• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.531-538
• /
• 2017

In the case of hydraulic pressure type fuse, we accept or reject certain product lots by considering the number of defective products in the operating pressure test. Generally, this procedure, known as 'The inspection by attributes', has been most commonly used in the field of quality assurance of products. However, the method of inspection by attributes suffers because it tests more samples than inspection by variables. Even though the quality of the products has remained stable in the process condition, the same number of samples is required for every lot, which wastes time and money. This paper suggests that the lot acceptance procedure is changed from inspection by attributes to inspection by variables. We can calculate the statistical tolerance percent of defectives and compare this to the Acceptable Quality Level (AQL) in order to save money and time. It is also easier to monitor and control the quality of products by using the process capability index and x-bar charts. In conclusion, the procedure delivers mutual benefit to both the customer and the producer by securing high quality products and reference data.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.1
• /
• pp.69-77
• /
• 2000

In retrieving and analyzing digital map information using mouse or key strokes, it needs several times of repeated mouse operation for designating the range of study area. In this study, we proposed a voice activated map information retrieval system for eliminating such repetitions and we realized the system on the personal computer. The system was constructed in two ways - traditional OLE(object linking embedding) method and MFC(Microsoft fundamental class) method in controlling of window display for practical use. In the system performance evaluation, the retrieval data for digital map were consisted of 68 words uttered by 3 male persons which include attribute words and control words for Susung-gu area of Taegu city in a 1:5,000 map. As the results, we obtained the average 98.02% of recognition rate through on-line tests in the office environment and the operating speed of 5.39 seconds by OLE, 10.38 seconds by MFC. These results showed the possibility for practical use of information retrieval system using speech recognition in digital map.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.12
• /
• pp.689-695
• /
• 2015

A biofilm filtration for the removal of gaseous pollutants has been recognized as a process with a complex interaction between the gas flow characteristics and the process operating variables. This study aims to develop an one dimensional dynamic numerical model which can be utilized as a tool for the analysis of biofilm filtration process operated in plug flow mode. Since, in a plug flow system, minor environmental changes in a gaseous unit process cause a drastic change in reaction and the interaction between the pollutants is an influencing factor, plug flow system was generalized in developing the model. For facilitation of the model development, dispersion was simplified based on the principles of material balance. Several reactions such as competition, escalation, and control between the pollutants were included in the model. The applicability of the developed model was evaluated by taking the calibration and verification steps on the experimental data performed for the removal of BTX at both low and high flow concentration. The model demonstrated a correlation coefficient ($R^2$) greater than 0.79 under all the experimental conditions except for the case of toluene at high flow condition, which suggested that this model could be used for the generalized gaseous biofilm plug flow filtration system. In addition, this model could be a useful tool in analyzing the design parameters and evaluating process efficiency of the experiments with substantial amount of complexity and diversity.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.6
• /
• pp.504-509
• /
• 2016

Defects in dissimilar metal welds are reported to be on the increase during the operating lifespan and aging of nuclear power plants. In Korea, reported cases of defects due to dissimilar metal welds include the drain nozzle of a steam generator and RCS hot tube sampling nozzles. Therefore, there is an urgent need to develop a reliable automated nondestructive inspection technique and a system for the inspection of dissimilar metal welds of small diameter nozzles in a high radiation area of a nuclear power plant. In this study, to ensure effective defect inspection of small diameter nozzles (RCS high-temperature tube sampling nozzle) of a nuclear power plant, three different methods were developed. These include: (1) optimum inspection probe design by beam simulation, (2) multi-directions UT optimum inspection technique for the inspection of small diameters of different welded parts, and (3) remote control automatic inspection system. The developed technique and systems have been verified to be suitable for use in the inspection of defects in smaller diameter nozzles in nuclear power plants.

• Journal of Sensor Science and Technology
• /
• v.6 no.6
• /
• pp.500-507
• /
• 1997

For fine control of operating temperature of shape memory alloy, we investigated the effect of thermal teratment of shape memory alloy with the impurity kind. The martensitic transformation temperature in a Cu-17.25Zn-15Al and Cu-17.25Zn-15Al-1Ag/Fe was measured using electrical resistivity as a function of quenching temperature. Order-disorder phase transition temperatures in parent phase were measured and kind of transition were distinguised by DSC(differential scanning calorimeter) with heating rate variation. And structual changes were studied with XRD. For the Cu-17.25Zn-15Al shape memory alloy, the order-disorder phase transition temperature, $T_{B2}$ and $T_{L21}$ was 809K and 610K and for the Cu-17.25Zn-15Al-1Ag and Cu-17.25Zn-15Al-1Fe specimen $T_{B2}$ and $T_{L21}$ was 794K and 610K, and 803K and 613K, respectively. In all the specimens, quenching from near $T_{B2}$ leads to an increase in martensitic temperature, whereas quenching from near $T_{L21}$ leads to an decrease in martensitic temperature.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11C
• /
• pp.1077-1087
• /
• 2003

In this paper, we proposed an architecture of a cryptosystem with various operating modes for the network security and implemented in hardware using the ASIC library. For configuring a cryptosystem, the standard block ciphers such as AES, SEED and 3DES were included. And the implemented cryptosystem can encrypt and decrypt the data in real time through the wired/wireless network with the minimum latency time (minimum 64 clocks, maximum 256 clocks). It can support CTR mode which is widely used recently as well as the conventional block cipher modes such as ECB, CBC and OFB, and operates in the multi-bit mode (64, 128, 192, and 256 bits). The implemented hardware has the expansion possibility for the other algorithms according to the network security protocol such as IPsec and the included ciphering blocks can be operated simultaneously. The self-ciphering mode and various ciphering mode can be supported by the hardware sharing and the programmable data-path. The global operation is programmed by the serial communication port and the operation is decided by the control signals decoded from the instruction by the host. The designed hardware using VHDL was synthesized with Hynix 0.25$\mu\textrm{m}$ CMOS technology and it used the about 100,000 gates. Also we could assure the stable operation in the timing simulation over 100㎒ using NC-verilog.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.240-248
• /
• 2006

