• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.1
• /
• pp.173-182
• /
• 2024

While the current share of marine energy in South Korea is less than 1%, it is globally recognized as a resource approximately four times the annual electricity production. Considering the diverse geographical features of the East Sea, South Sea, and West Sea, marine energy development is crucial for South Korea and essential for achieving the 2050 carbon neutrality goal. Policy efforts for marine energy deployment focus on establishing an innovative, open, and integrated R&D system to respond flexibly. The construction of a scientific, economic, and social valid site selection system, along with a maritime spatial planning regime that considers environmental and socio-economic impacts, is emphasized. To expedite the early activation of marine energy, comprehensive policy endeavors, including discriminatory support policies and participation in international standardization, are anticipated to contribute to the sustainable development and dissemination of marine energy. Marine renewable energy plays a significant role in sustainability and addressing climate change, considered an essential component of South Korea's efforts toward carbon neutrality.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.250-256
• /
• 2013

Gasoline generates organic acid and polymer (gum) by hydrocarbon oxidation depending on the storage environment such as temperature and exposure to sunlight, which can cause metal corrosion, rubber and resin degradation and vehicle malfunction caused by accumulation in fuel supply system. The gasoline which has not been used for a long time in bi-fuel (LPG-Gasoline) vehicle causes problems, and low octane number gasoline have evaporated into the field, but the exact cause has not been studied yet. In this study, we suggest a plan of quality management by investigating the gasoline oxidation behavior. In order to investigate the oxidation behavior of gasoline, changes of gasoline properties were analyzed at various storage conditions such as storage time, storage vessel type (vehicle fuel tank, PE vessel and Fe vessel) and storage circumstances (sunlight exposure and open system, etc.). Currently distributing gasoline and bioethanol blended fuel (blended 10%) were stored for 18 weeks in summer season. The sample stored in PE vessel was out of quality standard (octane number, vapor pressure, etc.) due to the evaporation of the high octane number and low boiling point components through the vessel cap and surface. Especially, the sunlight exposure sample stored in PE vessel showed rapid decrease of vapor pressure and increase of gum. Bioethanol blended fuel showed similar results as gasoline.

• Resources Recycling
• /
• v.21 no.4
• /
• pp.76-85
• /
• 2012

Fluorescent lamps generally involve mercury within their lamp bulbs. Thus if the lamps are disposed as they are, it might cause environmental pollution. On the other hand, as the life of the lamps depends on the degradation of the discharge performance, the fluorescent substance composing the fluorescent substance coating can be recycled by reusing them as the recycled fluorescent substance. Also, the glass material composing the glass bulbs can be reused. The range of search was limited in the open patents of USA (US), European Union (EU), Japan (JP), Korea (KR) and SCI journals from 1977 to 2011. Patents and journals were collected using key-words searching and filtered by filtering criteria. The trends of the patents and journals was analyzed by the years, countries, companies, and technologies. Recovery method of metals from spent fluorescent lamps is mainly the focus on the recovery of precious metals using acid treatment and, detoxification technology is related with controlling process of mercury using a filter system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.763-768
• /
• 2016

IT is the information in government/public policy and technological trends in the industry's R&D has a direct impact on its investment decision making of the very important information. Due to the nature of the information in this technical trend because essential information on open public data the technology by government departments and public institutions that are responsible for producing, on an ongoing basis. In this paper, it was confirmed through the experiment that the method and the possibility to integrate the technology trend information provided by the various agencies can be diagnosed as a maturity level. Also we propose a data collection and processing, storage, optimized service for technical maturity of diagnostic methods. The proposed method determines the overall system configuration and service data ITFIND overall maturity level diagnosis is enabled by leveraging the collected. In addition, through the compensation is considered to be able to proceed to a more accurate diagnostic level.

