commercial trains and the test is performed during the commissioning period or the early stage of the commercial operation. On the other hands various test are carried out for prototype trains and hence their operational condition is quit different from that of the commercial trains. One should take account of these differences when reliability assessment is needed for the prototype trains. This paper presents a procedure and an analysis method to evaluate reliability of a prototype train. Reliability data have been obtained through test runs of the HSR-350x and operational conditions for the KTX and HSR-350x have been analyzed to compare the reliability targets of the prototype train.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.1
• /
• pp.42-48
• /
• 2019

Since the underwater telephone was sold in a short time, there are few repair equipments. And equipment is difficult to locate fault. Equipment with transducers must be inspected underwater, and a relative naval vessels is required to perform an operational check. So we developed a tester device to test the transmission card through the spectrum and transmission power, and to develop a device that can conduct operational tests on land. Therefore, the development of the tester reduces the incidence of naval vessels and contributes to the development of domestic underwater communication test equipment.

• Smart Structures and Systems
• /
• v.24 no.5
• /
• pp.597-606
• /
• 2019

Damage detection based on dynamic characteristics of a structure is one of important roles in structural damage identification. It is difficult to detect local structural damage using traditional dynamic experimental methods due to a limited number of sensors used in an experiment. In this work, a non-contact test stand of fan blades is established, and a full-field noncontact test method, combined with three-dimensional digital image correlation, Bayesian operational modal analysis, and damage indices, is used to detect local damage of a fan blade under ambient excitation without use of baseline information before structural damage. The methodology is applied to detect invisible local damage on the fan blade. Such a method has a seemingly high potential as an alternative to detect local damage of blades with complex high-precision surfaces under extreme working conditions because it is a noncontact test method and can be used under ambient excitation without human participation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.805-812
• /
• 2013

The operational flight program(OFP) which has the functions of I/O processing with avionics, flight control logic calculation, fault diagnosis and redundancy mode is embedded in the flight control computer of Smart UAV. The OFP was developed in the environment of PowerPC 755 processor and VxWorks 5.5 real-time operating system. The OFP consists of memory access module, device I/O signal processing module and flight control logic module, and each module was designed to hierarchical structure. Memory access and signal processing modules were verified from bench test, and flight control logic module was verified from hardware-in-the-loop simulation(HILS) test, ground integration test, tethered test and flight test. This paper describes development environment, software structure, verification and management method of the OFP.

• Journal of Drive and Control
• /
• v.21 no.1
• /
• pp.22-30
• /
• 2024

Gearboxes designed for reciprocating motion operating mechanisms operate under conditions where both the load and speed undergo continuous variations. When conducting durability tests on gearboxes designed for such applications, operating the target gearbox under conditions similar to the intended usage is essential. The gearbox must be operated for the required number of cycles to validate its durability under conditions mirroring its intended usage. This study devised an accelerated test method for gearboxes, which reduces operating angles and operational strokes. The reliability of the accelerated test was verified by comparing the stresses imposed on the gears under general and acceleration conditions through multi-body dynamic simulations. The results confirmed that the maximum contact stress levels under normal and accelerated conditions were within a 0.1% error range, indicating a minimal difference in the gear damage rates. However, a difference in the maximum contact stress results between the normal and accelerated conditions was observed when inertial forces acted on the output shaft due to the operational acceleration of the gearbox. Therefore, when conducting this acceleration test, caution should be exercised to ensure that the operational load on the gearbox, which affects inertia, does not significantly deviate from the conditions observed under normal operating conditions.