• 한국해안·해양공학회논문집
• /
• 제31권2호
• /
• pp.41-49
• /
• 2019

1개층 Boussinesq 방정식(Vu 등, 2018)과 2개층 Boussinesq 방정식(Huynh 등, 2017)을 사용하여 투수방파제를 지나는 cnoid 파의 월파고를 구하였다. 수치실험을 통해 천단고가 낮은 투수방파제를 지나는 cnoid 파의 월파고(Navier-Stokes 방정식으로 구함)가 천단고가 높은 투수방파제를 지나는 통과파고(1개층 Boussinesq 방정식으로 구함)보다 더 작고, 천단고가 해저에 있는 투수방파제를 지나는 통과파고(2개층 Boussinesq 방정식으로 구함)보다 더 크다는 것을 확인하였다. cnoid 파의 파고가 낮을수록 또는 투수방파제의 폭이 좁을수록 1개층 및 2개층 Boussinesq 방정식으로 구한 통과파고가 Navier-Stokes 방정식으로 구한 월파고에 근접한 것을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제69권1호
• /
• pp.43-50
• /
• 2019

In this research, the effect of bedding layer on the tensile failure mechanism of rocks has been investigated using PFC2D. For this purpose, firstly calibration of PFC2d was performed using Brazilian tensile strength. Secondly Brazilian test was performed on the bedding layer. Thickness of layers were 5 mm, 10 mm and 20 mm. in each thickness layer, layer angles changes from $0^{\circ}$ to $90^{\circ}$ with increment of $15^{\circ}$. Totally, 21 model were simulated and tested by loading rate of 0.016 mm/s. The results show that when layer angle is less than 15, tensile cracks initiates between the layers and propagate till coalesce with model boundary. Its trace is too high. With increasing the layer angle, less layer mobilizes in failure process. Also, the failure trace is very short. It's to be noted that number of cracks decrease with increasing the layer thickness. Also, Brazilian tensile strength is minimum when bedding layer angle is between $45^{\circ}$ and $75^{\circ}$. The maximum one is related to layer angle of $90^{\circ}$.

• 한국정보과학회논문지:시스템및이론
• /
• 제32권11_12호
• /
• pp.629-638
• /
• 2005

시스템 온 칩 설계에서 온 칩 버스는 전체 시스템의 성능을 결정하는 중요한 요소이다. 특히 프로세서, DSP 및 멀티미디어 IP와 같이 보다 높은 버스 대역폭을 요구하는 IP가 사용될 경우 온 칩 버스의 대역폭 문제는 더욱 심각해진다. 이에 따라 최근 ARM 사에서는 고성능 온 칩 버스 구조인 ML-AHB 버스 매트릭스를 제안하였다. ML-AHB 버스 매트릭스는 시스템 내의 다중 마스터와 다중 슬레이브간의 병렬적인 접근 경로를 제공하여 전체 버스 대역폭을 증가시켜주고, 최근 많은 프로세서 요소들을 사용하는 휴대형 기기 및 통신 기기 등에 적합한 고성능 온 칩 버스 구조이다. 하지만 내부 컴포넌트인 입력 스테이지와 무어 타입으로 구현된 중재 방식으로 인해 마스터가 새로운 전송을 수행할 때 또는 슬레이브 레이어를 변경할 때 마다 항상 1 클럭 사이클 지연 현상이 발생된다. 본 논문에서는 이러한 문제점을 해결하기 위해 기존 ML-AHB 버스 매트릭스 구조를 개선하였다. 기존 버스 매트릭스 구조에서 입력 스테이지를 제거하고, 개선된 구조에 적합하도록 중재 방식을 변경하여 1 클럭 사이클 지연 문제를 해결하였다. 개선된 결과 4-beat incrementing 버스트 타입으로 다수의 트랜잭션을 수행할 경우, 기존 ML-AHB 버스 매트릭스에 비해 전체 버스 트랜잭션 종료 시간 및 평균 지연 시간이 각각 약 $20\%,\;24\%$ 정도 짧아졌다. 또한 FPGA의 슬라이스 수는 기존의 ML-AHB 버스 매트릭스보다 약 $22\%$ 정도 감소하였고, 클럭 주기도 약 $29\%$ 정도 짧아졌다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.680-683
• /
• 2006

A one-dimensional planar model is considered of the atmosphere with multi-layer clouds illuminated by a mono-directional parallel flux of solar radiation. A new approach is proposed to radiation transfer modeling and daylight background formation for the atmosphere with such clouds that is represented as a heterogeneous multi-layer system each layer of which is described by different optical characteristics. The influence functions of each layer are determined by solutions of the radiation transfer boundary problem with an external monodirectional wide flux while the contribution of multiple scattering and absorption in the layer is taking into account.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.232-232
• /
• 2010