• Journal of Advanced Navigation Technology
• /
• v.24 no.3
• /
• pp.232-237
• /
• 2020

In this paper, a compact microstrip-fed dual-band planar antenna for global positioning system (GPS) and mobile handset applications is presented. Dual operating frequency bands are achieved by an open end L-shaped slot and a bent rectangular slot. The proposed antenna is designed and fabricated on the FR4 substrate with dielectric constant of 4.3, thickness of 1.6 mm and size of 57 × 57 ㎟. The measured impedance bandwidth (|S₁₁|≤ -10dB) of the fabricated antenna is 60 MHz(1550 ~ 1610 MHz) in the GPS band and 670 MHz (1690 ~ 2360 MHz) in the DCS / IMT-2000 band, covering the required bandwidths for GPS(1570 ~ 1580 MHz) and DCS / IMT-2000 (1710 ~ 2200 MHz) bands. In particular, it has been observed that antenna has a good omnidirectional radiation patterns as well as high gain of 2.36 dBi and its efficiency is more than 90 % over the entire frequency band of interest.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.3
• /
• pp.97-106
• /
• 2018

This study aimed at examining the suitability of $Tenax^{(R)}$ for the migration testing of food packaging materials, which is currently approved in the EU as a dry food simulant. The results are used as a basis to examine the feasibility of introducing $Tenax^{(R)}$ to Korean regulation. The OMVs of test specimen into various solvents (diethyl ether, ethanol, pentane, and acetone) after exposure to $100^{\circ}C$ for 1 hr were compared. Diethyl ether showed the highest OMV ($1.33mg/dm^2$) among the solvents tested. When the tests were conducted with different amounts of $Tenax^{(R)}$ of 2, 4, or 8 g per specimen, the OMVs were 0.75, 1.33 and $1.40mg/dm^2$, respectively. The OMV obtained with a closed system after wrapping with aluminum foil showed a significantly higher OMV ($1.61mg/dm^2$) than that without aluminum wrapping ($1.318mg/dm^2w$) and an open system without lid ($1.06mg/dm^2$). The specific migration rates of surrogates spiked in the polyethylene test film and paper samples into $Tenax^{(R)}$ were compared with those into liquid food simulants including 95% ethanol and n-heptane, and actual foods such as starch, skim milk, and sugar. In general, the specific migration levels of surrogates into $Tenax^{(R)}$ were similar compared with n-heptane, however those were significantly higher than into actual foods. These results suggest that $Tenax^{(R)}$ may be used as a food simulant for the long-term preservation of dried foods and paper products. However, more studies need to be conducted to investigate the factors influencing the migration into $Tenax^{(R)}$, such as the types of foods and packaging materials tested, migration conditions, and surrogates properties etc.

• Nutritional Sciences
• /
• v.9 no.1
• /
• pp.48-54
• /
• 2006

Methods have been developed to evaluate the total antioxidant capacity of foods and plasma but limitations are associated with their ability to determine precisely the contribution of lipophilic antioxidants in a lipid milieu as well as interactions among them Thus, we modified the Oxygen Radical Absorbance Capacity (ORAC) assay to determine the peroxyradical scavenging ability of both hydrophilic and lipophilic compartments in plasma The hydrophilic ORAC assay was performed in a phosphate buffer system utilizing 2,2'-azobis (2-amidinopropane) dihydrochloride as a peroxyradical generator and fluorescein as the target The lipophilic ORAC assay was carried out in a dimethylsulfoxide :butyronitrile (DMSO/BN, 9:1 v/v) system using 2,2'-azobis (2,4-dimethyl valeronitrile) as a peroxyradical generator and BODIPY C11 581/591 as the target Analyses were conducted in bovine serum supplemented with water - and lipid - soluble antioxidants and in human plasma. Albumin (0.5$\sim$5 g/dL) and uric acid (0.1$\sim$0.5 $\mu$mol/L) increased hydrophilic ORAC values in a dose-dependent fashion ($R^{2}$=0.97 and 0.98, respectively) but had no impact on lipophilic ORAC values. $\alpha$-Tocopherol (15$\sim$200 $\mu$mol/L) increased lipophilic ORAC values in a dose-dependent fashion ($R^{2}$=0.94); neither $\alpha$-tocopherol nor $\beta$-carotene had an impact on hydrophilic ORAC values. However, addition of $\beta$-carotene at physiological concentration (0.23$\sim$1.86 $\mu$mol/L), either alone or in combination with other carotenoids, had no significant impact on lipophilic ORAC values. Thus, while assays of 'total antioxidant capacity' in biological matrices would be a useful research and clinical tool, existing methods are limited by the lack of complete responsiveness to the full range of dietary antioxidants.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.7
• /
• pp.915-921
• /
• 2020