In this study, a retrofitting BNR process that was modified for the economical applicability was proposed and evaluated in the pilot plant($50m^3/d$). At the same time the bacterial community structure was investigated in the pilot plant by using FISH(fluorescent in situ hybridization) method. Economically 16% of the initial construction cost for the proposed process(introduction of a biological nutrient removal process of $60,000m^3/d$ scale basis) was reduced due to the absence of a bioreactor. Water treatment efficiencies and maintenance facilities of the modified process were satisfied with the strengthened discharge permits in Korea throughout a long term pilot plant operating including a winter season. Bacterial populations in the pilot plant and in the control plant(A2/O process, B SIP(Sewage Treatment Plant)) were remained uniformly during the test period, but bacterial structure in the bioreactor was changed drastically. Proportions of ${\beta}$-proteobacteria group including soil bacteria which play a important role in wastewater treatment increased $25{\sim}607%$ in population.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.26-36
• /
• 2014

The needs of active phased arrays antenna system is getting more increased for IMT-Advanced system efficiency. The active phased array structure consists of lots of small transceivers and radiation elements to increase system efficiency. The minimized module of high efficiency transceiver is key for system implementation. The power amplifier of transmitter decides efficiency of base-station. In this paper, we design and implement minimized module of high efficiency transceiver for IMT-Advanced active phased array system. The temperature compensation circuit of transceiver reduces gain error and the analog pre-distorter of linearizer reduces implemented size. For minimal size and high efficiency, the implented power amplifier consist of GaN MMIC Doherty structure. The size of implemented module is $40mm{\times}90mm{\times}50mm$ and output power is 47.65 dBm at LTE band 7. The efficiency of power amplifier is 40.7% efficiency and ACLR compensation of linearizer is above 12dB at operating power level, 37dBm. The noise figure of transceiver is under 1.28 dB and amplitude error and phase error on 6 bit control is 0.38 dB and 2.77 degree respectively.

• Nuclear Engineering and Technology
• /
• v.25 no.3
• /
• pp.361-370
• /
• 1993

Low power physics tests should be peformed for the domestic pressurized light water reactors (PWRs) after refueling. The tests are peformed to ensure that operating characteristics of the core are consistent with predictions and that the core can be operated as designed. But in some low power physics tests, slow but steady reactivity increasing phenomena were noticed after step reactivity insertion by the control rod movement. These reactivity increasing phenomena are due to the low flux level and the gamma background because an uncompensated ion chamber (UIC) is used as the ex-core neutron detector. The gamma background may affect the results or the lour power physics tests. The aims or this paper are to analyze the grounds of such phenomena, to simulate a reference bank worth measurement test and to present a resolution quantitatively. In this study, the gamma background level was estimated by numerically solving the point kinetics equations accounting the gamma background effect. The reactivity computer check test was simulated to verify the model. Also, an appropriate neutron flux level was determined by simulating the reference bank worth measurement test. The determined neutron flux level is approximately 0.3 of the nuclear heating flux. This level is about 3 times as high as the current test upper limit specified in the test procedure. Then, the findings from this work were successfully applied to Kori unit 4 cycle 7 and Yonggwang unit 1 cycle 7 physics tests.

• The Journal of Information Technology and Database
• /
• v.5 no.1
• /
• pp.97-108
• /
• 1998

This paper proposes a conceptual taxonomy of architectures for workflow management systems. The systematic classification work is based on a framework for workflow architectures. The framework, consisting of generic-level, conceptual-level and implementation-level architectures, provides common architectural principles for designing a workflow management system. We define the taxonomy by considering the possibilities for centralization or distribution of data, control, and execution. That is, we take into account three criteria. How are the major components of a workflow model and system, like activities, roles, actors, and workcases, concretized in workflow architecture. Which of the components is represented as software modules of the workflow architecture\ulcorner And how are they configured and operating in the architecture\ulcorner The workflow components might be embodied, as active (processes or threads) modules or as passive (data) modules, in the software architecture of a workflow management system. One or combinations of the components might become software modules in the software architecture. Finally, they might be centralized or distributed. The distribution of the components should be broken into three: Vertically, Horizontally and Fully distributed. Through the combination of these aspects, we can conceptually generate about 64 software Architectures for a workflow management system. That is, it should be possible to comprehend and characterize all kinds of software architectures for workflow management systems including the current existing systems as well as future systems. We believe that this taxonomy is a significant contribution because it adds clarity, completeness, and global perspective to workflow architectural discussions. The vocabulary suggested here includes workflow levels and aspects, allowing very different architectures to be discussed, compared, and contrasted. Added clarity is obtained because similar architectures from different vendors that used different terminology and techniques can now be seen to be identical at the higher level. Much of the complexity can be removed by thinking of workflow systems. Therefore, it is used to categorize existing workflow architectures and suggest a plethora of new workflow architectures. Finally, the taxonomy can be used for sorting out gems and stones amongst the architectures possibly generated. Thus, it might be a guideline not only for characterizing the existing workflow management systems, but also for solving the long-term and short-term architectural research issues, such as dynamic changes in workflow, transactional workflow, dynamically evolving workflow, large-scale workflow, etc., that have been proposed in the literature.