Simulation Program (AFORS-HET 2.4.1) was used, include the basic structure of crystalline silicon thin film as above, under the intrinsic a-Si:H films bonded symmetrical structure (Symmetrical structure) were used. The structure of ITO, a-Si p-type, intrinsic a-Si, c-Si, intrinsic a-Si, a-Si n-type, metal (Al) layer has one of the seven. When thickness for each layer was given the change, the changes of a-Si p-type layer and the intrinsic a-Si layer on top had an impact on efficiency. Efficiency ratio of p-type a-Si:H layer thickness was sensitive to, especially a-Si: H layer thickness is increased in a rapid decrease in Jsc and FF, and efficiency was also decreased.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.287-292
• /
• 2001

The objective of this study is to verify the secondary flow and the total pressure loss distribution in the boundary layer fence installed linear turbine cascade passage and to propose an appropriate height of the boundary layer fence which shows the best loss reduction among the simulated fences. In this study three different boundary layer fence was installed which have different height. This study was performed by numerical method and the result showed the boundary layer fence which has the height of one third of the inlet boundary layer thickness showed the best loss reduction rate.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.199-202
• /
• 2003

In this paper, we propose a new 3D coding method for heterogeneous systems over enhanced Access Grid (e-AG) with 3D display using spatio-temporal scalability. The proposed encoder produces four bit-streams: one base layer and enhancement layer l, 2 and 3. The base layer represents a video sequence for left eye with lower spatial resolution. An enhancement layer l provides additional bit-stream needed for reproduction of frames produced in base layer with full resolution. Similarly, the enhancement layer 2 represents a video sequence for right eye with lower spatial resolution and an enhancement layer 3 provides additional bit-stream needed for reproduction of its reference pictures with full resolution. In this system, temporal resolution reduction is obtained by dropping B-frames in the receiver according to network condition. The receiver system can select the spatial and temporal resolution of video sequence with its display condition by properly combining bit-streams.

• 한국정밀공학회지
• /
• 제12권11호
• /
• pp.132-139
• /
• 1995

Turbulent boundary layer pressure fluctuation exerted on the surface of a structure can give rise to a elastic stress wave on the surface of the structure. The stress wave so called surface wave, will not only propagate along the surface of structure but also penerate into the structure. To reduce the transmission of stress wave into the structure the elastomer layer is usually attactched on the surface of structure. The transfer function, which is defined herein as the ratio of stress waves at the surface and bottom of the elastomer layer, is derved by use of the cylindrical coordinates system. The elastodynamics of the elastomer layer subjected to the turbulent boundary layer pressure fluctuation is represented by the simplified one degree-of-freedom model for easy prediction of the stress wave transmission as well as efficient design of the elastomer layer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.634-634
• /
• 2013

Transfer molding methods have a problem that weak adhesion between nanostructures and substrates. It is important to make various nano scale applications, also the stability of nanostructure on substrate is related with device performance. We studied an effect of poly 4-vinylphenol (PVP) as the polymeric adhesion layer between organic nanowires and a Si substrate when the nanowires are transferred by liquid-bridge-mediated nanotransfer molding method (LB-nTM). Their structural stability was examined by optical microscopy, scanning electron microscopy as multiple transfer molding and washing process. Field-effect transistors were fabricated with organic semiconductor nanowires on a polymeric adhesion layer and their electrical properties showed no significant difference as the one without the adhesion layer. As a result, adhesion layer can be used in the washing process and making multi-layer nano-scale patterns.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.632-638
• /
• 2002

In novelty detection, one attempts to discriminate abnormal patterns from normal ones. Novelty detection is quite difficult since, unlike usual two class classification problems, only normal patterns are available for training. Auto-Associative Multi-Layer Perceptron (AAMLP) has been shown to provide a good performance based upon the property that novel patterns usually have larger auto-associative errors. In this paper, we give a mathematical analysis of 2-layer AAMLP's output characteristics and empirical results of 2-layer and 4-layer AAMLPs. Various activation functions such as linear, saturated linear and sigmoid are compared. The 2-layer AAMLPs cannot identify non-linear boundaries while the 4-layer ones can. When the data distribution is multi-modal, then an ensemble of AAMLPs, each of which is trained with pre-clustered data is required. This paper contributes to understanding of AAMLP networks and leads to practical recommendations regarding its use.