Thermoacoustic instability caused by air conditioning in a combustion chamber has emerged as a problem that must be solved to establish a stable combustion system. Thermoacoustic instability is largely divided into primary and secondary acoustic instability. In this study, an experimental study of the effects of heat losses was conducted to investigate the mechanism of secondary acoustic instability. To generate the secondary acoustic instability, a quarter-wavelength resonator with one open end and one closed end was used, and the inside of the resonator was filled with premixed gases. Subsequently, secondary acoustic instability with downward-propagating flames could be realized via thermal expansion on the burnt side. To control heat losses qualitatively, an additional co-axial tube was installed in the resonator with air or nitrogen supply. Therefore, additional diffusion flames can be formed at the top of the resonator depending on the injection of the oxidizer into the co-axial tube when rich premixed flames are used. Consequently, secondary acoustic instability could not be achieved by increasing heat losses to the ambient when the additional diffusion flame was not formed, and the opposite result was obtained with the additional diffusion flame.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.3
• /
• pp.809-838
• /
• 2013

Innovation is the development of new customers value through solutions that meet new needs, inarticulate needs, or old customer and market needs in value adding new ways. This is accomplished through more effective products, processes, services, technologies, or ideas that are readily available to markets, governments, and society. Innovation differs from invention in that innovation refers to the use of a better and, as a result, novel idea or method, whereas invention refers more directly to the creation of the idea or method itself. Therefore, the utilization of patents is the most important of the three aspects (creation, protection and utilization) in the patent system for getting to actual innovation. In order to increase the patent use, the rates of the applied patents to a real industrial process and the bargain and license of patent rights should be promoted. For promoting technological innovation substantially, there is necessary to escape from dichotomy of weakening or enhancing patent protection in the discussion on the changes of patent system for "Adequate patent guarantees". Furthermore, the legal and institutional improvements to enable the use of patent should be discussed together. Recently, open innovation is a new paradigm that assumes that firms can and should use external ideas as well as internal ideas, and internal and external paths to market, as the firms look to advance their technology" or "Innovating with partners by sharing risk and sharing reward." The boundaries between a firm and its environment have become more permeable; innovations can easily transfer inward and outward. The central idea behind open innovation is that in a world of widely distributed knowledge, companies cannot afford to rely entirely on their own research, but should instead buy or license processes or inventions (i.e. patents) from other companies. In addition, internal inventions not being used in a firm's business should be taken outside the company. In the era of open innovation, more flexible patent use strategy is essential. It is important that improvements for the legal system in order that patented technology can be applied for products and processes in a real industrial between outside and inside of the firms.

• Progress in Superconductivity
• /
• v.13 no.1
• /
• pp.7-11
• /
• 2011

The effects of Sm:Ba:Cu composition ratio in SmBCO coated conductor on their superconducting properties were investigated. The SmBCO coated conductors were fabricated by reactive co-evaporation method using EDDC(Evaporation using Drum in Dual Chamber) system. In this system, we could obtain various samples with different composition ratios in a batch by the technique providing composition gradient at deposition zone. From the specimens prepared by EDDC system, we found that composition ratio is uniform parallel to the drum axis, but gradient along the circumferential direction of the drum. We installed a shield having parallelogram open area between the deposition chamber and the evaporation chamber in EDDC system, and attached a 30 cm long template, which is parallel to drum axis, onto the drum surface. In this configuration, we could obtain SmBCO coated conductors having a gradient composition along the length of template. We measured the composition ratios and surface morphologies with periodic interval by SEM and EDAX, and confirmed the profile of composition ratio. We also measured critical current using non-contact Hall probe critical current measurement system and thereby could plot composition ratio vs. critical current. The maximum critical current was obtained, and the surface morphology with the shape of roof tile was observed at the corresponding composition ratio of Sm:Ba:Cu = 1.01:1.99:4.87. It was also found that composition ratio had an effect on not only critical current but also surface morphology.